Section XV: Base Metals and Articles of Base Metal

Chapter

Description

72

Iron and steel
- 7201
  
  Pig iron and spiegeleisen in pigs, blocks or other primary forms:
  - 7201 1000 00
    
    Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus 🖩
  - 7201 2000 00
    
    Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus 🖩
  - 7201 50
    
    Alloy pig iron; spiegeleisen:
    
    7201 5030 00
    
    Alloy pig iron 🖩
    
    7201 5060 00
    
    Spiegeleisen 🖩
- 7202
  
  Ferroalloys:
  - Ferromanganese:
    
    7202 11
    
    Containing by weight more than 2 percent of carbon:
    
    7202 1110 00
    
    Containing by weight more than 2 percent but not more than 4 percent of carbon 🖩
    
    7202 1150 00
    
    Containing by weight more than 4 percent of carbon 🖩
    
    7202 19
    
    Other:
    
    7202 1910 00
    
    Containing by weight not more than 1 percent of carbon 🖩
    
    7202 1950 00
    
    Containing by weight more than 1 percent but not more than 2 percent of carbon 🖩
  - Ferrosilicon:
    
    7202 21
    
    Containing by weight more than 55 percent of silicon:
    
    Containing by weight more than 55 percent but not more than 80 percent of silicon:
    
    7202 2110 00
    
    Containing by weight more than 3 percent of calcium 🖩
    
    7202 2150 00
    
    Other 🖩
    
    7202 2175 00
    
    Containing by weight more than 80 percent but not more than 90 percent of silicon 🖩
    
    7202 2190 00
    
    Containing by weight more than 90 percent of silicon 🖩
    
    7202 2900
    
    Other
    
    7202 2900 10
    
    Containing by weight over 2 percent of magnesium 🖩
    
    7202 2900 50
    
    Other 🖩
  - 7202 3000 00
    
    Ferrosilicon manganese 🖩
  - Ferrochromium:
    
    7202 4100 00
    
    Containing by weight more than 4 percent of carbon 🖩
    
    7202 49
    
    Other:
    
    7202 4910 00
    
    Containing by weight more than 3 percent of carbon 🖩
    
    7202 4950
    
    Other
    
    7202 4950 10
    
    Containing by weight more than 0.5 percent of carbon 🖩
    
    7202 4950 90
    
    Other 🖩
  - 7202 5000 00
    
    Ferrosilicon chromium 🖩
  - 7202 6000 00
    
    Ferronickel 🖩
  - 7202 7000 00
    
    Ferromolybdenum 🖩
  - 7202 8000 00
    
    Ferrotungsten and ferrosilicon tungsten 🖩
  - Other:
    
    7202 9100 00
    
    Ferrotitanium and ferrosilicon titanium 🖩
    
    7202 9200 00
    
    Ferrovanadium 🖩
    
    7202 93
    
    Ferroniobium:
    
    7202 9340 00
    
    Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon 🖩
    
    7202 9380 00
    
    Other 🖩
    
    7202 99
    
    Other:
    
    7202 9910 00
    
    Ferrozirconium 🖩
    
    7202 9920 00
    
    Calcium silicon 🖩
    
    7202 9980
    
    Other
    
    7202 9980 20
    
    Ferrophosphorus 🖩
    
    7202 9980 40
    
    Other 🖩
- 7203
  
  Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms:
  - 7203 1000 00
    
    Ferrous products obtained by direct reduction of iron ore 🖩
  - 7203 9000 00
    
    Other 🖩
- 7204
  
  Ferrous waste and scrap; remelting scrap ingots of iron or steel:
  - 7204 1000 00
    
    Waste and scrap of cast iron 🖩
  - Waste and scrap of alloy steel:
    
    7204 2100 00
    
    Of stainless steel 🖩
    
    7204 2900 00
    
    Other 🖩
  - 7204 3000 00
    
    Waste and scrap of tinned iron or steel 🖩
  - Other waste and scrap:
    
    7204 4100
    
    Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
    
    7204 4100 20
    
    No. 1 bundles 🖩
    
    7204 4100 40
    
    No. 2 bundles 🖩
    
    7204 4100 60
    
    Borings, shovelings and turnings 🖩
    
    7204 4100 80
    
    Other 🖩
    
    7204 4900
    
    Other
    
    7204 4900 20
    
    No. 1 heavy melting 🖩
    
    7204 4900 40
    
    No. 2 heavy melting 🖩
    
    Other:
    
    7204 4900 60
    
    Cut plate and structural 🖩
    
    7204 4900 70
    
    Shredded 🖩
    
    7204 4900 80
    
    Other 🖩
  - 7204 5000 00
    
    Remelting scrap ingots 🖩
- 7205
  
  Granules and powders, of pig iron, spiegeleisen, iron or steel:
  - 7205 1000 00
    
    Granules 🖩
  - Powders:
    
    7205 2100 00
    
    Of alloy steel 🖩
    
    7205 2900 00
    
    Other 🖩
  - II. IRON AND NONALLOY STEEL
- 7206
  
  Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
  - 7206 1000 00
    
    Ingots 🖩
  - 7206 9000 00
    
    Other 🖩
- 7207
  
  Semifinished products of iron or nonalloy steel:
  - Containing by weight less than 0.25 percent of carbon:
    
    7207 1100 00
    
    Of rectangular (including square) cross section, the width measuring less than twice the thickness 🖩
    
    7207 1200
    
    Other, of rectangular (other than square) cross section
    
    7207 1200 10
    
    Having a width measuring less than four times the thickness 🖩
    
    7207 1200 50
    
    Having a width measuring at least four times the thickness 🖩
    
    7207 1900
    
    Other
    
    7207 1900 30
    
    Of circular cross section 🖩
    
    7207 1900 90
    
    Other 🖩
  - 7207 2000
    
    Containing by weight 0.25 percent or more of carbon
    
    Of rectangular (including square) cross section:
    
    7207 2000 25
    
    Having a width measuring less than four times the thickness 🖩
    
    7207 2000 45
    
    Having a width measuring at least four times the thickness 🖩
    
    7207 2000 75
    
    Of circular cross section 🖩
    
    7207 2000 90
    
    Other 🖩
- 7208
  
  Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
  - 7208 10
    
    In coils, not further worked than hot-rolled, with patterns in relief:
    
    7208 1015 00
    
    Pickled 🖩
    
    Other:
    
    7208 1030 00
    
    Of a thickness of 4.75 mm or more 🖩
    
    7208 1060 00
    
    Of a thickness of less than 4.75 mm 🖩
  - Other, in coils, not further worked than hot-rolled, pickled:
    
    7208 25
    
    Of a thickness of 4.75 mm or more:
    
    7208 2530 00
    
    Of high-strength steel 🖩
    
    7208 2560 00
    
    Other 🖩
    
    7208 2600
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    7208 2600 30
    
    High-strength steel 🖩
    
    7208 2600 60
    
    Other 🖩
    
    7208 2700
    
    Of a thickness of less than 3 mm
    
    High-strength steel:
    
    7208 2700 40
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter 🖩
    
    7208 2700 45
    
    Other 🖩
    
    7208 2700 60
    
    Other 🖩
  - Other, in coils, not further worked than hot-rolled:
    
    7208 3600
    
    Of a thickness exceeding 10 mm
    
    7208 3600 30
    
    High-strength steel 🖩
    
    7208 3600 60
    
    Other 🖩
    
    7208 3700
    
    Of a thickness of 4.75 mm or more but not exceeding 10 mm
    
    7208 3700 30
    
    High-strength steel 🖩
    
    7208 3700 60
    
    Other 🖩
    
    7208 3800
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    7208 3800 15
    
    High-strength steel 🖩
    
    Other:
    
    7208 3800 30
    
    With untrimmed edges 🖩
    
    7208 3800 90
    
    Other 🖩
    
    7208 3900
    
    Of a thickness of less than 3 mm
    
    High-strength steel:
    
    7208 3900 20
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter 🖩
    
    7208 3900 25
    
    Other 🖩
    
    Other:
    
    7208 3900 30
    
    With untrimmed edges 🖩
    
    7208 3900 90
    
    Other 🖩
  - 7208 40
    
    Not in coils, not further worked than hot-rolled, with patterns in relief:
    
    7208 4030
    
    Of a thickness of 4.75 mm or more
    
    7208 4030 30
    
    Of a thickness exceeding 10 mm 🖩
    
    7208 4030 60
    
    Other 🖩
    
    7208 4060
    
    Of a thickness of less than 4.75 mm
    
    7208 4060 30
    
    Of a thickness less than 3 mm 🖩
    
    7208 4060 60
    
    Other 🖩
  - Other, not in coils, not further worked than hot-rolled:
    
    7208 5100
    
    Of a thickness exceeding 10 mm
    
    7208 5100 30
    
    Universal mill plate 🖩
    
    Other:
    
    7208 5100 45
    
    Of high-strength steel 🖩
    
    7208 5100 60
    
    Other 🖩
    
    7208 5200 00
    
    Of a thickness of 4.75 mm or more but not exceeding 10 mm 🖩
    
    7208 5300 00
    
    Of a thickness of 3 mm or more but less than 4.75 mm 🖩
    
    7208 5400 00
    
    Of a thickness of less than 3 mm 🖩
  - 7208 9000 00
    
    Other 🖩
- 7209
  
  Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
  - In coils, not further worked than cold-rolled (cold-reduced):
    
    7209 1500 00
    
    Of a thickness of 3 mm or more 🖩
    
    7209 1600
    
    Of a thickness exceeding 1 mm but less than 3 mm
    
    Of high-strength steel:
    
    Annealed:
    
    7209 1600 40
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter 🖩
    
    7209 1600 45
    
    Other 🖩
    
    7209 1600 60
    
    Other 🖩
    
    Other:
    
    7209 1600 70
    
    Annealed 🖩
    
    7209 1600 91
    
    Other 🖩
    
    7209 1700
    
    Of a thickness of 0.5 mm or more but not exceeding 1 mm
    
    Of high-strength steel:
    
    Annealed:
    
    7209 1700 40
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter 🖩
    
    7209 1700 45
    
    Other 🖩
    
    7209 1700 60
    
    Other 🖩
    
    Other:
    
    7209 1700 70
    
    Annealed 🖩
    
    7209 1700 91
    
    Other 🖩
    
    7209 18
    
    Of a thickness of less than 0.5 mm:
    
    7209 1815
    
    Of high-strength steel
    
    7209 1815 30
    
    Annealed 🖩
    
    7209 1815 60
    
    Other 🖩
    
    Other:
    
    7209 1825
    
    Of a thickness of less than 0.361 mm (blackplate)
    
    7209 1825 20
    
    Annealed 🖩
    
    7209 1825 85
    
    Other 🖩
    
    7209 1860
    
    Other
    
    7209 1860 20
    
    Annealed 🖩
    
    7209 1860 90
    
    Other 🖩
  - Not in coils, not further worked than cold-rolled (cold-reduced):
    
    7209 2500 00
    
    Of a thickness of 3 mm or more 🖩
    
    7209 2600 00
    
    Of a thickness exceeding 1 mm but less than 3 mm 🖩
    
    7209 2700 00
    
    Of a thickness of 0.5 mm or more but not exceeding 1 mm 🖩
    
    7209 2800 00
    
    Of a thickness of less than 0.5 mm 🖩
  - 7209 9000 00
    
    Other 🖩
- 7210
  
  Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
  - Plated or coated with tin:
    
    7210 1100 00
    
    Of a thickness of 0.5 mm or more 🖩
    
    7210 1200 00
    
    Of a thickness of less than 0.5 mm 🖩
  - 7210 2000 00
    
    Plated or coated with lead, including terne-plate 🖩
  - 7210 3000
    
    Electrolytically plated or coated with zinc
    
    7210 3000 30
    
    Of high-strength steel 🖩
    
    7210 3000 60
    
    Other 🖩
  - Otherwise plated or coated with zinc:
    
    7210 4100 00
    
    Corrugated 🖩
    
    7210 4900
    
    Other
    
    Of high-strength steel:
    
    7210 4900 40
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter 🖩
    
    7210 4900 45
    
    Other 🖩
    
    Other:
    
    7210 4900 91
    
    Of a thickness of 0.4 mm or more 🖩
    
    7210 4900 95
    
    Other 🖩
  - 7210 5000
    
    Plated or coated with chromium oxides or with chromium and chromium oxides
    
    7210 5000 20
    
    Of a width less than 1050 mm 🖩
    
    7210 5000 90
    
    Other 🖩
  - Plated or coated with aluminum:
    
    7210 6100 00
    
    Plated or coated with aluminum-zinc alloys 🖩
    
    7210 6900 00
    
    Other 🖩
  - 7210 70
    
    Painted, varnished or coated with plastics:
    
    7210 7030 00
    
    Not coated or plated with metal and not clad 🖩
    
    7210 7060
    
    Other
    
    Zinc coated or plated:
    
    7210 7060 30
    
    Electrolytically coated or plated 🖩
    
    7210 7060 60
    
    Other 🖩
    
    7210 7060 90
    
    Other 🖩
  - 7210 90
    
    Other:
    
    7210 9010 00
    
    Clad 🖩
    
    Other:
    
    7210 9060 00
    
    Electrolytically coated or plated with base metal 🖩
    
    7210 9090 00
    
    Other 🖩
- 7211
  
  Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
  - Not further worked than hot-rolled:
    
    7211 1300 00
    
    Universal mill plate 🖩
    
    7211 1400
    
    Other, of a thickness of 4.75 mm or more
    
    7211 1400 30
    
    Of high-strength steel 🖩
    
    Other:
    
    7211 1400 45
    
    Not in coils 🖩
    
    7211 1400 90
    
    Other 🖩
    
    7211 19
    
    Other:
    
    Of a width of less than 300 mm:
    
    7211 1915 00
    
    Of high-strength steel 🖩
    
    Other:
    
    7211 1920 00
    
    Of a thickness exceeding 1.25 mm 🖩
    
    7211 1930 00
    
    Other 🖩
    
    Other:
    
    7211 1945 00
    
    Of high-strength steel 🖩
    
    Other:
    
    7211 1960 00
    
    Pickled 🖩
    
    7211 1975
    
    Other
    
    In coils:
    
    7211 1975 30
    
    With untrimmed edges 🖩
    
    7211 1975 60
    
    Other 🖩
    
    7211 1975 90
    
    Other 🖩
  - Not further worked than cold-rolled (cold-reduced):
    
    7211 23
    
    Containing by weight less than 0.25 percent of carbon:
    
    Of a width of less than 300 mm:
    
    Of a thickness exceeding 1.25 mm:
    
    7211 2315 00
    
    Of high-strength steel 🖩
    
    7211 2320 00
    
    Other 🖩
    
    7211 2330 00
    
    Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm 🖩
    
    7211 2345 00
    
    Of a thickness not exceeding 0.25 mm 🖩
    
    7211 2360
    
    Other
    
    7211 2360 30
    
    Of a thickness exceeding 1.25 mm 🖩
    
    7211 2360 60
    
    Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm 🖩
    
    7211 2360 90
    
    Of a thickness not exceeding 0.25 mm: 🖩
    
    7211 29
    
    Other:
    
    Of a width of less than 300 mm:
    
    7211 2920
    
    Of a thickness exceeding 0.25 mm
    
    7211 2920 30
    
    Of a width less than 51 mm, in coils 🖩
    
    7211 2920 90
    
    Other 🖩
    
    7211 2945 00
    
    Other 🖩
    
    7211 2960
    
    Other
    
    7211 2960 30
    
    Of a thickness exceeding 1.25 mm 🖩
    
    7211 2960 80
    
    Other 🖩
  - 7211 9000 00
    
    Other 🖩
- 7212
  
  Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
  - 7212 1000 00
    
    Plated or coated with tin 🖩
  - 7212 2000 00
    
    Electrolytically plated or coated with zinc 🖩
  - 7212 30
    
    Otherwise plated or coated with zinc:
    
    Of a width of less than 300 mm:
    
    7212 3010
    
    Of a thickness exceeding 0.25 mm or more
    
    7212 3010 30
    
    Of a width less than 51 mm, in coils 🖩
    
    7212 3010 90
    
    Other 🖩
    
    7212 3030 00
    
    Other 🖩
    
    7212 3050 00
    
    Other 🖩
  - 7212 40
    
    Painted, varnished or coated with plastics:
    
    7212 4010 00
    
    Of a width of less than 300 mm 🖩
    
    7212 4050 00
    
    Other 🖩
  - 7212 5000 00
    
    Otherwise plated or coated 🖩
  - 7212 6000 00
    
    Clad 🖩
- 7213
  
  Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
  - 7213 1000 00
    
    Concrete reinforcing bars and rods 🖩
  - 7213 2000
    
    Other, of free-cutting steel
    
    7213 2000 10
    
    Containing by weight 0.1 percent or more of lead 🖩
    
    7213 2000 80
    
    Other 🖩
  - Other:
    
    7213 91
    
    Of circular cross section measuring less than 14 mm in diameter:
    
    7213 9130
    
    Not tempered, not treated and not partly manufactured
    
    7213 9130 11
    
    Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter 🖩
    
    7213 9130 15
    
    Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter 🖩
    
    7213 9130 20
    
    Of welding quality wire rods of a kind described in statistical note 7 to this chapter 🖩
    
    7213 9130 93
    
    Other 🖩
    
    Other:
    
    7213 9145 00
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    7213 9160 00
    
    Other 🖩
    
    7213 9900
    
    Other
    
    Of circular cross section:
    
    7213 9900 30
    
    With a diameter of 14 mm or more but less than 19 mm 🖩
    
    7213 9900 60
    
    With a diameter of 19 mm or more 🖩
    
    7213 9900 90
    
    Other 🖩
- 7214
  
  Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
  - 7214 1000 00
    
    Forged 🖩
  - 7214 2000 00
    
    Concrete reinforcing bars and rods 🖩
  - 7214 3000
    
    Other, of free-cutting steel
    
    7214 3000 10
    
    Containing by weight 0.1 percent or more of lead 🖩
    
    7214 3000 80
    
    Other 🖩
  - Other:
    
    7214 9100
    
    Of rectangular (other than square) cross-section
    
    Containing by weight less than 0.25 percent of carbon:
    
    7214 9100 16
    
    With a maximum cross section less than 152 mm 🖩
    
    7214 9100 20
    
    With a maximum cross section of 152 mm or more 🖩
    
    7214 9100 60
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon 🖩
    
    7214 9100 90
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    7214 9900
    
    Other
    
    Rounds:
    
    Containing by weight less than 0.25 percent of carbon:
    
    7214 9900 16
    
    With a diameter less than 76 mm 🖩
    
    7214 9900 21
    
    With a diameter of 76 mm or more but not exceeding 152 mm 🖩
    
    7214 9900 26
    
    With a diameter exceeding 152 mm 🖩
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
    
    7214 9900 31
    
    With a diameter less than 76 mm 🖩
    
    7214 9900 36
    
    With a diameter of 76 mm or more but not exceeding 152 mm 🖩
    
    7214 9900 40
    
    With a diameter exceeding 152 mm 🖩
    
    7214 9900 45
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    Other:
    
    7214 9900 60
    
    Containing by weight less than 0.25 percent of carbon 🖩
    
    7214 9900 75
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon 🖩
    
    7214 9900 90
    
    Containing by weight 0.6 percent or more of carbon 🖩
- 7215
  
  Other bars and rods of iron or nonalloy steel:
  - 7215 1000
    
    Of free-cutting steel, not further worked than cold-formed or cold-finished
    
    7215 1000 10
    
    Containing by weight 0.1 percent or more of lead 🖩
    
    7215 1000 80
    
    Other 🖩
  - 7215 5000
    
    Other, not further worked than cold-formed or cold-finished
    
    Containing by weight less than 0.25 percent of carbon:
    
    7215 5000 16
    
    With a diameter or cross section measuring less than 76 mm 🖩
    
    7215 5000 18
    
    With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm 🖩
    
    7215 5000 20
    
    With a diameter or cross section exceeding 228 mm 🖩
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
    
    7215 5000 61
    
    With a diameter or cross section measuring less than 76 mm 🖩
    
    7215 5000 63
    
    With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm 🖩
    
    7215 5000 65
    
    With a diameter or cross section exceeding 228 mm 🖩
    
    7215 5000 90
    
    Containing by weight 0.6 percent or more of carbon 🖩
  - 7215 90
    
    Other:
    
    Plated or coated with metal:
    
    7215 9010 00
    
    Not cold-formed 🖩
    
    7215 9030 00
    
    Cold-formed 🖩
    
    7215 9050 00
    
    Other 🖩
- 7216
  
  Angles, shapes and sections of iron or nonalloy steel:
  - 7216 1000
    
    U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
    
    7216 1000 10
    
    U sections 🖩
    
    7216 1000 50
    
    Other 🖩
  - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
    
    7216 2100 00
    
    L sections 🖩
    
    7216 2200 00
    
    T sections 🖩
  - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
    
    7216 3100 00
    
    U sections 🖩
    
    7216 3200 00
    
    I sections (standard beams) 🖩
    
    7216 3300
    
    H sections
    
    7216 3300 30
    
    Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm 🖩
    
    7216 3300 60
    
    Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm 🖩
    
    7216 3300 90
    
    Other 🖩
  - 7216 4000
    
    L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
    
    7216 4000 10
    
    L sections 🖩
    
    7216 4000 50
    
    Other 🖩
  - 7216 5000 00
    
    Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded 🖩
  - Angles, shapes and sections, not further worked than cold-formed or cold-finished:
    
    7216 6100 00
    
    Obtained from flat-rolled products 🖩
    
    7216 6900 00
    
    Other 🖩
  - Other:
    
    7216 9100
    
    Cold-formed or cold-finished from flat-rolled products
    
    7216 9100 10
    
    Drilled, notched, punched or cambered 🖩
    
    7216 9100 90
    
    Other 🖩
    
    7216 9900
    
    Other
    
    7216 9900 10
    
    Drilled, notched, punched or cambered 🖩
    
    7216 9900 90
    
    Other 🖩
- 7217
  
  Wire of iron or nonalloy steel:
  - 7217 10
    
    Not plated or coated, whether or not polished:
    
    Containing by weight less than 0.25 percent of carbon:
    
    Flat wire:
    
    7217 1010 00
    
    Of a thickness not exceeding 0.25 mm 🖩
    
    7217 1020 00
    
    Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm 🖩
    
    7217 1030 00
    
    Of a thickness exceeding 1.25 mm 🖩
    
    Round wire:
    
    7217 1040
    
    With a diameter of less than 1.5 mm
    
    Heat treated:
    
    7217 1040 40
    
    In coils weighing not more than 2 kilograms 🖩
    
    7217 1040 45
    
    Other 🖩
    
    7217 1040 90
    
    Other 🖩
    
    7217 1050
    
    With a diameter of 1.5 mm or more
    
    7217 1050 30
    
    Heat treated 🖩
    
    7217 1050 90
    
    Other 🖩
    
    7217 1060 00
    
    Other wire 🖩
    
    Other:
    
    7217 1070 00
    
    Flat wire 🖩
    
    7217 1080
    
    Round wire
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
    
    7217 1080 10
    
    Heat treated 🖩
    
    7217 1080 20
    
    Other 🖩
    
    Containing by weight 0.6 percent or more of carbon:
    
    Heat treated:
    
    7217 1080 25
    
    With a diameter of less than 1.0 mm 🖩
    
    7217 1080 30
    
    With a diameter of 1.0 mm or more but less than 1.5 mm 🖩
    
    7217 1080 45
    
    With a diameter of 1.5 mm or more 🖩
    
    Other:
    
    7217 1080 60
    
    With a diameter of less than 1.0 mm 🖩
    
    7217 1080 75
    
    With a diameter of 1.0 mm or more but less than 1.5 mm 🖩
    
    7217 1080 90
    
    With a diameter of 1.5 mm or more 🖩
    
    7217 1090 00
    
    Other wire 🖩
  - 7217 20
    
    Plated or coated with zinc:
    
    7217 2015 00
    
    Flat wire 🖩
    
    Round wire:
    
    7217 2030 00
    
    With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon 🖩
    
    7217 2045
    
    Other
    
    With a diameter of less than 1.0 mm:
    
    7217 2045 10
    
    Containing by weight less than 0.25 percent of carbon 🖩
    
    7217 2045 20
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon 🖩
    
    7217 2045 30
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    With a diameter of 1.0 mm or more but less than 1.5 mm:
    
    7217 2045 40
    
    Containing by weight less than 0.25 percent of carbon 🖩
    
    7217 2045 50
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon 🖩
    
    7217 2045 60
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    With a diameter of 1.5 mm or more:
    
    7217 2045 70
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon 🖩
    
    7217 2045 80
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    Other:
    
    7217 2060 00
    
    Containing by weight less than 0.25 percent of carbon 🖩
    
    7217 2075 00
    
    Other 🖩
  - 7217 30
    
    Plated or coated with other base metals:
    
    7217 3015
    
    Flat wire
    
    7217 3015 30
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    7217 3015 60
    
    Other 🖩
    
    Round wire:
    
    7217 3030 00
    
    With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon 🖩
    
    7217 3045
    
    Other
    
    7217 3045 04
    
    Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding 🖩
    
    Other:
    
    With a diameter of less than 1.0 mm:
    
    7217 3045 11
    
    Containing by weight less than 0.25 percent of carbon 🖩
    
    7217 3045 20
    
    Containing by weight 0.25 percent or more but less than 0.6 percent or carbon 🖩
    
    7217 3045 30
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    With a diameter of 1.0 mm or more but less than 1.5 mm:
    
    7217 3045 41
    
    Containing by weight less than 0.25 percent of carbon 🖩
    
    7217 3045 50
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon 🖩
    
    7217 3045 60
    
    Containing by weight 0.6 percent or more of carbon 🖩
    
    7217 3045 90
    
    With a diameter of 1.5 mm or more 🖩
    
    Other:
    
    7217 3060 00
    
    Containing by weight less than 0.25 percent of carbon 🖩
    
    7217 3075 00
    
    Other 🖩
  - 7217 90
    
    Other:
    
    7217 9010 00
    
    Coated with plastics 🖩
    
    7217 9050
    
    Other
    
    7217 9050 30
    
    Containing by weight less than 0.25 percent of carbon 🖩
    
    7217 9050 60
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon 🖩
    
    7217 9050 90
    
    Containing by weight 0.6 percent or more of carbon 🖩
  - III. STAINLESS STEEL
- 7218
  
  Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
  - 7218 1000 00
    
    Ingots and other primary forms 🖩
  - Other:
    
    7218 9100
    
    Of rectangular (other than square) cross-section
    
    Having a width less than four times the thickness:
    
    7218 9100 15
    
    Having a cross-sectional area of less than 232 cm2 🖩
    
    7218 9100 30
    
    Having a cross-sectional area of 232 cm2 or more 🖩
    
    7218 9100 60
    
    Having a width at least four times the thickness 🖩
    
    7218 9900
    
    Other
    
    Of square cross section:
    
    7218 9900 15
    
    Having a cross-sectional area of less than 232 cm2 🖩
    
    7218 9900 30
    
    Having a cross-sectional area of 232 cm2 or more 🖩
    
    Of circular cross section:
    
    7218 9900 45
    
    Having a cross-sectional area of less than 232 cm2 🖩
    
    7218 9900 60
    
    Having a cross-sectional area of 232 cm2 or more 🖩
    
    7218 9900 90
    
    Other 🖩
- 7219
  
  Flat-rolled products of stainless steel, of a width of 600 mm or more:
  - Not further worked than hot-rolled, in coils:
    
    7219 1100
    
    Of a thickness exceeding 10 mm
    
    7219 1100 30
    
    Of a width not exceeding 1575 mm 🖩
    
    7219 1100 60
    
    Of a width exceeding 1575 mm 🖩
    
    7219 1200
    
    Of a thickness of 4.75 mm or more but not exceeding 10 mm
    
    7219 1200 02
    
    Not annealed or not pickled 🖩
    
    Other:
    
    7219 1200 06
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Of a width of 1370 mm or more:
    
    Of a thickness exceeding 6.8 mm:
    
    7219 1200 21
    
    Of a width not exceeding 1575 mm 🖩
    
    7219 1200 26
    
    Of a width exceeding 1575 mm 🖩
    
    Other:
    
    7219 1200 51
    
    Of a width not exceeding 1575 mm 🖩
    
    7219 1200 56
    
    Of a width exceeding 1575 mm 🖩
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 1200 66
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7219 1200 71
    
    Other 🖩
    
    7219 1200 81
    
    Other 🖩
    
    7219 1300
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    7219 1300 02
    
    Not annealed or not pickled 🖩
    
    Other:
    
    7219 1300 31
    
    Of a width of 1370 mm or more 🖩
    
    Other:
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7219 1300 51
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7219 1300 71
    
    Other 🖩
    
    7219 1300 81
    
    Other 🖩
    
    7219 1400
    
    Of a thickness of less than 3 mm
    
    7219 1400 30
    
    Of a width of 1370 mm or more 🖩
    
    Other:
    
    7219 1400 65
    
    Of high-nickel alloy steel 🖩
    
    7219 1400 90
    
    Other 🖩
  - Not further worked than hot-rolled, not in coils:
    
    7219 2100
    
    Of a thickness exceeding 10 mm
    
    7219 2100 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7219 2100 20
    
    Of a width not exceeding 1575 mm 🖩
    
    7219 2100 40
    
    Of a width exceeding 1575 mm but not exceeding 1880 mm 🖩
    
    7219 2100 60
    
    Of a width exceeding 1880 mm 🖩
    
    7219 2200
    
    Of a thickness of 4.75 mm or more but not exceeding 10 mm
    
    7219 2200 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum:
    
    7219 2200 15
    
    Of a width not exceeding 1575 mm 🖩
    
    7219 2200 20
    
    Of a width exceeding 1575 mm but not exceeding 1880 mm 🖩
    
    7219 2200 25
    
    Of a width exceeding 1880 mm 🖩
    
    Other:
    
    7219 2200 35
    
    Of a width not exceeding 1575 mm 🖩
    
    7219 2200 40
    
    Of a width exceeding 1575 mm but not exceeding 1880 mm 🖩
    
    7219 2200 45
    
    Of a width exceeding 1880 mm 🖩
    
    Other:
    
    7219 2200 70
    
    Of a width not exceeding 1575 mm 🖩
    
    7219 2200 75
    
    Of a width exceeding 1575 mm but not exceeding 1880 mm 🖩
    
    7219 2200 80
    
    Of a width exceeding 1880 mm 🖩
    
    7219 2300
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    7219 2300 30
    
    Of a width of 1370 mm or more 🖩
    
    7219 2300 60
    
    Other 🖩
    
    7219 2400
    
    Of a thickness of less than 3 mm
    
    7219 2400 30
    
    Of a width of 1370 mm or more 🖩
    
    7219 2400 60
    
    Other 🖩
  - Not further worked than cold-rolled (cold-reduced):
    
    7219 3100
    
    Of a thickness of 4.75 mm or more
    
    7219 3100 10
    
    In coils 🖩
    
    7219 3100 50
    
    Not in coils 🖩
    
    7219 3200
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    In coils:
    
    Of a width of 1370 mm or more:
    
    7219 3200 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7219 3200 20
    
    Containing more than 0.5 percent by weight of nickel 🖩
    
    7219 3200 25
    
    Other 🖩
    
    Other:
    
    7219 3200 35
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 3200 36
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7219 3200 38
    
    Other 🖩
    
    Other:
    
    7219 3200 42
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7219 3200 44
    
    Other 🖩
    
    Not in coils:
    
    7219 3200 45
    
    Of a width of 1370 mm or more 🖩
    
    7219 3200 60
    
    Other 🖩
    
    7219 3300
    
    Of a thickness exceeding 1 mm but less than 3 mm
    
    In coils:
    
    Of a width of 1370 mm or more:
    
    7219 3300 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7219 3300 20
    
    Containing more than 0.5 percent by weight of nickel 🖩
    
    7219 3300 25
    
    Other 🖩
    
    Other:
    
    7219 3300 35
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 3300 36
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7219 3300 38
    
    Other 🖩
    
    Other:
    
    7219 3300 42
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7219 3300 44
    
    Other 🖩
    
    Not in coils:
    
    7219 3300 45
    
    Of a width of 1370 mm or more 🖩
    
    Other:
    
    7219 3300 70
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel 🖩
    
    7219 3300 80
    
    Other 🖩
    
    7219 3400
    
    Of a thickness of 0.5 mm or more but not exceeding 1 mm
    
    In coils:
    
    7219 3400 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 3400 20
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7219 3400 25
    
    Other 🖩
    
    Other:
    
    7219 3400 30
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7219 3400 35
    
    Other 🖩
    
    7219 3400 50
    
    Not in coils 🖩
    
    7219 3500
    
    Of a thickness of less than 0.5 mm
    
    In coils:
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7219 3500 05
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7219 3500 15
    
    Other 🖩
    
    Other:
    
    7219 3500 30
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7219 3500 35
    
    Other 🖩
    
    7219 3500 50
    
    Not in coils 🖩
  - 7219 9000
    
    Other
    
    7219 9000 10
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 9000 20
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7219 9000 25
    
    Other 🖩
    
    Other:
    
    7219 9000 60
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7219 9000 80
    
    Other 🖩
- 7220
  
  Flat-rolled products of stainless steel, of a width of less than 600 mm:
  - Not further worked than hot-rolled:
    
    7220 1100 00
    
    Of a thickness of 4.75 mm or more 🖩
    
    7220 12
    
    Of a thickness of less than 4.75 mm:
    
    7220 1210 00
    
    Of a width of 300 mm or more 🖩
    
    7220 1250 00
    
    Of a width of less than 300 mm 🖩
  - 7220 20
    
    Not further worked than cold-rolled (cold-reduced):
    
    7220 2010
    
    Of a width of 300 mm or more
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7220 2010 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7220 2010 15
    
    Other 🖩
    
    Other:
    
    7220 2010 60
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7220 2010 80
    
    Other 🖩
    
    Of a width of less than 300 mm:
    
    7220 2060
    
    Of a thickness exceeding 1.25 mm
    
    7220 2060 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7220 2060 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7220 2060 15
    
    Other 🖩
    
    Other:
    
    7220 2060 60
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7220 2060 80
    
    Other 🖩
    
    7220 2070
    
    Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
    
    7220 2070 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7220 2070 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7220 2070 15
    
    Other 🖩
    
    Other:
    
    7220 2070 60
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7220 2070 80
    
    Other 🖩
    
    Of a thickness not exceeding 0.25 mm:
    
    7220 2080 00
    
    Razor blade steel 🖩
    
    7220 2090
    
    Other
    
    7220 2090 30
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel 🖩
    
    7220 2090 60
    
    Other 🖩
  - 7220 9000
    
    Other
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7220 9000 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7220 9000 15
    
    Other 🖩
    
    Other:
    
    7220 9000 60
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7220 9000 80
    
    Other 🖩
- 7221 0000
  
  Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
  - 7221 0000 05
    
    Of high-nickel alloy steel 🖩
  - Other:
    
    Of circular cross section:
    
    With a diameter of less than 14 mm:
    
    7221 0000 17
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7221 0000 18
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
    
    7221 0000 30
    
    With a diameter of 14 mm or more but less than 19 mm 🖩
    
    7221 0000 45
    
    With a diameter of 19 mm or more 🖩
    
    7221 0000 75
    
    Other 🖩
- 7222
  
  Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
  - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
    
    7222 1100
    
    Of circular cross-section
    
    7222 1100 01
    
    Electroslag or vacuum arc remelted 🖩
    
    7222 1100 06
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    With a maximum cross-sectional dimension of less than 152.4 mm:
    
    7222 1100 57
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 1100 59
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
    
    With a maximum cross-sectional dimension of 152.4 mm or more:
    
    7222 1100 82
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 1100 84
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
    
    7222 1900
    
    Other
    
    7222 1900 01
    
    Electroslag or vacuum arc remelted 🖩
    
    Other:
    
    7222 1900 06
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7222 1900 52
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 1900 54
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
  - 7222 2000
    
    Bars and rods, not further worked than cold-formed or cold-finished
    
    7222 2000 01
    
    Electroslag or vacuum arc remelted 🖩
    
    7222 2000 06
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Of a circular cross-section:
    
    With a maximum circular cross-sectional dimension of less than 18 mm:
    
    7222 2000 41
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 2000 43
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
    
    With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm:
    
    7222 2000 62
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 2000 64
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
    
    With a maximum circular cross-sectional dimension of 152.4 mm or more:
    
    7222 2000 67
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 2000 69
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
    
    Other:
    
    7222 2000 71
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 2000 73
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
  - 7222 3000
    
    Other bars and rods
    
    7222 3000 01
    
    Electroslag or vacuum arc remelted 🖩
    
    7222 3000 12
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    With a maximum cross-sectional dimension of less than 152.4 mm:
    
    7222 3000 22
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 3000 24
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
    
    With a maximum cross-sectional dimension of 152.4 mm or more:
    
    7222 3000 82
    
    Containing less than 8 percent by weight of nickel 🖩
    
    7222 3000 84
    
    Containing 8 percent or more but less than 24 percent by weight of nickel 🖩
  - 7222 40
    
    Angles, shapes and sections:
    
    7222 4030
    
    Hot-rolled, not drilled, not punched and not otherwise advanced
    
    With a maximum cross-sectional dimension of 80 mm or more:
    
    7222 4030 25
    
    Angles 🖩
    
    7222 4030 45
    
    Other 🖩
    
    With a maximum cross-sectional dimension of less than 80 mm:
    
    7222 4030 65
    
    Angles 🖩
    
    7222 4030 85
    
    Other 🖩
    
    7222 4060 00
    
    Other 🖩
- 7223 00
  
  Wire of stainless steel:
  - 7223 0010
    
    Round wire
    
    7223 0010 05
    
    Spring round wire of a kind described in statistical note 8 to this chapter 🖩
    
    Other:
    
    7223 0010 16
    
    With a diameter of less than 0.25 mm 🖩
    
    7223 0010 31
    
    With a diameter of 0.25 mm or more but less than 0.76 mm 🖩
    
    7223 0010 46
    
    With a diameter of 0.76 mm or more but less than 1.52 mm 🖩
    
    7223 0010 61
    
    With a diameter of 1.52 mm or more but less than 5.1 mm 🖩
    
    7223 0010 76
    
    With a diameter of 5.1 mm or more 🖩
  - 7223 0050 00
    
    Flat wire 🖩
  - 7223 0090 00
    
    Other 🖩
  - IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NONALLOY STEEL
- 7224
  
  Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
  - 7224 1000
    
    Ingots and other primary forms
    
    7224 1000 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7224 1000 45
    
    Of tool steel 🖩
    
    7224 1000 75
    
    Other 🖩
  - 7224 9000
    
    Other
    
    7224 9000 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Of tool steel:
    
    Of rectangular (including square) cross section:
    
    7224 9000 15
    
    Having a width less than four times the thickness 🖩
    
    7224 9000 25
    
    Having a width at least four times the thickness 🖩
    
    7224 9000 35
    
    Other 🖩
    
    Other:
    
    Of rectangular (including square) cross section:
    
    7224 9000 45
    
    Having a width less than four times the thickness 🖩
    
    7224 9000 55
    
    Having a width at least four times the thickness 🖩
    
    7224 9000 65
    
    Of circular cross section 🖩
    
    7224 9000 75
    
    Other 🖩
- 7225
  
  Flat-rolled products of other alloy steel, of a width of 600 mm or more:
  - Of silicon electrical steel:
    
    7225 1100 00
    
    Grain-oriented 🖩
    
    7225 1900 00
    
    Other 🖩
  - 7225 30
    
    Other, not further worked than hot-rolled, in coils:
    
    Of a thickness of 4.75 mm or more:
    
    7225 3011
    
    Of tool steel
    
    7225 3011 10
    
    Of high-speed steel 🖩
    
    7225 3011 80
    
    Other 🖩
    
    7225 3030
    
    Other
    
    7225 3030 05
    
    Of high-nickel alloy steel 🖩
    
    7225 3030 50
    
    Other 🖩
    
    Of a thickness of less than 4.75 mm:
    
    7225 3051
    
    Of tool steel
    
    7225 3051 10
    
    Of high-speed steel 🖩
    
    7225 3051 80
    
    Other 🖩
    
    7225 3070 00
    
    Other 🖩
  - 7225 40
    
    Other, not further worked than hot-rolled, not in coils:
    
    Of a thickness of 4.75 mm or more:
    
    7225 4011
    
    Of tool steel
    
    7225 4011 10
    
    Of high-speed steel 🖩
    
    7225 4011 80
    
    Other 🖩
    
    7225 4030
    
    Other
    
    7225 4030 05
    
    Of high-nickel alloy steel 🖩
    
    7225 4030 50
    
    Other 🖩
    
    Of a thickness of less than 4.75 mm:
    
    7225 4051
    
    Of tool steel
    
    7225 4051 10
    
    Of high-speed steel 🖩
    
    7225 4051 30
    
    Of ball-bearing steel 🖩
    
    7225 4051 60
    
    Other 🖩
    
    7225 4070 00
    
    Other 🖩
  - 7225 50
    
    Other, not further worked than cold-rolled (cold-reduced):
    
    7225 5011
    
    Of tool steel
    
    7225 5011 10
    
    Of high-speed steel 🖩
    
    7225 5011 30
    
    Of ball-bearing steel 🖩
    
    7225 5011 60
    
    Other 🖩
    
    Other:
    
    7225 5060 00
    
    Of a thickness of 4.75 mm or more 🖩
    
    Of a thickness of less than 4.75 mm:
    
    7225 5070 00
    
    Heat-resisting steel 🖩
    
    7225 5080
    
    Other
    
    7225 5080 10
    
    Of high-nickel alloy steel 🖩
    
    7225 5080 80
    
    Other 🖩
  - Other:
    
    7225 9100 00
    
    Electrolytically plated or coated with zinc 🖩
    
    7225 9200 00
    
    Otherwise plated or coated with zinc 🖩
    
    7225 9900
    
    Other
    
    7225 9900 10
    
    Of high-nickel alloy steel 🖩
    
    7225 9900 90
    
    Other 🖩
- 7226
  
  Flat-rolled products of other alloy steel, of a width of less than 600 mm:
  - Of silicon electrical steel:
    
    7226 11
    
    Grain-oriented:
    
    7226 1110 00
    
    Of a width of 300 mm or more 🖩
    
    7226 1190
    
    Of a width of less than 300 mm
    
    7226 1190 30
    
    Of thickness not exceeding 0.25 mm 🖩
    
    7226 1190 60
    
    Other 🖩
    
    7226 19
    
    Other:
    
    7226 1910 00
    
    Of a width of 300 mm or more 🖩
    
    7226 1990 00
    
    Of a width of less than 300 mm 🖩
  - 7226 2000 00
    
    Of high-speed steel 🖩
  - Other:
    
    7226 91
    
    Not further worked than hot-rolled:
    
    Of tool steel (other than high-speed steel):
    
    7226 9105 00
    
    Of chipper knife steel 🖩
    
    Other:
    
    7226 9115
    
    Of a width of 300 mm or more
    
    7226 9115 30
    
    Of ball-bearing steel 🖩
    
    7226 9115 60
    
    Other 🖩
    
    7226 9125
    
    Of a width of less than 300 mm
    
    7226 9125 30
    
    Of ball-bearing steel 🖩
    
    7226 9125 60
    
    Other 🖩
    
    Other:
    
    7226 9150 00
    
    Of a thickness of 4.75 mm or more 🖩
    
    Of a thickness of less than 4.75 mm:
    
    7226 9170 00
    
    Of a width of 300 mm or more 🖩
    
    7226 9180 00
    
    Of a width of less than 300 mm 🖩
    
    7226 92
    
    Not further worked than cold-rolled (cold-reduced):
    
    Of tool steel (other than high-speed steel):
    
    7226 9210
    
    Of a width of 300 mm or more
    
    7226 9210 30
    
    Of ball-bearing steel 🖩
    
    7226 9210 60
    
    Other 🖩
    
    7226 9230
    
    Of a width of less than 300 mm
    
    7226 9230 30
    
    Of ball-bearing steel 🖩
    
    7226 9230 60
    
    Other 🖩
    
    Other:
    
    7226 9250 00
    
    Of a width of 300 mm or more 🖩
    
    Of a width of less than 300 mm:
    
    7226 9270
    
    Of a thickness not exceeding 0.25 mm
    
    7226 9270 05
    
    Of high-nickel alloy steel 🖩
    
    7226 9270 50
    
    Other 🖩
    
    7226 9280
    
    Of a thickness exceeding 0.25 mm
    
    7226 9280 05
    
    Of high-nickel alloy steel 🖩
    
    7226 9280 50
    
    Other 🖩
    
    7226 9901
    
    Other
    
    7226 9901 10
    
    Electrolytically plated or coated with zinc 🖩
    
    7226 9901 30
    
    Otherwise plated or coated with zinc 🖩
    
    7226 9901 80
    
    Other 🖩
- 7227
  
  Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
  - 7227 1000 00
    
    Of high-speed steel 🖩
  - 7227 2000
    
    Of silico-manganese steel
    
    7227 2000 30
    
    Of welding quality wire rods of a kind described in statistical note 7 to this chapter 🖩
    
    7227 2000 80
    
    Other 🖩
  - 7227 90
    
    Other:
    
    Of tool steel (other than high-speed steel):
    
    7227 9010
    
    Not tempered, not treated, and not partly manufactured
    
    7227 9010 30
    
    Of ball-bearing steel 🖩
    
    7227 9010 60
    
    Other 🖩
    
    7227 9020
    
    Other
    
    7227 9020 30
    
    Of ball-bearing steel 🖩
    
    7227 9020 60
    
    Other 🖩
    
    7227 9060
    
    Other
    
    7227 9060 05
    
    Of high-nickel alloy steel 🖩
    
    7227 9060 10
    
    Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter 🖩
    
    7227 9060 20
    
    Of welding quality wire rods of a kind described in statistical note 7 to this chapter 🖩
    
    Of a circular cross section:
    
    7227 9060 30
    
    With a diameter of less than 14 mm 🖩
    
    7227 9060 35
    
    With a diameter of 14 mm or more but less than 19 mm 🖩
    
    7227 9060 40
    
    With a diameter of 19 mm or more 🖩
    
    7227 9060 90
    
    Other 🖩
- 7228
  
  Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
  - 7228 1000
    
    Bars and rods, of high-speed steel
    
    7228 1000 10
    
    Not cold-formed 🖩
    
    Cold-formed:
    
    7228 1000 30
    
    With a maximum cross-sectional dimension of less than 18 mm 🖩
    
    7228 1000 60
    
    With a maximum cross-sectional dimension of 18 mm or more 🖩
  - 7228 20
    
    Bars and rods, of silico-manganese steel:
    
    7228 2010 00
    
    Not cold-formed 🖩
    
    7228 2050 00
    
    Cold-formed 🖩
  - Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
    
    7228 30
    
    Of tool steel (other than high-speed steel):
    
    7228 3020 00
    
    Of ball-bearing steel 🖩
    
    7228 3040 00
    
    Of chipper knife steel, not cold-formed 🖩
    
    7228 3060 00
    
    Other 🖩
    
    7228 3080
    
    Other
    
    7228 3080 05
    
    Of high-nickel alloy steel 🖩
    
    7228 3080 10
    
    Concrete reinforcing bars and rods 🖩
    
    Other:
    
    7228 3080 15
    
    With a diameter or cross section measuring less than 76 mm 🖩
    
    7228 3080 41
    
    With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm 🖩
    
    7228 3080 45
    
    With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm 🖩
    
    7228 3080 70
    
    With a diameter or cross section exceeding 228 mm 🖩
  - 7228 4000 00
    
    Other bars and rods, not further worked than forged 🖩
  - 7228 50
    
    Other bars and rods, not further worked than cold-formed or cold-finished:
    
    7228 5010
    
    Of tool steel (other than high-speed steel)
    
    7228 5010 10
    
    Of ball-bearing steel 🖩
    
    Other:
    
    With a maximum cross-sectional dimension of less than 18 mm:
    
    7228 5010 20
    
    Of round or rectangular cross section with surfaces ground, milled or polished 🖩
    
    7228 5010 40
    
    Other 🖩
    
    With a maximum cross-sectional dimension of 18 mm or more:
    
    7228 5010 60
    
    Of round or rectangular cross section with surfaces ground, milled or polished 🖩
    
    7228 5010 80
    
    Other 🖩
    
    7228 5050
    
    Other
    
    7228 5050 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7228 5050 15
    
    With a diameter or cross section measuring less than 76 mm 🖩
    
    7228 5050 40
    
    With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm 🖩
    
    7228 5050 70
    
    With a diameter or cross section exceeding 228 mm 🖩
  - 7228 60
    
    Other bars and rods:
    
    7228 6010
    
    Of tool steel (other than high-speed steel)
    
    7228 6010 30
    
    Of ball-bearing steel 🖩
    
    7228 6010 60
    
    Other 🖩
    
    Other:
    
    7228 6060 00
    
    Not cold-formed 🖩
    
    7228 6080 00
    
    Cold-formed 🖩
  - 7228 70
    
    Angles, shapes and sections:
    
    7228 7030
    
    Hot-rolled, not drilled, not punched and not otherwise advanced
    
    7228 7030 10
    
    U, I, H and T sections 🖩
    
    Other:
    
    With a maximum cross-sectional dimension of 76 mm or more:
    
    7228 7030 20
    
    Angles 🖩
    
    7228 7030 41
    
    Other 🖩
    
    With a maximum cross-sectional dimension of less than 76 mm:
    
    7228 7030 60
    
    Angles 🖩
    
    7228 7030 81
    
    Other 🖩
    
    7228 7060 00
    
    Other 🖩
  - 7228 8000 00
    
    Hollow drill bars and rods 🖩
- 7229
  
  Wire of other alloy steel:
  - 7229 2000
    
    Of silico-manganese steel
    
    Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding:
    
    7229 2000 10
    
    Plated or coated with copper 🖩
    
    7229 2000 15
    
    Other 🖩
    
    7229 2000 90
    
    Other 🖩
  - 7229 90
    
    Other:
    
    7229 9005 00
    
    Of high-speed steel 🖩
    
    Other:
    
    7229 9010 00
    
    Flat wire 🖩
    
    7229 9050
    
    Round wire
    
    With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding:
    
    7229 9050 06
    
    Plated or coated with copper 🖩
    
    7229 9050 08
    
    Other 🖩
    
    Other:
    
    7229 9050 16
    
    With a diameter of less than 1.0 mm 🖩
    
    7229 9050 31
    
    With a diameter of 1.0 mm or more but less than 1.5 mm 🖩
    
    7229 9050 51
    
    With a diameter of 1.5 mm or more 🖩
    
    7229 9090 00
    
    Other wire 🖩
73

Articles of iron or steel
- 7301
  
  Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel:
  - 7301 1000 00
    
    Sheet piling 🖩
  - 7301 20
    
    Angles, shapes and sections:
    
    7301 2010 00
    
    Of iron or nonalloy steel 🖩
    
    7301 2050 00
    
    Of alloy steel 🖩
- 7302
  
  Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails:
  - 7302 10
    
    Rails:
    
    7302 1010
    
    Of iron or nonalloy steel
    
    New:
    
    Not heat treated:
    
    7302 1010 10
    
    Standard tee rails over 30 kg per meter 🖩
    
    Other:
    
    7302 1010 15
    
    Over 30 kg per meter 🖩
    
    7302 1010 25
    
    Other 🖩
    
    Heat treated:
    
    7302 1010 35
    
    Standard tee rails over 30 kg per meter 🖩
    
    Other:
    
    7302 1010 45
    
    Over 30 kg per meter 🖩
    
    7302 1010 55
    
    Other 🖩
    
    Used:
    
    7302 1010 65
    
    Railway rails for rerolling 🖩
    
    7302 1010 75
    
    Other 🖩
    
    7302 1050
    
    Of alloy steel
    
    7302 1050 20
    
    New 🖩
    
    Used:
    
    7302 1050 40
    
    Railway rails for rerolling 🖩
    
    7302 1050 60
    
    Other 🖩
  - 7302 3000 00
    
    Switch blades, crossing frogs, point rods and other crossing pieces 🖩
  - 7302 4000 00
    
    Fish-plates and sole plates 🖩
  - 7302 90
    
    Other:
    
    7302 9010 00
    
    Sleepers (cross-ties) 🖩
    
    7302 9090 00
    
    Other 🖩
- 7303 0000
  
  Tubes, pipes and hollow profiles, of cast iron
  - 7303 0000 30
    
    Soil pipe 🖩
  - 7303 0000 60
    
    Pressure pipe with an inside diameter of less than 356 mm 🖩
  - 7303 0000 90
    
    Other 🖩
- 7304
  
  Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:
  - Line pipe of a kind used for oil or gas pipelines:
    
    7304 1100
    
    Of stainless steel
    
    7304 1100 20
    
    Having an outside diameter not exceeding 114.3 mm 🖩
    
    7304 1100 50
    
    Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm 🖩
    
    7304 1100 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    7304 19
    
    Other:
    
    7304 1910
    
    Of iron or nonalloy steel
    
    7304 1910 20
    
    Having an outside diameter not exceeding 114.3 mm 🖩
    
    7304 1910 30
    
    Having an outside diameter exceeding 114.3 mm but less than 215.9 mm 🖩
    
    Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm:
    
    7304 1910 45
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 1910 60
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    7304 1910 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    7304 1950
    
    Of other alloy steel
    
    7304 1950 20
    
    Having an outside diameter not exceeding 114.3 mm 🖩
    
    7304 1950 50
    
    Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm 🖩
    
    7304 1950 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
  - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
    
    7304 2200
    
    Drill pipe of stainless steel
    
    Having an outside diameter not exceeding 168.3 mm:
    
    7304 2200 30
    
    Having a wall thickness not exceeding 9.5 mm 🖩
    
    7304 2200 45
    
    Having a wall thickness exceeding 9.5 mm 🖩
    
    7304 2200 60
    
    Having an outside diameter exceeding 168.3 mm 🖩
    
    7304 23
    
    Other drill pipe:
    
    7304 2330 00
    
    Of iron or nonalloy steel 🖩
    
    7304 2360
    
    Of alloy steel
    
    Having an outside diameter not exceeding 168.3 mm:
    
    7304 2360 30
    
    Having a wall thickness not exceeding 9.5 mm 🖩
    
    7304 2360 45
    
    Having a wall thickness exceeding 9.5 mm 🖩
    
    7304 2360 60
    
    Having an outside diameter exceeding 168.3 mm 🖩
    
    7304 24
    
    Other, of stainless steel:
    
    Casing:
    
    7304 2430
    
    Threaded or coupled
    
    Having an outside diameter less than 215.9 mm:
    
    7304 2430 10
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2430 20
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
    
    7304 2430 30
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2430 40
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    7304 2430 45
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm 🖩
    
    7304 2430 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    7304 2440
    
    Other
    
    Having an outside diameter less than 215.9 mm:
    
    7304 2440 10
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2440 20
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
    
    7304 2440 30
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2440 40
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
    
    7304 2440 50
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2440 60
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    7304 2440 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    7304 2460
    
    Tubing
    
    Having an outside diameter not exceeding 114.3 mm:
    
    7304 2460 15
    
    Having a wall thickness not exceeding 9.5 mm 🖩
    
    7304 2460 30
    
    Having a wall thickness exceeding 9.5 mm 🖩
    
    7304 2460 45
    
    Having an outside diameter exceeding 114.3 mm but less than 215.9 mm 🖩
    
    7304 2460 60
    
    Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm 🖩
    
    7304 2460 75
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    7304 29
    
    Other:
    
    Casing:
    
    Of iron or nonalloy steel:
    
    7304 2910
    
    Threaded or coupled
    
    Having an outside diameter less than 215.9 mm:
    
    7304 2910 10
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2910 20
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
    
    7304 2910 30
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2910 40
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
    
    7304 2910 50
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2910 60
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    7304 2910 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    7304 2920
    
    Other
    
    Having an outside diameter less than 215.9 mm:
    
    7304 2920 10
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2920 20
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
    
    7304 2920 30
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2920 40
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
    
    7304 2920 50
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2920 60
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    7304 2920 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    Of other alloy steel:
    
    7304 2931
    
    Threaded or coupled
    
    Having an outside diameter less than 215.9 mm:
    
    7304 2931 10
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2931 20
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
    
    7304 2931 30
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2931 40
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
    
    7304 2931 50
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2931 60
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    7304 2931 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    7304 2941
    
    Other
    
    Having an outside diameter less than 215.9 mm:
    
    7304 2941 10
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2941 20
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
    
    7304 2941 30
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2941 40
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
    
    7304 2941 50
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 2941 60
    
    Having a wall thickness of 12.7 mm or more 🖩
    
    7304 2941 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    Tubing:
    
    7304 2950
    
    Of iron or nonalloy steel
    
    Having an outside diameter not exceeding 114.3 mm:
    
    7304 2950 15
    
    Having a wall thickness not exceeding 9.5 mm 🖩
    
    7304 2950 30
    
    Having a wall thickness exceeding 9.5 mm 🖩
    
    7304 2950 45
    
    Having an outside diameter exceeding 114.3 mm but less than 215.9 mm 🖩
    
    7304 2950 60
    
    Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm 🖩
    
    7304 2950 75
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    7304 2961
    
    Of other alloy steel
    
    Having an outside diameter not exceeding 114.3 mm:
    
    7304 2961 15
    
    Having a wall thickness not exceeding 9.5 mm 🖩
    
    7304 2961 30
    
    Having a wall thickness exceeding 9.5 mm 🖩
    
    7304 2961 45
    
    Having an outside diameter exceeding 114.3 mm but less than 215.9 mm 🖩
    
    7304 2961 60
    
    Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm 🖩
    
    7304 2961 75
    
    Having an outside diameter exceeding 406.4 mm 🖩
  - Other, of circular cross section, of iron or nonalloy steel:
    
    7304 31
    
    Cold-drawn or cold-rolled (cold-reduced):
    
    7304 3130 00
    
    Hollow bars 🖩
    
    7304 3160
    
    Other
    
    7304 3160 10
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters 🖩
    
    7304 3160 50
    
    Other 🖩
    
    7304 3900
    
    Other
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters:
    
    7304 3900 02
    
    Having an outside diameter less than 38.1 mm 🖩
    
    7304 3900 04
    
    Having an outside diameter of 38.1 mm or more but less than 190.5 mm 🖩
    
    7304 3900 06
    
    Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm 🖩
    
    7304 3900 08
    
    Having an outside diameter exceeding 285.8 mm 🖩
    
    Other:
    
    7304 3900 16
    
    Galvanized, having an outside diameter not exceeding 114.3 mm 🖩
    
    Other:
    
    7304 3900 20
    
    Having an outside diameter less than 38.1 mm 🖩
    
    Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm:
    
    7304 3900 24
    
    Having a wall thickness less than 6.4 mm 🖩
    
    7304 3900 28
    
    Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm 🖩
    
    7304 3900 32
    
    Having a wall thickness exceeding 12.7 mm 🖩
    
    Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
    
    7304 3900 36
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 3900 40
    
    Having a wall thickness of 12.7 mm or more but less than 19 mm 🖩
    
    7304 3900 44
    
    Having a wall thickness of 19 mm or more 🖩
    
    Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm:
    
    7304 3900 48
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 3900 52
    
    Having a wall thickness of 12.7 mm or more but less than 19 mm 🖩
    
    7304 3900 56
    
    Having a wall thickness of 19 mm or more 🖩
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
    
    7304 3900 62
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 3900 68
    
    Having a wall thickness of 12.7 mm or more but less than 19 mm 🖩
    
    7304 3900 72
    
    Having a wall thickness of 19 mm or more 🖩
    
    Having an outside diameter exceeding 406.4 mm:
    
    7304 3900 76
    
    Having a wall thickness less than 19 mm 🖩
    
    7304 3900 80
    
    Having a wall thickness of 19 mm or more 🖩
  - Other, of circular cross section, of stainless steel:
    
    7304 41
    
    Cold-drawn or cold-rolled (cold-reduced):
    
    7304 4130
    
    Of an external diameter of less than 19 mm
    
    7304 4130 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7304 4130 15
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters 🖩
    
    7304 4130 45
    
    Other 🖩
    
    7304 4160
    
    Other
    
    7304 4160 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7304 4160 15
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters 🖩
    
    7304 4160 45
    
    Other 🖩
    
    7304 4900
    
    Other
    
    7304 4900 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7304 4900 15
    
    Hollow bars 🖩
    
    Other:
    
    7304 4900 45
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters 🖩
    
    7304 4900 60
    
    Other 🖩
  - Other, of circular cross section, of other alloy steel:
    
    7304 51
    
    Cold-drawn or cold-rolled (cold-reduced):
    
    7304 5110 00
    
    Suitable for use in the manufacture of ball or roller bearings 🖩
    
    7304 5150
    
    Other
    
    7304 5150 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters:
    
    7304 5150 15
    
    Of heat-resisting steel 🖩
    
    7304 5150 45
    
    Other 🖩
    
    7304 5150 60
    
    Other 🖩
    
    7304 59
    
    Other:
    
    7304 5910 00
    
    Suitable for use in the manufacture of ball or roller bearings 🖩
    
    Other:
    
    7304 5920
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
    
    7304 5920 30
    
    Of heat-resisting steel 🖩
    
    Other:
    
    7304 5920 40
    
    Having an outside diameter less than 38.1 mm 🖩
    
    7304 5920 45
    
    Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm 🖩
    
    7304 5920 55
    
    Having an outside diameter exceeding 114.3 mm but less than 190.5 mm 🖩
    
    7304 5920 60
    
    Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm 🖩
    
    7304 5920 70
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm 🖩
    
    7304 5920 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
    
    Other:
    
    7304 5960 00
    
    Of heat-resisting steel 🖩
    
    7304 5980
    
    Other
    
    7304 5980 10
    
    Having an outside diameter less than 38.1 mm 🖩
    
    Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm:
    
    7304 5980 15
    
    Having a wall thickness less than 6.4 mm 🖩
    
    7304 5980 20
    
    Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm 🖩
    
    7304 5980 25
    
    Having a wall thickness exceeding 12.7 mm 🖩
    
    Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
    
    7304 5980 30
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 5980 35
    
    Having a wall thickness of 12.7 mm or more but less than 19 mm 🖩
    
    7304 5980 40
    
    Having a wall thickness of 19 mm or more 🖩
    
    Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm:
    
    7304 5980 45
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 5980 50
    
    Having a wall thickness of 12.7 mm or more but less than 19 mm 🖩
    
    7304 5980 55
    
    Having a wall thickness of 19 mm or more 🖩
    
    Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
    
    7304 5980 60
    
    Having a wall thickness less than 12.7 mm 🖩
    
    7304 5980 65
    
    Having a wall thickness of 12.7 mm or more but less than 19 mm 🖩
    
    7304 5980 70
    
    Having a wall thickness of 19 mm or more 🖩
    
    7304 5980 80
    
    Having an outside diameter exceeding 406.4 mm 🖩
  - 7304 90
    
    Other:
    
    Having a wall thickness of 4 mm or more:
    
    7304 9010 00
    
    Of iron or nonalloy steel 🖩
    
    7304 9030 00
    
    Of alloy steel 🖩
    
    Having a wall thickness of less than 4 mm:
    
    7304 9050 00
    
    Of iron or nonalloy steel 🖩
    
    7304 9070 00
    
    Of alloy steel 🖩
- 7305
  
  Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel:
  - Line pipe of a kind used for oil or gas pipelines:
    
    7305 11
    
    Longitudinally submerged arc welded:
    
    7305 1110
    
    Of iron or nonalloy steel
    
    7305 1110 30
    
    With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm 🖩
    
    7305 1110 60
    
    With an external diameter exceeding 609.6 mm 🖩
    
    7305 1150 00
    
    Of alloy steel 🖩
    
    7305 12
    
    Other, longitudinally welded:
    
    7305 1210
    
    Of iron or nonalloy steel
    
    7305 1210 30
    
    With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm 🖩
    
    7305 1210 60
    
    With an external diameter exceeding 609.6 mm 🖩
    
    7305 1250 00
    
    Of alloy steel 🖩
    
    7305 19
    
    Other:
    
    7305 1910
    
    Of iron or nonalloy steel
    
    7305 1910 30
    
    With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm 🖩
    
    7305 1910 60
    
    With an external diameter exceeding 609.6 mm 🖩
    
    7305 1950 00
    
    Of alloy steel 🖩
  - 7305 20
    
    Casing of a kind used in drilling for oil or gas:
    
    Of iron or nonalloy steel:
    
    7305 2020 00
    
    Threaded or coupled 🖩
    
    7305 2040 00
    
    Other 🖩
    
    Of alloy steel:
    
    7305 2060 00
    
    Threaded or coupled 🖩
    
    7305 2080 00
    
    Other 🖩
  - Other, welded:
    
    7305 31
    
    Longitudinally welded:
    
    7305 3120 00
    
    Tapered pipes and tubes of steel principally used as parts of illuminating articles 🖩
    
    Other:
    
    7305 3140 00
    
    Of iron or nonalloy steel 🖩
    
    7305 3160
    
    Of alloy steel
    
    7305 3160 10
    
    Of stainless steel 🖩
    
    7305 3160 90
    
    Other 🖩
    
    7305 39
    
    Other:
    
    7305 3910 00
    
    Of iron or nonalloy steel 🖩
    
    7305 3950 00
    
    Of alloy steel 🖩
  - 7305 90
    
    Other:
    
    7305 9010 00
    
    Of iron or nonalloy steel 🖩
    
    7305 9050 00
    
    Of alloy steel 🖩
- 7306
  
  Other tubes, pipes and hollow profiles (for example, open seamed or welded, riveted or similarly closed), of iron or steel:
  - Line pipe of a kind used for oil or gas pipelines:
    
    7306 1100
    
    Welded, of stainless steel
    
    7306 1100 10
    
    With an outside diameter not exceeding 114.3 mm 🖩
    
    7306 1100 50
    
    With an outside diameter exceeding 114.3 mm 🖩
    
    7306 19
    
    Other:
    
    7306 1910
    
    Of iron or nonalloy steel
    
    7306 1910 10
    
    With an outside diameter not exceeding 114.3 mm 🖩
    
    7306 1910 50
    
    With an outside diameter exceeding 114.3 mm 🖩
    
    7306 1951
    
    Of alloy steel
    
    7306 1951 10
    
    With an outside diameter not exceeding 114.3 mm 🖩
    
    7306 1951 50
    
    With an outside diameter exceeding 114.3 mm 🖩
  - Casing and tubing of a kind used in drilling for oil or gas:
    
    7306 21
    
    Welded of stainless steel:
    
    Casing:
    
    7306 2130 00
    
    Threaded or coupled 🖩
    
    7306 2140 00
    
    Other 🖩
    
    7306 2180
    
    Tubing
    
    7306 2180 10
    
    Imported with coupling 🖩
    
    7306 2180 50
    
    Other 🖩
    
    7306 29
    
    Other:
    
    Casing:
    
    Of iron or nonalloy steel:
    
    7306 2910
    
    Threaded or coupled
    
    7306 2910 30
    
    Imported with coupling 🖩
    
    7306 2910 90
    
    Other 🖩
    
    7306 2920 00
    
    Other 🖩
    
    Other:
    
    7306 2931 00
    
    Threaded or coupled 🖩
    
    7306 2941 00
    
    Other 🖩
    
    Tubing:
    
    7306 2960
    
    Of iron or nonalloy steel
    
    7306 2960 10
    
    Imported with coupling 🖩
    
    7306 2960 50
    
    Other 🖩
    
    7306 2981
    
    Other
    
    7306 2981 10
    
    Imported with coupling 🖩
    
    7306 2981 50
    
    Other 🖩
  - 7306 30
    
    Other, welded, of circular cross section, of iron or nonalloy steel:
    
    7306 3010 00
    
    Having a wall thickness of less than 1.65 mm 🖩
    
    Having a wall thickness of 1.65 mm or more:
    
    7306 3030 00
    
    Tapered steel pipes and tubes principally used as parts of illuminating articles 🖩
    
    7306 3050
    
    Other
    
    7306 3050 10
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn 🖩
    
    7306 3050 15
    
    Other, cold-drawn 🖩
    
    7306 3050 20
    
    Other, cold-rolled (cold-reduced) with a wall thickness not exceeding 2.54 mm 🖩
    
    Other:
    
    With an outside diameter not exceeding 114.3 mm:
    
    Galvanized:
    
    Imported with coupling:
    
    7306 3050 26
    
    With an outside diameter not exceeding 50.8 mm 🖩
    
    7306 3050 27
    
    With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm 🖩
    
    7306 3050 28
    
    Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit 🖩
    
    Other:
    
    7306 3050 31
    
    With an outside diameter not exceeding 50.8 mm 🖩
    
    7306 3050 33
    
    With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm 🖩
    
    Other:
    
    7306 3050 35
    
    Tube and pipe hollows for redrawing 🖩
    
    Imported with coupling:
    
    7306 3050 41
    
    With an outside diameter not exceeding 50.8 mm 🖩
    
    7306 3050 43
    
    With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm 🖩
    
    Other:
    
    7306 3050 56
    
    With an outside diameter not exceeding 50.8 mm 🖩
    
    7306 3050 57
    
    With an outside diameter exceeding 50.8 mm but not exceeding 114.3 mm 🖩
    
    With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
    
    7306 3050 85
    
    Galvanized 🖩
    
    7306 3050 90
    
    Other 🖩
  - 7306 40
    
    Other, welded, of circular cross section, of stainless steel:
    
    7306 4010
    
    Having a wall thickness of less than 1.65 mm
    
    Containing more than 0.5 percent by weight of nickel:
    
    7306 4010 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7306 4010 15
    
    Other 🖩
    
    7306 4010 90
    
    Other 🖩
    
    7306 4050
    
    Having a wall thickness of 1.65 mm or more
    
    7306 4050 05
    
    Of high-nickel alloy steel 🖩
    
    Other:
    
    7306 4050 15
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn 🖩
    
    Other, cold-drawn or cold-rolled (cold- reduced):
    
    7306 4050 40
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel 🖩
    
    Other:
    
    7306 4050 42
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7306 4050 44
    
    Other 🖩
    
    Other:
    
    With an outside diameter not exceeding 114.3 mm:
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7306 4050 62
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7306 4050 64
    
    Other 🖩
    
    7306 4050 80
    
    Other 🖩
    
    With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
    
    7306 4050 85
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel 🖩
    
    7306 4050 90
    
    Other 🖩
  - 7306 50
    
    Other, welded, of circular cross section, of other alloy steel:
    
    7306 5010 00
    
    Having a wall thickness of less than 1.65 mm 🖩
    
    Having a wall thickness of 1.65 mm or more:
    
    7306 5030 00
    
    Tapered pipes and tubes of steel principally used as parts of illuminating articles 🖩
    
    7306 5050
    
    Other
    
    7306 5050 10
    
    Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn 🖩
    
    7306 5050 30
    
    Other, cold-drawn or cold-rolled (cold- reduced) 🖩
    
    Other:
    
    7306 5050 50
    
    With an outside diameter not exceeding 114.3 mm 🖩
    
    7306 5050 70
    
    With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm 🖩
  - Other, welded, of noncircular cross section:
    
    7306 61
    
    Of square or rectangular cross section:
    
    Having a wall thickness of 4 mm or more:
    
    7306 6110 00
    
    Of iron or nonalloy steel 🖩
    
    7306 6130 00
    
    Of alloy steel 🖩
    
    Having a wall thickness of less than 4 mm:
    
    7306 6150 00
    
    Of iron or nonalloy steel 🖩
    
    7306 6170
    
    Of alloy steel
    
    7306 6170 30
    
    Of stainless steel 🖩
    
    7306 6170 60
    
    Other 🖩
    
    7306 69
    
    Of other noncircular cross section:
    
    Having a wall thickness of 4 mm or more:
    
    7306 6910 00
    
    Of iron or nonalloy steel 🖩
    
    7306 6930 00
    
    Of alloy steel 🖩
    
    Having a wall thickness of less than 4 mm:
    
    7306 6950 00
    
    Of iron or nonalloy steel 🖩
    
    7306 6970
    
    Of alloy steel
    
    7306 6970 30
    
    Of stainless steel 🖩
    
    7306 6970 60
    
    Other 🖩
  - 7306 90
    
    Other:
    
    7306 9010 00
    
    Of iron or nonalloy steel 🖩
    
    7306 9050 00
    
    Of alloy steel 🖩
- 7307
  
  Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel:
  - Cast fittings:
    
    7307 1100
    
    Of nonmalleable cast iron
    
    7307 1100 30
    
    For threaded pipe 🖩
    
    Other:
    
    7307 1100 45
    
    For cast-iron soil pipe 🖩
    
    7307 1100 60
    
    Other 🖩
    
    7307 19
    
    Other:
    
    7307 1930
    
    Ductile fittings
    
    7307 1930 40
    
    Grooved-end fittings (including grooved couplings) 🖩
    
    Other:
    
    7307 1930 60
    
    Threaded 🖩
    
    7307 1930 70
    
    With mechanical, push-on (rubber compression) or flanged joints attached 🖩
    
    7307 1930 85
    
    Other 🖩
    
    7307 1990
    
    Other
    
    7307 1990 30
    
    Unions 🖩
    
    Other:
    
    7307 1990 40
    
    Grooved-end fittings (including grooved couplings) 🖩
    
    Other:
    
    7307 1990 60
    
    Threaded 🖩
    
    7307 1990 80
    
    Other 🖩
  - Other, of stainless steel:
    
    7307 21
    
    Flanges:
    
    7307 2110 00
    
    Not machined, not tooled and not otherwise processed after forging 🖩
    
    7307 2150 00
    
    Other 🖩
    
    7307 22
    
    Threaded elbows, bends and sleeves:
    
    7307 2210 00
    
    Sleeves (couplings) 🖩
    
    7307 2250 00
    
    Other 🖩
    
    7307 2300
    
    Butt welding fittings
    
    7307 2300 30
    
    Not machined, not tooled and not otherwise processed after forming 🖩
    
    7307 2300 90
    
    Other 🖩
    
    7307 2900
    
    Other
    
    7307 2900 30
    
    Nipples 🖩
    
    7307 2900 90
    
    Other 🖩
  - Other:
    
    7307 91
    
    Flanges:
    
    Not machined, not tooled and not otherwise processed after forging:
    
    7307 9110 00
    
    Of iron or nonalloy steel 🖩
    
    7307 9130 00
    
    Of alloy steel (except stainless steel) 🖩
    
    7307 9150
    
    Other
    
    With an inside diameter of less than 360 mm:
    
    7307 9150 10
    
    Of iron or nonalloy steel 🖩
    
    7307 9150 30
    
    Of alloy steel (except stainless steel) 🖩
    
    With an inside diameter of 360 mm or more:
    
    7307 9150 50
    
    Of iron or nonalloy steel 🖩
    
    7307 9150 70
    
    Of alloy steel (except stainless steel) 🖩
    
    7307 92
    
    Threaded elbows, bends and sleeves:
    
    7307 9230
    
    Sleeves (couplings)
    
    7307 9230 10
    
    Of iron or nonalloy steel 🖩
    
    7307 9230 30
    
    Of alloy steel (except stainless steel) 🖩
    
    7307 9290 00
    
    Other 🖩
    
    7307 93
    
    Butt welding fittings:
    
    With an inside diameter of less than 360 mm:
    
    7307 9330
    
    Of iron or nonalloy steel
    
    7307 9330 10
    
    Not machined, not tooled and not otherwise processed after forging 🖩
    
    7307 9330 40
    
    Other 🖩
    
    7307 9360 00
    
    Of alloy steel (except stainless steel) 🖩
    
    7307 9390
    
    With an inside diameter of 360 mm or more
    
    Of iron or nonalloy steel:
    
    7307 9390 10
    
    Not machined, not tooled and not otherwise processed after forging 🖩
    
    7307 9390 40
    
    Other 🖩
    
    7307 9390 60
    
    Of alloy steel (except stainless steel) 🖩
    
    7307 99
    
    Other:
    
    Not machined, not tooled and not otherwise processed after forging:
    
    7307 9910 00
    
    Of iron or nonalloy steel 🖩
    
    7307 9930 00
    
    Of alloy steel (except stainless steel) 🖩
    
    7307 9950
    
    Other
    
    Of iron or nonalloy steel:
    
    7307 9950 15
    
    Nipples 🖩
    
    7307 9950 45
    
    Other 🖩
    
    7307 9950 60
    
    Of alloy steel (except stainless steel) 🖩
- 7308
  
  Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:
  - 7308 1000 00
    
    Bridges and bridge sections 🖩
  - 7308 2000
    
    Towers and lattice masts
    
    7308 2000 30
    
    Tubular, whether or not tapered, and sectional components thereof 🖩
    
    7308 2000 35
    
    Tubular wind turbine towers, whether or not tapered, and sectional components thereof 🖩
    
    7308 2000 90
    
    Other 🖩
  - 7308 30
    
    Doors, windows and their frames and thresholds for doors:
    
    7308 3010 00
    
    Of stainless steel 🖩
    
    7308 3050
    
    Other
    
    7308 3050 15
    
    Windows and their frames 🖩
    
    7308 3050 25
    
    Thresholds for doors 🖩
    
    7308 3050 50
    
    Other 🖩
  - 7308 4000 00
    
    Equipment for scaffolding, shuttering, propping or pit- propping 🖩
  - 7308 90
    
    Other:
    
    Columns, pillars, posts, beams, girders and similar structural units:
    
    7308 9030 00
    
    Not in part of alloy steel 🖩
    
    7308 9060 00
    
    Other 🖩
    
    Other:
    
    7308 9070 00
    
    Steel grating 🖩
    
    7308 9095
    
    Other
    
    7308 9095 30
    
    Sheet-metal roofing, siding, flooring and roof drainage equipment 🖩
    
    Other:
    
    7308 9095 60
    
    Architectural and ornamental work 🖩
    
    7308 9095 90
    
    Other 🖩
- 7309 0000
  
  Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
  - 7309 0000 30
    
    Tanks 🖩
  - 7309 0000 90
    
    Other 🖩
- 7310
  
  Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
  - 7310 1000
    
    Of a capacity of 50 liters or more
    
    7310 1000 05
    
    Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter. 🖩
    
    7310 1000 15
    
    Empty steel drums and barrels 🖩
    
    7310 1000 90
    
    Other 🖩
  - Of a capacity of less than 50 liters:
    
    7310 2100
    
    Cans which are to be closed by soldering or crimping
    
    7310 2100 25
    
    Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods 🖩
    
    7310 2100 70
    
    Containers of a circular cross section, of a capacity not exceeding 11.4 liters, of a kind used for aerosols 🖩
    
    7310 2100 75
    
    Other 🖩
    
    7310 2900
    
    Other
    
    Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods:
    
    7310 2900 20
    
    Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter 🖩
    
    7310 2900 30
    
    Other 🖩
    
    Other:
    
    7310 2900 55
    
    Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter 🖩
    
    7310 2900 65
    
    Other 🖩
- 7311 0000
  
  Containers for compressed or liquefied gas, of iron or steel
  - Certified prior to exportation to have been made in accordance with the safety requirements of sections 178.36 through 178.68 of title 49 CFR or under a specific exemption to those requirements:
    
    7311 0000 30
    
    Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number 🖩
    
    7311 0000 60
    
    Other 🖩
  - 7311 0000 90
    
    Other 🖩
- 7312
  
  Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:
  - 7312 10
    
    Stranded wire, ropes and cables:
    
    Stranded wire:
    
    Of stainless steel:
    
    7312 1005 00
    
    Fitted with fittings or made up into articles 🖩
    
    7312 1010
    
    Other
    
    7312 1010 30
    
    Tire cord 🖩
    
    7312 1010 50
    
    Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 🖩
    
    7312 1010 70
    
    Other 🖩
    
    Other:
    
    7312 1020 00
    
    Fitted with fittings or made up into articles 🖩
    
    7312 1030
    
    Other
    
    7312 1030 05
    
    Tire cord 🖩
    
    For prestressing concrete:
    
    7312 1030 10
    
    Covered with textile or other non- metallic material 🖩
    
    7312 1030 12
    
    Other 🖩
    
    7312 1030 20
    
    Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 🖩
    
    Other:
    
    7312 1030 45
    
    Of brass plated wire 🖩
    
    Other:
    
    Galvanized:
    
    7312 1030 65
    
    ACSR core strand 🖩
    
    Other:
    
    7312 1030 70
    
    Covered with textile or other nonmetallic material 🖩
    
    7312 1030 74
    
    Other 🖩
    
    7312 1030 80
    
    Other 🖩
    
    Ropes, cables and cordage other than stranded wire:
    
    Of stainless steel:
    
    7312 1050 00
    
    Fitted with fittings or made up into articles 🖩
    
    7312 1060
    
    Other
    
    7312 1060 30
    
    With a diameter not exceeding 9.5 mm 🖩
    
    7312 1060 60
    
    Other 🖩
    
    Other:
    
    7312 1070 00
    
    Fitted with fittings or made up into articles 🖩
    
    Other:
    
    7312 1080 00
    
    Of brass plated wire 🖩
    
    7312 1090
    
    Other
    
    Galvanized:
    
    7312 1090 30
    
    With a diameter not exceeding 9.5 mm 🖩
    
    7312 1090 60
    
    With a diameter exceeding 9.5 mm 🖩
    
    7312 1090 90
    
    Other 🖩
  - 7312 9000 00
    
    Other 🖩
- 7313 0000 00
  
  Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel 🖩
- 7314
  
  Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:
  - Woven cloth:
    
    7314 12
    
    Endless bands for machinery, of stainless steel:
    
    7314 1210 00
    
    With meshes not finer than 12 wires to the lineal centimeter in warp or filling 🖩
    
    7314 1220 00
    
    With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling 🖩
    
    With meshes finer than 36 wires to the lineal centimeter in warp or filling:
    
    Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines:
    
    7314 1230 00
    
    With 94 or more wires to the lineal centimeter 🖩
    
    7314 1260 00
    
    Other 🖩
    
    7314 1290 00
    
    Other 🖩
    
    7314 14
    
    Other woven cloth, of stainless steel:
    
    7314 1410 00
    
    With meshes not finer than 12 wires to the lineal centimeter in warp or filling 🖩
    
    7314 1420 00
    
    With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling 🖩
    
    With meshes finer than 36 wires to the lineal centimeter in warp or maximum:
    
    Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines:
    
    7314 1430 00
    
    With 94 or more wires to the lineal centimeter 🖩
    
    7314 1460 00
    
    Other 🖩
    
    7314 1490 00
    
    Other 🖩
    
    7314 1901 00
    
    Other 🖩
  - 7314 2000 00
    
    Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more 🖩
  - Other grill, netting and fencing, welded at the intersection:
    
    7314 31
    
    Plated or coated with zinc:
    
    7314 3110 00
    
    Wire fencing plated or coated with zinc, whether or not covered with plastic material 🖩
    
    7314 3150
    
    Other:
    
    7314 3150 10
    
    Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire 🖩
    
    7314 3150 80
    
    Other 🖩
    
    7314 3900 00
    
    Other 🖩
  - Other grill, netting and fencing:
    
    7314 4100
    
    Plated or coated with zinc
    
    7314 4100 30
    
    Chain link fencing 🖩
    
    Woven wire stucco netting, furred, not reinforced with supplemental horizontal wire:
    
    7314 4100 40
    
    Of wire with maximum cross- sectional dimension of 1 mm 🖩
    
    7314 4100 45
    
    Other 🖩
    
    7314 4100 80
    
    Other 🖩
    
    7314 4200
    
    Coated with plastics
    
    7314 4200 30
    
    Chain link fencing 🖩
    
    7314 4200 60
    
    Other 🖩
    
    7314 49
    
    Other:
    
    7314 4930 00
    
    Not cut to shape 🖩
    
    7314 4960 00
    
    Cut to shape 🖩
  - 7314 5000 00
    
    Expanded metal 🖩
- 7315
  
  Chain and parts thereof, of iron or steel:
  - Articulated link chain and parts thereof:
    
    7315 1100
    
    Roller chain
    
    7315 1100 05
    
    For motor vehicles 🖩
    
    Other:
    
    Of not over 50 mm pitch and containing more than 3 parts per pitch:
    
    7315 1100 10
    
    Bicycle chains 🖩
    
    7315 1100 45
    
    Other 🖩
    
    7315 1100 60
    
    Other 🖩
    
    7315 1200
    
    Other chain
    
    7315 1200 20
    
    Of not over 50 mm pitch and containing more than 3 parts per pitch 🖩
    
    Other:
    
    7315 1200 40
    
    Welded steel chain 🖩
    
    7315 1200 60
    
    Cast and combination chain 🖩
    
    7315 1200 80
    
    Other 🖩
    
    7315 1900 00
    
    Parts 🖩
  - 7315 20
    
    Skid chain:
    
    7315 2010 00
    
    Not over 8 mm in diameter 🖩
    
    7315 2050 00
    
    Over 8 mm in diameter 🖩
  - Other chain:
    
    7315 8100 00
    
    Stud link 🖩
    
    7315 82
    
    Other, welded link:
    
    Of alloy steel:
    
    7315 8210 00
    
    Not over 10 mm in diameter 🖩
    
    7315 8230 00
    
    Over 10 mm in diameter 🖩
    
    Of iron or nonalloy steel:
    
    7315 8250 00
    
    Not over 10 mm in diameter 🖩
    
    7315 8270 00
    
    Over 10 mm in diameter 🖩
    
    7315 89
    
    Other:
    
    With links of essentially round cross sections:
    
    7315 8910 00
    
    Not over 8 mm in diameter 🖩
    
    7315 8930 00
    
    Over 8 mm in diameter 🖩
    
    7315 8950 00
    
    Other 🖩
  - 7315 9000 00
    
    Other parts 🖩
- 7316 0000 00
  
  Anchors, grapnels and parts thereof, of iron or steel 🖩
- 7317 00
  
  Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:
  - 7317 0010 00
    
    Thumb tacks 🖩
  - Other, suitable for use in powder-actuated handtools:
    
    7317 0020 00
    
    Not threaded 🖩
    
    7317 0030 00
    
    Threaded 🖩
  - Other:
    
    Of one piece construction:
    
    7317 0055
    
    Made of round wire
    
    Collated nails:
    
    7317 0055 01
    
    Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized 🖩
    
    Other:
    
    Assembled in a wire coil:
    
    7317 0055 02
    
    Galvanized 🖩
    
    7317 0055 03
    
    Other 🖩
    
    Assembled in a plastic strip:
    
    7317 0055 05
    
    Galvanized 🖩
    
    7317 0055 07
    
    Other 🖩
    
    7317 0055 08
    
    Assembled in a paper strip 🖩
    
    7317 0055 11
    
    Assembled in a wire strip 🖩
    
    7317 0055 18
    
    Other 🖩
    
    Other:
    
    7317 0055 19
    
    With a length of less than 25.4 mm and with a diameter of less than 1.65 mm 🖩
    
    Other:
    
    Smooth shank:
    
    7317 0055 20
    
    Not coated, plated or painted 🖩
    
    Coated, plated or painted:
    
    7317 0055 30
    
    Galvanized 🖩
    
    7317 0055 40
    
    Vinyl, resin or cement coated 🖩
    
    7317 0055 50
    
    Other 🖩
    
    Other:
    
    7317 0055 60
    
    Not coated, plated or painted 🖩
    
    Coated, plated or painted:
    
    7317 0055 70
    
    Galvanized 🖩
    
    7317 0055 80
    
    Vinyl, resin or cement coated 🖩
    
    7317 0055 90
    
    Other 🖩
    
    7317 0065
    
    Other
    
    7317 0065 30
    
    Cut 🖩
    
    7317 0065 60
    
    Other 🖩
    
    7317 0075 00
    
    Of two or more pieces 🖩
- 7318
  
  Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:
  - Threaded articles:
    
    7318 1100 00
    
    Coach screws 🖩
    
    7318 1200 00
    
    Other wood screws 🖩
    
    7318 1300
    
    Screw hooks and screw rings
    
    7318 1300 30
    
    Having shanks or threads with a diameter of less than 6 mm 🖩
    
    7318 1300 60
    
    Having shanks or threads with a diameter of 6 mm or more 🖩
    
    7318 14
    
    Self-tapping screws:
    
    7318 1410
    
    Having shanks or threads with a diameter of less than 6 mm
    
    7318 1410 30
    
    Of stainless steel 🖩
    
    7318 1410 60
    
    Other 🖩
    
    7318 1450
    
    Having shanks or threads with a diameter of 6 mm or more
    
    7318 1450 20
    
    Of stainless steel 🖩
    
    7318 1450 80
    
    Other 🖩
    
    7318 15
    
    Other screws and bolts, whether or not with their nuts or washers:
    
    7318 1520
    
    Bolts and bolts and their nuts or washers entered or exported in the same shipment
    
    7318 1520 10
    
    Having shanks or threads with a diameter of less than 6 mm 🖩
    
    Having shanks or threads with a diameter of 6 mm or more:
    
    7318 1520 20
    
    Track bolts 🖩
    
    7318 1520 30
    
    Structural bolts 🖩
    
    Bent bolts:
    
    7318 1520 41
    
    Right-angle anchor bolts 🖩
    
    7318 1520 46
    
    Other 🖩
    
    Other:
    
    With round heads:
    
    7318 1520 51
    
    Of stainless steel 🖩
    
    7318 1520 55
    
    Other 🖩
    
    With hexagonal heads:
    
    7318 1520 61
    
    Of stainless steel 🖩
    
    7318 1520 65
    
    Other 🖩
    
    Other:
    
    7318 1520 91
    
    Of stainless steel 🖩
    
    7318 1520 95
    
    Other 🖩
    
    7318 1540 00
    
    Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws) 🖩
    
    7318 1550
    
    Studs
    
    7318 1550 30
    
    Of stainless steel 🖩
    
    Other:
    
    Continuously threaded rod:
    
    7318 1550 51
    
    Of alloy steel 🖩
    
    7318 1550 56
    
    Other 🖩
    
    7318 1550 90
    
    Other 🖩
    
    Other:
    
    7318 1560
    
    Having shanks or threads with a diameter of less than 6 mm
    
    Socket screws:
    
    7318 1560 10
    
    Of stainless steel 🖩
    
    7318 1560 40
    
    Other 🖩
    
    Other:
    
    7318 1560 70
    
    Of stainless steel 🖩
    
    7318 1560 80
    
    Other 🖩
    
    7318 1580
    
    Having shanks or threads with a diameter of 6 mm or more
    
    7318 1580 20
    
    Set screws 🖩
    
    Other:
    
    Socket screws:
    
    7318 1580 30
    
    Of stainless steel 🖩
    
    7318 1580 45
    
    Other 🖩
    
    Other:
    
    With hexagonal heads:
    
    7318 1580 55
    
    Of stainless steel 🖩
    
    Other:
    
    7318 1580 66
    
    Cap screws 🖩
    
    7318 1580 69
    
    Other 🖩
    
    Other:
    
    7318 1580 82
    
    Of stainless steel 🖩
    
    7318 1580 85
    
    Other 🖩
    
    7318 1600
    
    Nuts
    
    Lugnuts:
    
    7318 1600 15
    
    Non-locking chrome-plated 🖩
    
    7318 1600 30
    
    Locking 🖩
    
    7318 1600 45
    
    Other 🖩
    
    Other:
    
    7318 1600 60
    
    Of stainless steel 🖩
    
    7318 1600 85
    
    Other 🖩
    
    7318 1900 00
    
    Other 🖩
  - Non-threaded articles:
    
    7318 2100
    
    Spring washers and other lock washers
    
    7318 2100 30
    
    Helical spring lock washers 🖩
    
    7318 2100 90
    
    Other 🖩
    
    7318 2200 00
    
    Other washers 🖩
    
    7318 2300 00
    
    Rivets 🖩
    
    7318 2400 00
    
    Cotters and cotter pins 🖩
    
    7318 2900 00
    
    Other 🖩
- 7319
  
  Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:
  - 7319 40
    
    Safety pins and other pins:
    
    7319 4020
    
    Safety pins
    
    7319 4020 10
    
    On cards 🖩
    
    7319 4020 50
    
    Other 🖩
    
    7319 4030 00
    
    Dressmakers' or common pins 🖩
    
    7319 4050
    
    Other
    
    7319 4050 10
    
    Push pins 🖩
    
    7319 4050 50
    
    Other 🖩
  - 7319 90
    
    Other:
    
    7319 9010 00
    
    Sewing, darning or embroidery needles 🖩
    
    7319 9090 00
    
    Other 🖩
- 7320
  
  Springs and leaves for springs, of iron or steel:
  - 7320 10
    
    Leaf springs and leaves therefor:
    
    Suitable for motor vehicle suspension:
    
    7320 1030 00
    
    To be used in motor vehicles having a G.V.W. not exceeding 4 metric tons 🖩
    
    7320 1060
    
    Other
    
    7320 1060 15
    
    Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor 🖩
    
    7320 1060 60
    
    Other 🖩
    
    7320 1090
    
    Other
    
    7320 1090 15
    
    Leaf springs having individual leaves with a thickness of 1.6 mm or more and leaves therefor 🖩
    
    7320 1090 60
    
    Other 🖩
  - 7320 20
    
    Helical springs:
    
    7320 2010 00
    
    Suitable for motor-vehicle suspension 🖩
    
    7320 2050
    
    Other
    
    Helical springs, of wire having a cross-sectional dimension of less than 5.1 mm:
    
    7320 2050 10
    
    Suitable for use in mattress supports and mattresses of heading 9404 🖩
    
    7320 2050 20
    
    Other 🖩
    
    7320 2050 45
    
    Helical springs, of wire having a cross-sectional dimension of 5.1 mm or more but less than 12.7 mm 🖩
    
    7320 2050 60
    
    Other 🖩
  - 7320 90
    
    Other:
    
    7320 9010 00
    
    Hairsprings 🖩
    
    7320 9050
    
    Other
    
    Of wire:
    
    7320 9050 10
    
    Suitable for use in mattress supports and mattresses of heading 9404 🖩
    
    7320 9050 20
    
    Other 🖩
    
    7320 9050 60
    
    Other 🖩
- 7321
  
  Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar nonelectric domestic appliances, and parts thereof, of iron or steel:
  - Cooking appliances and plate warmers:
    
    7321 11
    
    For gas fuel or for both gas and other fuels:
    
    7321 1110
    
    Portable
    
    7321 1110 30
    
    Stoves or ranges 🖩
    
    7321 1110 60
    
    Other 🖩
    
    Other:
    
    7321 1130
    
    Stoves or ranges:
    
    7321 1130 10
    
    Of a maximum width not exceeding 70 centimeters 🖩
    
    7321 1130 20
    
    Of a maximum width exceeding 70 but not exceeding 80 centimeters 🖩
    
    7321 1130 50
    
    Of a maximum width exceeding 80 centimeters 🖩
    
    7321 1160 00
    
    Other 🖩
    
    7321 1200 00
    
    For liquid fuel 🖩
    
    7321 1900
    
    Other, including appliances for solid fuel
    
    Portable:
    
    7321 1900 20
    
    Hibachis 🖩
    
    7321 1900 40
    
    Other 🖩
    
    Other:
    
    7321 1900 60
    
    Of cast iron 🖩
    
    7321 1900 80
    
    Other 🖩
  - Other appliances:
    
    7321 81
    
    For gas fuel or for both gas and other fuels:
    
    7321 8110 00
    
    Portable 🖩
    
    7321 8150 00
    
    Other 🖩
    
    7321 82
    
    For liquid fuel:
    
    7321 8210 00
    
    Portable 🖩
    
    7321 8250 00
    
    Other 🖩
    
    7321 8900
    
    Other, including appliances for solid fuel
    
    7321 8900 10
    
    Fireplace grates of cast iron 🖩
    
    7321 8900 50
    
    Other 🖩
  - 7321 90
    
    Parts:
    
    Of articles in subheading 7321.11.30:
    
    7321 9010 00
    
    Cooking chambers, whether or not assembled 🖩
    
    7321 9020 00
    
    Top surface panels with or without burners or controls 🖩
    
    7321 9040 00
    
    Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation 🖩
    
    7321 9050 00
    
    Other 🖩
    
    7321 9060
    
    Other
    
    Of cooking appliances and plate warmers:
    
    7321 9060 40
    
    Shelving and racks for cooking ovens 🖩
    
    7321 9060 60
    
    Other 🖩
    
    7321 9060 90
    
    Other 🖩
- 7322
  
  Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:
  - Radiators and parts thereof:
    
    7322 1100 00
    
    Of cast iron 🖩
    
    7322 1900 00
    
    Other 🖩
  - 7322 9000
    
    Other, including parts
    
    7322 9000 15
    
    Air heaters, not electrically heated, incorporating a motor-driven fan or blower 🖩
    
    7322 9000 30
    
    Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower 🖩
    
    7322 9000 45
    
    Parts of air heaters and hot air distributors 🖩
- 7323
  
  Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel:
  - 7323 1000 00
    
    Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like 🖩
  - Other:
    
    7323 91
    
    Of cast iron, not enameled:
    
    7323 9110 00
    
    Coated or plated with precious metal 🖩
    
    7323 9150
    
    Other
    
    7323 9150 20
    
    Bakeware (cookware not suitable for stove top use) 🖩
    
    7323 9150 40
    
    Other 🖩
    
    7323 9200
    
    Of cast iron, enameled
    
    7323 9200 20
    
    Bakeware (cookware not suitable for stove top use) 🖩
    
    7323 9200 40
    
    Other 🖩
    
    7323 9300
    
    Of stainless steel
    
    Cooking and kitchen ware:
    
    7323 9300 15
    
    Teakettles 🖩
    
    Other:
    
    Cooking ware:
    
    7323 9300 35
    
    Bakeware (cookware not suitable for stove top use) 🖩
    
    7323 9300 45
    
    Other 🖩
    
    7323 9300 60
    
    Kitchen ware 🖩
    
    7323 9300 80
    
    Other 🖩
    
    7323 9400
    
    Of iron (other than cast iron) or steel, enameled
    
    Cooking and kitchen ware:
    
    Of steel:
    
    7323 9400 10
    
    Teakettles 🖩
    
    Other:
    
    Cooking ware:
    
    7323 9400 21
    
    Bakeware (cookware not suitable for stove top use) 🖩
    
    7323 9400 26
    
    Other 🖩
    
    7323 9400 30
    
    Kitchen ware 🖩
    
    7323 9400 40
    
    Other 🖩
    
    7323 9400 80
    
    Other 🖩
    
    7323 99
    
    Other:
    
    Coated or plated with precious metal:
    
    7323 9910 00
    
    Coated or plated with silver 🖩
    
    7323 9930 00
    
    Other 🖩
    
    Not coated or plated with precious metal:
    
    7323 9950
    
    Of tinplate
    
    7323 9950 30
    
    Kitchen or tableware suitable for food or drink contact 🖩
    
    7323 9950 60
    
    Other 🖩
    
    Other:
    
    7323 9970 00
    
    Cookingware 🖩
    
    7323 9990
    
    Other
    
    7323 9990 30
    
    Kitchen or tableware suitable for food or drink contact 🖩
    
    7323 9990 40
    
    Gates for confining children or pets 🖩
    
    7323 9990 80
    
    Other 🖩
- 7324
  
  Sanitary ware and parts thereof, of iron or steel:
  - 7324 1000
    
    Sinks and wash basins, of stainless steel
    
    7324 1000 10
    
    Stainless steel sinks with one or more drawn bowls (basins) 🖩
    
    7324 1000 50
    
    Other 🖩
  - Baths:
    
    7324 21
    
    Of cast iron, whether or not enamelled:
    
    7324 2110 00
    
    Coated or plated with precious metal 🖩
    
    7324 2150 00
    
    Other 🖩
    
    7324 2900 00
    
    Other 🖩
  - 7324 9000 00
    
    Other, including parts 🖩
- 7325
  
  Other cast articles of iron or steel:
  - 7325 1000
    
    Of nonmalleable cast iron
    
    7325 1000 10
    
    Manhole covers, rings and frames 🖩
    
    7325 1000 20
    
    Catch basins, grates and frames 🖩
    
    7325 1000 25
    
    Cleanout covers and frames 🖩
    
    7325 1000 30
    
    Valve and service boxes 🖩
    
    7325 1000 35
    
    Meter boxes 🖩
    
    7325 1000 80
    
    Other 🖩
  - Other:
    
    7325 9100 00
    
    Grinding balls and similar articles for mills 🖩
    
    7325 99
    
    Other:
    
    7325 9910 00
    
    Of cast iron 🖩
    
    7325 9950 00
    
    Other 🖩
- 7326
  
  Other articles of iron or steel:
  - Forged or stamped, but not further worked:
    
    7326 1100 00
    
    Grinding balls and similar articles for mills 🖩
    
    7326 1900
    
    Other
    
    7326 1900 10
    
    Forged 🖩
    
    7326 1900 80
    
    Other 🖩
  - 7326 2000
    
    Articles of iron or steel wire
    
    7326 2000 10
    
    Belts and belting 🖩
    
    7326 2000 20
    
    Garment hangers 🖩
    
    7326 2000 30
    
    Sod staples, U staples, irrigation staples, ground staples, and ground pins 🖩
    
    7326 2000 40
    
    Double loop bar ties and double loop wire ties 🖩
    
    7326 2000 55
    
    Paint roller frames 🖩
    
    7326 2000 90
    
    Other 🖩
  - 7326 90
    
    Other:
    
    7326 9010 00
    
    Of tinplate 🖩
    
    Other:
    
    7326 9025 00
    
    Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length 🖩
    
    7326 9035 00
    
    Containers of a kind normally carried on the person, in the pocket or in the handbag 🖩
    
    7326 9045 00
    
    Horse and mule shoes 🖩
    
    Other:
    
    7326 9060 00
    
    Coated or plated with precious metal 🖩
    
    7326 9086
    
    Other
    
    7326 9086 05
    
    Rods for electrical grounding 🖩
    
    7326 9086 10
    
    Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material 🖩
    
    7326 9086 30
    
    Hangers and similar supports for tubes and pipes 🖩
    
    7326 9086 35
    
    Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates 🖩
    
    7326 9086 45
    
    Barbed tape 🖩
    
    7326 9086 60
    
    Ladders 🖩
    
    7326 9086 75
    
    Paint roller frames (other than of iron or steel wire) 🖩
    
    7326 9086 76
    
    Metal handles for brooms, mops, paint applicators and similar products 🖩
    
    7326 9086 77
    
    Burial caskets 🖩
    
    7326 9086 88
    
    Other 🖩
74

Copper and articles thereof
- 7401 0000 00
  
  Copper mattes; cement copper (precipitated copper) 🖩
- 7402 0000 00
  
  Unrefined copper; copper anodes for electrolytic refining 🖩
- 7403
  
  Refined copper and copper alloys, unwrought (other than master alloys of heading 7405):
  - Refined copper:
    
    7403 1100 00
    
    Cathodes and sections of cathodes 🖩
    
    7403 1200 00
    
    Wire bars 🖩
    
    7403 1300 00
    
    Billets 🖩
    
    7403 1900 00
    
    Other 🖩
  - Copper alloys:
    
    7403 2100 00
    
    Copper-zinc base alloys (brass) 🖩
    
    7403 2200 00
    
    Copper-tin base alloys (bronze) 🖩
    
    7403 2901
    
    Other copper alloys
    
    7403 2901 10
    
    Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 🖩
    
    7403 2901 80
    
    Other 🖩
- 7404 00
  
  Copper waste and scrap:
  - 7404 0030
    
    Spent anodes; waste and scrap with a copper content of less than 94 percent by weight
    
    7404 0030 20
    
    Of refined copper 🖩
    
    Of copper alloys:
    
    Of copper-zinc base alloys (brass):
    
    7404 0030 45
    
    Containing more than 0.3 percent of lead 🖩
    
    7404 0030 55
    
    Other 🖩
    
    7404 0030 65
    
    Of copper-tin base alloys (bronze) 🖩
    
    7404 0030 90
    
    Other 🖩
  - 7404 0060
    
    Other
    
    7404 0060 20
    
    Of refined copper 🖩
    
    Of copper alloys:
    
    Of copper-zinc base alloys (brass):
    
    7404 0060 45
    
    Containing more than 0.3 percent of lead 🖩
    
    7404 0060 55
    
    Other 🖩
    
    7404 0060 65
    
    Of copper-tin base alloys (bronze) 🖩
    
    7404 0060 90
    
    Other 🖩
- 7405 00
  
  Master alloys of copper:
  - 7405 0010 00
    
    Containing by weight 5 percent or more but not more than 15 percent of phosphorus 🖩
  - 7405 0060
    
    Other
    
    7405 0060 30
    
    Beryllium copper master alloy 🖩
    
    7405 0060 50
    
    Other 🖩
- 7406
  
  Copper powders and flakes:
  - 7406 1000 00
    
    Powders of non-lamellar structure 🖩
  - 7406 2000 00
    
    Powders of lamellar structure; flakes 🖩
- 7407
  
  Copper bars, rods and profiles:
  - 7407 10
    
    Of refined copper:
    
    Profiles:
    
    7407 1015 00
    
    Hollow profiles 🖩
    
    7407 1030 00
    
    Other 🖩
    
    7407 1050
    
    Bars and rods
    
    7407 1050 10
    
    Having a rectangular cross section 🖩
    
    7407 1050 50
    
    Other 🖩
  - Of copper alloys:
    
    7407 21
    
    Of copper-zinc base alloys (brass):
    
    Profiles:
    
    7407 2115 00
    
    Hollow profiles 🖩
    
    7407 2130 00
    
    Other 🖩
    
    Bars and rods:
    
    7407 2150 00
    
    Low fuming brazing rods 🖩
    
    Other:
    
    7407 2170 00
    
    Having a rectangular cross section 🖩
    
    7407 2190 00
    
    Other 🖩
    
    7407 29
    
    Other:
    
    Profiles:
    
    7407 2916
    
    Hollow
    
    7407 2916 10
    
    Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 🖩
    
    7407 2916 80
    
    Other 🖩
    
    Other:
    
    7407 2934 00
    
    Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 🖩
    
    7407 2938 00
    
    Other 🖩
    
    7407 2940 00
    
    Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) 🖩
    
    7407 2950 00
    
    Other bars and rods 🖩
- 7408
  
  Copper wire:
  - Of refined copper:
    
    7408 11
    
    Of which the maximum cross-sectional dimension exceeds 6 mm:
    
    7408 1130 00
    
    With a maximum cross-sectional dimension over 9.5 mm 🖩
    
    7408 1160 00
    
    With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm 🖩
    
    7408 1900
    
    Other
    
    7408 1900 30
    
    With a maximum cross-sectional dimension of 3 mm or less 🖩
    
    7408 1900 60
    
    Other 🖩
  - Of copper alloys:
    
    7408 2100 00
    
    Of copper-zinc base alloys (brass) 🖩
    
    7408 22
    
    Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver):
    
    7408 2210 00
    
    Coated or plated with metal 🖩
    
    7408 2250 00
    
    Not coated or plated with metal 🖩
    
    7408 29
    
    Other:
    
    7408 2910 00
    
    Coated or plated with metal 🖩
    
    7408 2950 00
    
    Not coated or plated with metal 🖩
- 7409
  
  Copper plates, sheets and strip, of a thickness exceeding 0.15 mm:
  - Of refined copper:
    
    7409 11
    
    In coils:
    
    7409 1110 00
    
    Of a thickness of 5 mm or more 🖩
    
    7409 1150
    
    Of a thickness of less than 5 mm
    
    7409 1150 10
    
    Of a width of 500 mm or more 🖩
    
    7409 1150 50
    
    Of a width of less than 500 mm 🖩
    
    7409 19
    
    Other:
    
    7409 1910 00
    
    Of a thickness of 5 mm or more 🖩
    
    Of a thickness of less than 5 mm:
    
    7409 1950 00
    
    Of a width of 500 mm or more 🖩
    
    7409 1990 00
    
    Of a width of less than 500 mm 🖩
  - Of copper-zinc base alloys (brass):
    
    7409 2100
    
    In coils
    
    7409 2100 10
    
    Of a thickness of 5 mm or more 🖩
    
    Of a thickness of less than 5 mm:
    
    7409 2100 50
    
    Of a width of 500 mm or more 🖩
    
    Of a width of less than 500 mm:
    
    7409 2100 75
    
    Of a thickness less than 1.6 mm 🖩
    
    7409 2100 90
    
    Other 🖩
    
    7409 2900
    
    Other
    
    7409 2900 10
    
    Of a thickness of 5 mm or more 🖩
    
    Of a thickness of less than 5 mm:
    
    7409 2900 50
    
    Of a width of 500 mm or more 🖩
    
    Of a width of less than 500 mm:
    
    7409 2900 75
    
    Of a thickness less than 1.6 mm 🖩
    
    7409 2900 90
    
    Other 🖩
  - Of copper-tin base alloys (bronze):
    
    7409 31
    
    In coils:
    
    7409 3110 00
    
    Of a thickness of 5 mm or more 🖩
    
    Of a thickness of less than 5 mm:
    
    7409 3150 00
    
    Of a width of 500 mm or more 🖩
    
    7409 3190 00
    
    Of a width of less than 500 mm 🖩
    
    7409 39
    
    Other:
    
    7409 3910
    
    Of a thickness of 5 mm or more
    
    7409 3910 30
    
    Of phosphor bronze 🖩
    
    7409 3910 60
    
    Other 🖩
    
    Of a thickness of less than 5 mm:
    
    7409 3950 00
    
    Of a width of 500 mm or more 🖩
    
    7409 3990
    
    Of a width of less than 500 mm
    
    7409 3990 30
    
    Of phosphor bronze 🖩
    
    7409 3990 60
    
    Other 🖩
  - 7409 4000 00
    
    Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver) 🖩
  - 7409 90
    
    Of other copper alloys:
    
    7409 9010
    
    Of a thickness of 5 mm or more
    
    7409 9010 30
    
    Of beryllium copper 🖩
    
    7409 9010 60
    
    Other 🖩
    
    Of a thickness of less than 5 mm:
    
    7409 9050
    
    Of a width of 500 mm or more
    
    7409 9050 30
    
    Of beryllium copper 🖩
    
    7409 9050 60
    
    Other 🖩
    
    7409 9090
    
    Of a width of less than 500 mm
    
    7409 9090 30
    
    Of beryllium copper 🖩
    
    7409 9090 60
    
    Other 🖩
- 7410
  
  Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm:
  - Not backed:
    
    7410 1100 00
    
    Of refined copper 🖩
    
    7410 1200
    
    Of copper alloys
    
    7410 1200 30
    
    Of copper-zinc base alloys (brass) 🖩
    
    7410 1200 60
    
    Other 🖩
  - Backed:
    
    7410 21
    
    Of refined copper:
    
    7410 2130
    
    Copper clad laminates
    
    Having a base wholly of plastics impregnated glass:
    
    7410 2130 20
    
    Having copper on one side only 🖩
    
    7410 2130 40
    
    Having copper on both sides 🖩
    
    7410 2130 60
    
    Other 🖩
    
    7410 2160 00
    
    Other 🖩
    
    7410 2200 00
    
    Of copper alloys 🖩
- 7411
  
  Copper tubes and pipes:
  - 7411 10
    
    Of refined copper:
    
    7411 1010
    
    Seamless
    
    7411 1010 30
    
    Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spools 🖩
    
    7411 1010 90
    
    Other 🖩
    
    7411 1050 00
    
    Other 🖩
  - Of copper alloys:
    
    7411 21
    
    Of copper-zinc base alloys (brass):
    
    7411 2110 00
    
    Seamless 🖩
    
    7411 2150 00
    
    Other 🖩
    
    7411 2200 00
    
    Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver) 🖩
    
    7411 29
    
    Other:
    
    7411 2910 00
    
    Seamless 🖩
    
    7411 2950 00
    
    Other 🖩
- 7412
  
  Copper tube or pipe fittings (for example couplings, elbows, sleeves):
  - 7412 1000 00
    
    Of refined copper 🖩
  - 7412 2000
    
    Of copper alloys
    
    7412 2000 15
    
    For brake hoses for vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29 or headings 8702, 8703, 8704, or 8705 🖩
    
    Other:
    
    Of copper-zinc base alloys (brass):
    
    Threaded:
    
    7412 2000 25
    
    Nipples 🖩
    
    7412 2000 35
    
    Other 🖩
    
    7412 2000 45
    
    Other 🖩
    
    Other:
    
    Threaded:
    
    7412 2000 65
    
    Nipples 🖩
    
    7412 2000 85
    
    Other 🖩
    
    7412 2000 90
    
    Other 🖩
- 7413 00
  
  Stranded wire, cables, plaited bands and the like, including slings and similar articles, of copper, not electrically insulated:
  - Not fitted with fittings and not made up into articles:
    
    7413 0010 00
    
    Stranded wire 🖩
    
    7413 0050 00
    
    Other 🖩
  - 7413 0090 00
    
    Fitted with fittings or made up into articles 🖩
- 7415
  
  Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper:
  - 7415 1000 00
    
    Nails and tacks, drawing pins, staples and similar articles 🖩
  - Other articles, not threaded:
    
    7415 2100 00
    
    Washers (including spring washers) 🖩
    
    7415 2900 00
    
    Other 🖩
  - Other threaded articles:
    
    7415 33
    
    Screws, bolts and nuts:
    
    7415 3305 00
    
    Screws for wood 🖩
    
    7415 3310 00
    
    Muntz or yellow metal bolts 🖩
    
    7415 3380
    
    Other screws and bolts; nuts
    
    7415 3380 10
    
    Having shanks, threads or holes 6 mm or more in diameter 🖩
    
    7415 3380 50
    
    Having shanks, threads or holes less than 6 mm in diameter 🖩
    
    7415 3900 00
    
    Other 🖩
- 7418
  
  Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper:
  - 7418 1000
    
    Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
    
    Pot scourers and scouring or polishing pads, gloves and the like:
    
    7418 1000 02
    
    Of copper-zinc base alloys (brass) 🖩
    
    7418 1000 04
    
    Other 🖩
    
    Other:
    
    7418 1000 19
    
    Coated or plated with precious metals 🖩
    
    Other:
    
    Of copper-zinc base alloys (brass):
    
    7418 1000 21
    
    Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof 🖩
    
    7418 1000 23
    
    Cooking and kitchen ware 🖩
    
    7418 1000 25
    
    Other 🖩
    
    Other:
    
    7418 1000 51
    
    Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof 🖩
    
    7418 1000 53
    
    Cooking and kitchen ware 🖩
    
    7418 1000 55
    
    Other 🖩
  - 7418 20
    
    Sanitary ware and parts thereof:
    
    7418 2010 00
    
    Of copper-zinc base alloys (brass) 🖩
    
    7418 2050 00
    
    Other 🖩
- 7419
  
  Other articles of copper:
  - 7419 2000
    
    Cast, molded, stamped or forged, but not further worked
    
    7419 2000 10
    
    Brass plumbing goods, not elsewhere specified or included 🖩
    
    7419 2000 50
    
    Other 🖩
  - 7419 80
    
    Other:
    
    Cloth (including endless bands), grill and netting, of copper wire; expanded metal of copper:
    
    Cloth:
    
    7419 8003 00
    
    Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeter 🖩
    
    7419 8006
    
    Other
    
    7419 8006 60
    
    Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with fewer than 94 or more wires to the lineal centimeter 🖩
    
    7419 8006 80
    
    Other 🖩
    
    7419 8009 00
    
    Other 🖩
    
    7419 8015 00
    
    Containers of a kind normally carried on the person, in the pocket or in the handbag 🖩
    
    7419 8016 00
    
    Copper springs 🖩
    
    7419 8017 00
    
    Chain and parts thereof 🖩
    
    Other:
    
    7419 8030 00
    
    Coated or plated with precious metal 🖩
    
    7419 8050
    
    Other
    
    7419 8050 10
    
    Brass plumbing goods not elsewhere specified or included 🖩
    
    7419 8050 50
    
    Other 🖩
75

Nickel and articles thereof
- 7501
  
  Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy:
  - 7501 1000 00
    
    Nickel mattes 🖩
  - 7501 2000 00
    
    Nickel oxide sinters and other intermediate products of nickel metallurgy 🖩
- 7502
  
  Unwrought nickel:
  - 7502 1000 00
    
    Nickel, not alloyed 🖩
  - 7502 2000 00
    
    Nickel alloys 🖩
- 7503 0000 00
  
  Nickel waste and scrap 🖩
- 7504 0000
  
  Nickel powders and flakes
  - 7504 0000 10
    
    Powders 🖩
  - 7504 0000 50
    
    Flakes 🖩
- 7505
  
  Nickel bars, rods, profiles and wire:
  - Bars, rods and profiles:
    
    7505 11
    
    Of nickel, not alloyed:
    
    Bars and rods:
    
    7505 1110 00
    
    Cold-formed 🖩
    
    7505 1130 00
    
    Not cold-formed 🖩
    
    7505 1150 00
    
    Profiles 🖩
    
    7505 12
    
    Of nickel alloys:
    
    Bars and rods:
    
    7505 1210 00
    
    Cold-formed 🖩
    
    7505 1230 00
    
    Not cold-formed 🖩
    
    7505 1250 00
    
    Profiles 🖩
  - Wire:
    
    7505 21
    
    Of nickel, not alloyed:
    
    7505 2110 00
    
    Cold-formed 🖩
    
    7505 2150 00
    
    Not cold-formed 🖩
    
    7505 22
    
    Of nickel alloys:
    
    7505 2210 00
    
    Cold-formed 🖩
    
    7505 2250 00
    
    Not cold-formed 🖩
- 7506
  
  Nickel plates, sheets, strip and foil:
  - 7506 10
    
    Of nickel, not alloyed:
    
    7506 1005 00
    
    Not exceeding 0.15 mm in thickness 🖩
    
    Other:
    
    7506 1010 00
    
    Cold-formed 🖩
    
    7506 1030 00
    
    Not cold-formed 🖩
  - 7506 20
    
    Of nickel alloys:
    
    7506 2005 00
    
    Not exceeding 0.15 mm in thickness 🖩
    
    Other:
    
    7506 2010 00
    
    Cold-formed 🖩
    
    7506 2030 00
    
    Not cold-formed 🖩
- 7507
  
  Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves):
  - Tubes and pipes:
    
    7507 1100 00
    
    Of nickel, not alloyed 🖩
    
    7507 1200 00
    
    Of nickel alloys 🖩
  - 7507 2000 00
    
    Tube or pipe fittings 🖩
- 7508
  
  Other articles of nickel:
  - 7508 1000 00
    
    Cloth, grill and netting, of nickel wire 🖩
  - 7508 90
    
    Other:
    
    7508 9010 00
    
    Stranded wire 🖩
    
    7508 9050 00
    
    Other 🖩
76

Aluminum and articles thereof
- 7601
  
  Unwrought aluminum:
  - 7601 10
    
    Aluminum, not alloyed:
    
    7601 1030 00
    
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils 🖩
    
    7601 1060
    
    Other
    
    7601 1060 40
    
    Of 99.9 percent aluminum or greater 🖩
    
    7601 1060 45
    
    Of greater than 99.8 percent but less than 99.9 percent 🖩
    
    7601 1060 90
    
    Other 🖩
  - 7601 20
    
    Aluminum alloys:
    
    7601 2030 00
    
    Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils 🖩
    
    Other:
    
    7601 2060 00
    
    Containing 25 percent or more by weight of silicon 🖩
    
    7601 2090
    
    Other
    
    7601 2090 30
    
    Aluminum vanadium master alloy 🖩
    
    Other:
    
    7601 2090 45
    
    Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils 🖩
    
    7601 2090 60
    
    Other, containing 0.03 percent or more by weight of lead (secondary aluminum) 🖩
    
    Other:
    
    7601 2090 75
    
    Remelt scrap ingot 🖩
    
    7601 2090 80
    
    Sheet ingot (slab) of a kind described in statistical note 3 to this chapter 🖩
    
    7601 2090 85
    
    Foundry ingot of a kind described in statistical note 4 to this chapter 🖩
    
    7601 2090 95
    
    Other 🖩
- 7602 0000
  
  Aluminum waste and scrap
  - 7602 0000 35
    
    Recyclable used beverage containers 🖩
  - 7602 0000 95
    
    Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips 🖩
  - 7602 0000 97
    
    Other recyclable aluminum 🖩
  - 7602 0000 98
    
    Other 🖩
- 7603
  
  Aluminum powders and flakes:
  - 7603 1000 00
    
    Powders of non-lamellar structure 🖩
  - 7603 2000 00
    
    Powders of lamellar structure; flakes 🖩
- 7604
  
  Aluminum bars, rods and profiles:
  - 7604 10
    
    Of aluminum, not alloyed:
    
    7604 1010 00
    
    Profiles 🖩
    
    Bars and rods:
    
    7604 1030 00
    
    Having a round cross section 🖩
    
    7604 1050 00
    
    Other 🖩
  - Of aluminum alloys:
    
    7604 2100
    
    Hollow profiles
    
    7604 2100 10
    
    Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter 🖩
    
    7604 2100 90
    
    Other 🖩
    
    7604 29
    
    Other:
    
    7604 2910
    
    Other profiles
    
    7604 2910 10
    
    Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter 🖩
    
    7604 2910 90
    
    Other 🖩
    
    Bars and rods:
    
    7604 2930
    
    Having a round cross section
    
    7604 2930 30
    
    High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter 🖩
    
    7604 2930 60
    
    Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter 🖩
    
    7604 2930 90
    
    Other 🖩
    
    7604 2950
    
    Other
    
    7604 2950 20
    
    High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter 🖩
    
    7604 2950 50
    
    Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter 🖩
    
    7604 2950 90
    
    Other 🖩
- 7605
  
  Aluminum wire:
  - Of aluminum, not alloyed:
    
    7605 1100 00
    
    Of which the maximum cross-sectional dimension exceeds 7 mm 🖩
    
    7605 1900 00
    
    Other 🖩
  - Of aluminum alloys:
    
    7605 2100 00
    
    Of which the maximum cross-sectional dimension exceeds 7 mm 🖩
    
    7605 2900 00
    
    Other 🖩
- 7606
  
  Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm:
  - Rectangular (including square):
    
    7606 11
    
    Of aluminum, not alloyed:
    
    7606 1130
    
    Not clad
    
    7606 1130 30
    
    With a thickness of more than 6.3 mm 🖩
    
    7606 1130 60
    
    With a thickness of 6.3 mm or less 🖩
    
    7606 1160 00
    
    Clad 🖩
    
    7606 12
    
    Of aluminum alloys:
    
    7606 1230
    
    Not clad
    
    With a thickness of more than 6.3 mm:
    
    7606 1230 15
    
    High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter 🖩
    
    7606 1230 25
    
    Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter 🖩
    
    7606 1230 35
    
    Other 🖩
    
    With a thickness of 6.3 mm or less:
    
    Aluminum can stock:
    
    7606 1230 45
    
    Body stock 🖩
    
    7606 1230 55
    
    Lid stock 🖩
    
    Other:
    
    7606 1230 91
    
    Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter 🖩
    
    7606 1230 96
    
    Other 🖩
    
    7606 1260 00
    
    Clad 🖩
  - Other:
    
    7606 91
    
    Of aluminum, not alloyed:
    
    7606 9130
    
    Not clad
    
    7606 9130 55
    
    With a thickness of more than 6.3 mm 🖩
    
    7606 9130 95
    
    With a thickness of 6.3 mm or less 🖩
    
    7606 9160
    
    Clad
    
    7606 9160 55
    
    With a thickness of more than 6.3 mm 🖩
    
    7606 9160 95
    
    With a thickness of 6.3 mm or less 🖩
    
    7606 92
    
    Of aluminum alloys:
    
    7606 9230
    
    Not clad
    
    7606 9230 25
    
    With a thickness of more than 6.3 mm 🖩
    
    7606 9230 35
    
    With a thickness of 6.3 mm or less 🖩
    
    7606 9260
    
    Clad
    
    7606 9260 55
    
    With a thickness of more than 6.3 mm 🖩
    
    7606 9260 95
    
    With a thickness of 6.3 mm or less 🖩
- 7607
  
  Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm:
  - Not backed:
    
    7607 11
    
    Rolled but not further worked:
    
    Of a thickness not exceeding 0.15 mm:
    
    7607 1130 00
    
    Of a thickness not exceeding 0.01 mm 🖩
    
    7607 1160
    
    Of a thickness exceeding 0.01 mm
    
    7607 1160 10
    
    Boxed aluminum foil weighing not more than 11.3 kg 🖩
    
    7607 1160 90
    
    Other 🖩
    
    7607 1190
    
    Other
    
    Aluminum can stock:
    
    7607 1190 30
    
    Body stock 🖩
    
    7607 1190 60
    
    Lid stock 🖩
    
    7607 1190 90
    
    Other 🖩
    
    7607 19
    
    Other:
    
    7607 1910 00
    
    Etched capacitor foil 🖩
    
    Other:
    
    7607 1930 00
    
    Cut to shape, of a thickness not exceeding 0.15 mm 🖩
    
    7607 1960 00
    
    Other 🖩
  - 7607 20
    
    Backed:
    
    7607 2010 00
    
    Covered or decorated with a character, design, fancy effect or pattern 🖩
    
    7607 2050 00
    
    Other 🖩
- 7608
  
  Aluminum tubes and pipes:
  - 7608 1000
    
    Of aluminum, not alloyed
    
    7608 1000 30
    
    Seamless 🖩
    
    7608 1000 90
    
    Other 🖩
  - 7608 2000
    
    Of aluminum alloys
    
    7608 2000 30
    
    Seamless 🖩
    
    7608 2000 90
    
    Other 🖩
- 7609 0000 00
  
  Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves) 🖩
- 7610
  
  Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures:
  - 7610 1000
    
    Doors, windows and their frames and thresholds for doors
    
    7610 1000 10
    
    Windows and their frames 🖩
    
    7610 1000 20
    
    Thresholds for doors 🖩
    
    7610 1000 30
    
    Other 🖩
  - 7610 9000
    
    Other
    
    7610 9000 20
    
    Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment 🖩
    
    7610 9000 40
    
    Architectural and ornamental work 🖩
    
    Other:
    
    7610 9000 60
    
    Mobile homes 🖩
    
    7610 9000 80
    
    Other 🖩
- 7611 0000
  
  Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
  - 7611 0000 30
    
    Tanks 🖩
  - 7611 0000 90
    
    Other 🖩
- 7612
  
  Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment:
  - 7612 1000 00
    
    Collapsible tubular containers 🖩
  - 7612 90
    
    Other:
    
    7612 9010
    
    Of a capacity not exceeding 20 liters
    
    Cans of a capacity not exceeding 355 ml:
    
    7612 9010 40
    
    With a circular cross section, of a kind used for aerosols 🖩
    
    7612 9010 45
    
    Other 🖩
    
    7612 9010 60
    
    Cans of a capacity exceeding 355 ml but less than 3.8 liters 🖩
    
    7612 9010 90
    
    Other 🖩
    
    7612 9050 00
    
    Other 🖩
- 7613 0000 00
  
  Aluminum containers for compressed or liquefied gas 🖩
- 7614
  
  Stranded wire, cables, plaited bands and the like, including slings and similar articles, of aluminum, not electrically insulated:
  - 7614 10
    
    With steel core:
    
    7614 1010 00
    
    Not fitted with fittings and not made up into articles 🖩
    
    7614 1050 00
    
    Fitted with fittings or made up into articles 🖩
  - 7614 90
    
    Other:
    
    Not fitted with fittings and not made up into articles:
    
    7614 9020
    
    Electrical conductors
    
    7614 9020 30
    
    With a cross-sectional area less than 240 mm² 🖩
    
    7614 9020 60
    
    With a cross-sectional area greater than or equal to 240 mm² 🖩
    
    7614 9040 00
    
    Other 🖩
    
    7614 9050 00
    
    Fitted with fittings or made up into articles 🖩
- 7615
  
  Table, kitchen or other household articles and parts thereof, of aluminum; pot scourers and scouring or polishing pads, gloves and the like, of aluminum; sanitary ware and parts thereof, of aluminum:
  - 7615 10
    
    Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like:
    
    7615 1011 00
    
    Pot scourers and scouring or polishing pads, gloves and the like 🖩
    
    Other:
    
    Cooking and kitchen ware:
    
    Enameled or glazed or containing nonstick interior finishes:
    
    7615 1020
    
    Cast
    
    7615 1020 15
    
    Bakeware (cookware not suitable for stove top use) 🖩
    
    7615 1020 25
    
    Other 🖩
    
    7615 1030
    
    Other
    
    7615 1030 15
    
    Bakeware (cookware not suitable for stove top use) 🖩
    
    7615 1030 25
    
    Other 🖩
    
    Not enameled or glazed and not containing nonstick interior finishes:
    
    7615 1050
    
    Cast
    
    7615 1050 20
    
    Bakeware (cookware not suitable for stove top use) 🖩
    
    7615 1050 40
    
    Other 🖩
    
    7615 1071
    
    Other
    
    7615 1071 25
    
    Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness 🖩
    
    Other cookware:
    
    7615 1071 30
    
    Bakeware (cookware not suitable for stove top use) 🖩
    
    7615 1071 55
    
    Other 🖩
    
    7615 1071 80
    
    Other 🖩
    
    7615 1091 00
    
    Other 🖩
  - 7615 2000 00
    
    Sanitary ware and parts thereof 🖩
- 7616
  
  Other articles of aluminum:
  - 7616 10
    
    Nails, tacks, staples (other than those of heading 8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles:
    
    7616 1010 00
    
    Nails, tacks and staples 🖩
    
    7616 1030 00
    
    Rivets 🖩
    
    7616 1050 00
    
    Cotters and cotter pins 🖩
    
    Other:
    
    7616 1070
    
    Having shanks, threads or holes over 6 mm in diameter
    
    7616 1070 30
    
    Threaded fasteners 🖩
    
    7616 1070 90
    
    Other 🖩
    
    7616 1090
    
    Other
    
    7616 1090 30
    
    Threaded fasteners 🖩
    
    7616 1090 90
    
    Other 🖩
  - Other:
    
    7616 9100 00
    
    Cloth, grill, netting and fencing, of aluminum wire 🖩
    
    7616 99
    
    Other:
    
    7616 9910 00
    
    Luggage frames 🖩
    
    7616 9951
    
    Other
    
    7616 9951 20
    
    Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material 🖩
    
    7616 9951 30
    
    Ladders 🖩
    
    7616 9951 40
    
    Venetian blinds and parts thereof 🖩
    
    7616 9951 50
    
    Hangers and supports for pipes and tubes 🖩
    
    Other:
    
    7616 9951 60
    
    Castings 🖩
    
    7616 9951 70
    
    Forgings 🖩
    
    Other:
    
    7616 9951 75
    
    Articles of wire 🖩
    
    7616 9951 90
    
    Other 🖩
77

(Reserved for possible future use)
78

Lead and articles thereof
- 7801
  
  Unwrought lead:
  - 7801 1000 00
    
    Refined lead 🖩
  - Other:
    
    7801 9100 00
    
    Containing by weight antimony as the principal other element 🖩
    
    7801 99
    
    Other:
    
    7801 9930 00
    
    Lead bullion 🖩
    
    7801 9990
    
    Other
    
    7801 9990 30
    
    Alloys of lead 🖩
    
    7801 9990 50
    
    Other 🖩
- 7802 0000
  
  Lead waste and scrap
  - 7802 0000 30
    
    Obtained from lead-acid storage batteries 🖩
  - 7802 0000 60
    
    Other 🖩
- 7804
  
  Lead plates, sheets, strip and foil; lead powders and flakes:
  - Plates, sheets, strip and foil:
    
    7804 1100 00
    
    Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0.2 mm 🖩
    
    7804 1900 00
    
    Other 🖩
  - 7804 2000 00
    
    Powders and flakes 🖩
- 7806
  
  Other articles of lead:
  - 7806 0003 00
    
    Lead bars, rods, profiles and wire 🖩
  - 7806 0005 00
    
    Lead tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) 🖩
  - 7806 0080 00
    
    Other 🖩
79

Zinc and articles thereof
- 7901
  
  Unwrought zinc:
  - Zinc, not alloyed:
    
    7901 1100 00
    
    Containing by weight 99.99 percent or more of zinc 🖩
    
    7901 12
    
    Containing by weight less than 99.99 percent of zinc:
    
    7901 1210 00
    
    Casting-grade zinc 🖩
    
    7901 1250 00
    
    Other 🖩
  - 7901 2000 00
    
    Zinc alloys 🖩
- 7902 0000 00
  
  Zinc waste and scrap 🖩
- 7903
  
  Zinc dust, powders and flakes:
  - 7903 1000 00
    
    Zinc dust 🖩
  - 7903 90
    
    Other:
    
    7903 9030 00
    
    Powders 🖩
    
    7903 9060 00
    
    Other 🖩
- 7904 0000 00
  
  Zinc bars, rods, profiles and wire 🖩
- 7905 0000 00
  
  Zinc plates, sheets, strip and foil 🖩
- 7907 00
  
  Other articles of zinc:
  - 7907 0010 00
    
    Articles of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing and parts thereof of zinc 🖩
  - 7907 0020 00
    
    Zinc tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) 🖩
  - 7907 0060 00
    
    Other 🖩
80

Tin and articles thereof
- 8001
  
  Unwrought tin:
  - 8001 1000 00
    
    Tin, not alloyed 🖩
  - 8001 2000
    
    Tin alloys
    
    8001 2000 10
    
    Containing, by weight, 5 percent or less of lead 🖩
    
    8001 2000 50
    
    Containing, by weight, more than 5 percent but not more than 25 percent of lead 🖩
    
    8001 2000 90
    
    Containing, by weight, more than 25 percent of lead 🖩
- 8002 0000 00
  
  Tin waste and scrap 🖩
- 8003 0000 00
  
  Tin bars, rods, profiles and wire 🖩
- 8007 00
  
  Other articles of tin:
  - 8007 0010
    
    Articles not elsewhere specified or included of a type used for household, table or kitchen use; toilet and sanitary wares; all the foregoing not coated or plated with precious metal
    
    8007 0010 10
    
    Suitable for food or beverage service 🖩
    
    8007 0010 50
    
    Other 🖩
  - 8007 0020 00
    
    Tin plates, sheets and strip, of a thickness exceeding 0.2 mm 🖩
  - 8007 0031 00
    
    Tin foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.2 mm 🖩
  - 8007 0032 00
    
    Powders and flakes 🖩
  - 8007 0040 00
    
    Tin tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves) 🖩
  - 8007 0050 00
    
    Other 🖩
81

Other base metals; cermets; articles thereof
- 8101
  
  Tungsten (wolfram) and articles thereof, including waste and scrap:
  - 8101 1000 00
    
    Powders 🖩
  - Other:
    
    8101 9400 00
    
    Unwrought tungsten, including bars and rods obtained simply by sintering 🖩
    
    8101 9600 00
    
    Wire 🖩
    
    8101 9700 00
    
    Waste and scrap 🖩
    
    8101 99
    
    Other:
    
    8101 9910 00
    
    Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil 🖩
    
    8101 9980 00
    
    Other 🖩
- 8102
  
  Molybdenum and articles thereof, including waste and scrap:
  - 8102 1000 00
    
    Powders 🖩
  - Other:
    
    8102 9400 00
    
    Unwrought molybdenum, including bars and rods obtained simply by sintering 🖩
    
    8102 95
    
    Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil:
    
    8102 9530 00
    
    Bars and rods 🖩
    
    8102 9560 00
    
    Other 🖩
    
    8102 9600 00
    
    Wire 🖩
    
    8102 9700 00
    
    Waste and scrap 🖩
    
    8102 9900 00
    
    Other 🖩
- 8103
  
  Tantalum and articles thereof, including waste and scrap:
  - 8103 2000
    
    Unwrought tantalum, including bars and rods obtained simply by sintering; powders
    
    8103 2000 30
    
    Powders 🖩
    
    8103 2000 90
    
    Other 🖩
  - 8103 3000 00
    
    Waste and scrap 🖩
  - Other:
    
    8103 9100 00
    
    Crucibles 🖩
    
    8103 9900 00
    
    Other 🖩
- 8104
  
  Magnesium and articles thereof, including waste and scrap:
  - Unwrought magnesium:
    
    8104 1100 00
    
    Containing at least 99.8 percent by weight of magnesium 🖩
    
    8104 1900 00
    
    Other 🖩
  - 8104 2000 00
    
    Waste and scrap 🖩
  - 8104 3000 00
    
    Raspings, turnings and granules, graded according to size; powders 🖩
  - 8104 9000 00
    
    Other 🖩
- 8105
  
  Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, including waste and scrap:
  - 8105 20
    
    Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders:
    
    Unwrought cobalt:
    
    8105 2030 00
    
    Alloys 🖩
    
    8105 2060 00
    
    Other 🖩
    
    8105 2090 00
    
    Other 🖩
  - 8105 3000 00
    
    Waste and scrap 🖩
  - 8105 9000 00
    
    Other 🖩
- 8106
  
  Bismuth and articles thereof, including waste and scrap:
  - 8106 1000 00
    
    Containing more than 99.99 percent of bismuth, by weight 🖩
  - 8106 9000 00
    
    Other 🖩
- 8108
  
  Titanium and articles thereof, including waste and scrap:
  - 8108 2000
    
    Unwrought titanium; powders
    
    8108 2000 10
    
    Sponge 🖩
    
    Other:
    
    8108 2000 15
    
    Powders 🖩
    
    8108 2000 30
    
    Ingots 🖩
    
    8108 2000 95
    
    Other 🖩
  - 8108 3000 00
    
    Waste and scrap 🖩
  - 8108 90
    
    Other:
    
    8108 9030
    
    Articles of titanium
    
    8108 9030 30
    
    Castings 🖩
    
    8108 9030 60
    
    Other 🖩
    
    8108 9060
    
    Other
    
    8108 9060 20
    
    Blooms, sheet bars, and slabs 🖩
    
    8108 9060 31
    
    Other bars, rods, profiles and wire 🖩
    
    8108 9060 45
    
    Plates, sheets, strips and foil 🖩
    
    8108 9060 60
    
    Tubes and pipes 🖩
    
    8108 9060 75
    
    Other 🖩
- 8109
  
  Zirconium and articles thereof, including waste and scrap:
  - Unwrought zirconium; powders:
    
    8109 2100 00
    
    Containing less than 1 part hafnium to 500 parts zirconium by weight 🖩
    
    8109 2900 00
    
    Other 🖩
  - Waste and scrap:
    
    8109 3100 00
    
    Containing less than 1 part hafnium to 500 parts zirconium by weight 🖩
    
    8109 3900 00
    
    Other 🖩
  - Other:
    
    8109 9100 00
    
    Containing less than 1 part hafnium to 500 parts zirconium by weight 🖩
    
    8109 9900 00
    
    Other 🖩
- 8110
  
  Antimony and articles thereof, including waste and scrap:
  - 8110 1000 00
    
    Unwrought antimony; powders 🖩
  - 8110 2000 00
    
    Waste and scrap 🖩
  - 8110 9000 00
    
    Other 🖩
- 8111 00
  
  Manganese and articles thereof, including waste and scrap:
  - 8111 0030 00
    
    Waste and scrap 🖩
  - Other:
    
    Unwrought manganese:
    
    8111 0047 00
    
    Flake containing at least 99.5 percent by weight manganese 🖩
    
    8111 0049
    
    Other
    
    8111 0049 10
    
    Powder containing at least 99.5 percent by weight manganese 🖩
    
    8111 0049 90
    
    Other 🖩
    
    8111 0060 00
    
    Other 🖩
- 8112
  
  Beryllium, chromium, hafnium, rhenium, thallium, cadmium, germanium, vanadium, gallium, indium and niobium (columbium), and articles of these metals, including waste and scrap:
  - Beryllium:
    
    8112 1200 00
    
    Unwrought; powders 🖩
    
    8112 1300 00
    
    Waste and scrap 🖩
    
    8112 1900 00
    
    Other 🖩
  - Chromium:
    
    8112 2100 00
    
    Unwrought; powders 🖩
    
    8112 2200 00
    
    Waste and scrap 🖩
    
    8112 2900 00
    
    Other 🖩
  - Hafnium:
    
    8112 3100 00
    
    Unwrought; waste and scrap; powders 🖩
    
    8112 3900 00
    
    Other 🖩
  - Rhenium:
    
    8112 41
    
    Unwrought; waste and scrap; powders:
    
    8112 4110 00
    
    Waste and scrap 🖩
    
    8112 4150 00
    
    Unwrought; powders 🖩
    
    8112 4900 00
    
    Other 🖩
  - Thallium:
    
    8112 5100 00
    
    Unwrought; powders 🖩
    
    8112 5200 00
    
    Waste and scrap 🖩
    
    8112 5900 00
    
    Other 🖩
  - Cadmium:
    
    8112 6100 00
    
    Waste and scrap 🖩
    
    8112 69
    
    Other:
    
    8112 6910 00
    
    Unwrought cadmium; powders 🖩
    
    8112 6990 00
    
    Other 🖩
  - Other:
    
    8112 92
    
    Unwrought; waste and scrap; powders:
    
    8112 9207 00
    
    Waste and scrap 🖩
    
    Other:
    
    8112 9210 00
    
    Gallium 🖩
    
    8112 9230 00
    
    Indium 🖩
    
    8112 9240 00
    
    Niobium (columbium) 🖩
    
    Germanium:
    
    8112 9260 00
    
    Unwrought 🖩
    
    8112 9265 00
    
    Other 🖩
    
    8112 9270 00
    
    Vanadium 🖩
    
    8112 99
    
    Other:
    
    8112 9910 00
    
    Germanium 🖩
    
    8112 9920 00
    
    Vanadium 🖩
    
    8112 9991 00
    
    Other 🖩
- 8113 0000 00
  
  Cermets and articles thereof, including waste and scrap 🖩
82

Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
- 8201
  
  Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry:
  - 8201 1000 00
    
    Spades and shovels, and parts thereof 🖩
  - 8201 3000
    
    Mattocks, picks, hoes and rakes, and parts thereof
    
    8201 3000 10
    
    Mattocks and picks, and parts thereof 🖩
    
    8201 3000 80
    
    Other 🖩
  - 8201 40
    
    Axes, bill hooks and similar hewing tools, and parts thereof:
    
    8201 4030 00
    
    Machetes, and parts thereof 🖩
    
    8201 4060
    
    Other
    
    8201 4060 10
    
    Axes and adzes, and parts thereof 🖩
    
    8201 4060 80
    
    Other 🖩
  - 8201 5000 00
    
    Secateurs and similar one-handed pruners and shears (including poultry shears), and parts thereof 🖩
  - 8201 6000 00
    
    Hedge shears, two-handed pruning shears and similar two-handed shears, and parts thereof 🖩
  - 8201 90
    
    Other handtools of a kind used in agriculture, horticulture or forestry, and parts thereof:
    
    8201 9030 00
    
    Grass shears, and parts thereof 🖩
    
    8201 9040 00
    
    Forks, and parts thereof 🖩
    
    8201 9060 00
    
    Other 🖩
- 8202
  
  Handsaws, and metal parts thereof; blades for saws of all kinds (including slitting, slotting or toothless saw blades), and base metal parts thereof:
  - 8202 1000 00
    
    Handsaws, and parts (except blades) thereof 🖩
  - 8202 2000
    
    Bandsaw blades, and parts thereof
    
    8202 2000 30
    
    Metal cutting blades 🖩
    
    8202 2000 60
    
    Other 🖩
  - Circular saw blades (including slitting or slotting saw blades), and parts thereof:
    
    8202 3100 00
    
    With working part of steel 🖩
    
    8202 3900
    
    Other, including parts
    
    8202 3900 10
    
    With diamond working parts 🖩
    
    8202 3900 40
    
    Diamond sawblade cores 🖩
    
    8202 3900 70
    
    Other 🖩
  - 8202 40
    
    Chain saw blades, and parts thereof:
    
    8202 4030 00
    
    With cutting parts containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium 🖩
    
    8202 4060
    
    Other
    
    8202 4060 30
    
    In continuous lengths 🖩
    
    8202 4060 60
    
    Other 🖩
  - Other saw blades, and parts thereof:
    
    8202 91
    
    Straight saw blades, for working metal:
    
    8202 9130 00
    
    Hacksaw blades 🖩
    
    8202 9160 00
    
    Other 🖩
    
    8202 9900 00
    
    Other (including parts) 🖩
- 8203
  
  Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof:
  - 8203 10
    
    Files, rasps and similar tools:
    
    8203 1030 00
    
    Not over 11 cm in length 🖩
    
    8203 1060 00
    
    Over 11 cm but not over 17 cm in length 🖩
    
    8203 1090 00
    
    Over 17 cm in length 🖩
  - 8203 20
    
    Pliers (including cutting pliers), pincers, tweezers and similar tools, and parts thereof:
    
    8203 2020 00
    
    Tweezers 🖩
    
    Other:
    
    8203 2040 00
    
    Slip joint pliers 🖩
    
    8203 2060
    
    Other (except parts)
    
    8203 2060 30
    
    Pliers 🖩
    
    8203 2060 60
    
    Other 🖩
    
    8203 2080 00
    
    Parts 🖩
  - 8203 3000 00
    
    Metal cutting shears and similar tools, and parts thereof 🖩
  - 8203 40
    
    Pipe cutters, bolt cutters, perforating punches and similar tools, and parts thereof:
    
    8203 4030 00
    
    With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium 🖩
    
    8203 4060 00
    
    Other (including parts) 🖩
- 8204
  
  Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); socket wrenches, with or without handles, drives or extensions; base metal parts thereof:
  - Hand-operated spanners and wrenches, and parts thereof:
    
    8204 1100
    
    Nonadjustable, and parts thereof
    
    8204 1100 30
    
    Open-end, box and combination open-end and box wrenches 🖩
    
    8204 1100 60
    
    Other (including parts) 🖩
    
    8204 1200 00
    
    Adjustable, and parts thereof 🖩
  - 8204 2000 00
    
    Socket wrenches, with or without handles, drives and extensions, and parts thereof 🖩
- 8205
  
  Handtools (including glass cutters) not elsewhere specified or included; blow torches and similar self-contained torches; vises, clamps and the like, other than accessories for and parts of machine tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof:
  - 8205 1000 00
    
    Drilling, threading or tapping tools, and parts thereof 🖩
  - 8205 20
    
    Hammers and sledge hammers, and parts thereof:
    
    8205 2030 00
    
    With heads not over 1.5 kg each 🖩
    
    8205 2060 00
    
    With heads over 1.5 kg each 🖩
  - 8205 30
    
    Planes, chisels, gouges and similar cutting tools for working wood, and parts thereof:
    
    8205 3030 00
    
    With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium 🖩
    
    8205 3060 00
    
    Other (including parts) 🖩
  - 8205 4000 00
    
    Screwdrivers, and parts thereof 🖩
  - Other handtools (including glass cutters) and parts thereof:
    
    8205 51
    
    Household tools, and parts thereof:
    
    Of iron or steel:
    
    8205 5115 00
    
    Carving and butcher steels, with or without handles 🖩
    
    8205 5130
    
    Other (including parts)
    
    8205 5130 30
    
    Kitchen and table implements 🖩
    
    8205 5130 60
    
    Other (including parts) 🖩
    
    8205 5145 00
    
    Of copper 🖩
    
    8205 5160 00
    
    Of aluminum 🖩
    
    8205 5175 00
    
    Other 🖩
    
    8205 59
    
    Other:
    
    8205 5910 00
    
    Pipe tools, and parts thereof 🖩
    
    8205 5920 00
    
    Powder-actuated handtools, and parts thereof 🖩
    
    8205 5930
    
    Crowbars, track tools and wedges, and parts thereof
    
    8205 5930 10
    
    Crowbars 🖩
    
    8205 5930 80
    
    Other 🖩
    
    Other:
    
    Of iron or steel
    
    8205 5945 00
    
    Caulking guns 🖩
    
    8205 5955
    
    Other
    
    Edged handtools:
    
    8205 5955 05
    
    Single edge razor blades other than for shaving 🖩
    
    8205 5955 10
    
    Other 🖩
    
    8205 5955 60
    
    Other (including parts) 🖩
    
    8205 5960 00
    
    Of copper 🖩
    
    8205 5970 00
    
    Of aluminum 🖩
    
    8205 5980 00
    
    Other 🖩
  - 8205 6000 00
    
    Blow torches and similar self-contained torches, and parts thereof 🖩
  - 8205 7000
    
    Vises, clamps and the like, and parts thereof
    
    Vises:
    
    8205 7000 30
    
    Pipe 🖩
    
    8205 7000 60
    
    Other 🖩
    
    8205 7000 90
    
    Other (including parts) 🖩
  - 8205 90
    
    Other, including sets of articles of two or more subheadings of this heading:
    
    8205 9010 00
    
    Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof 🖩
    
    8205 9060 00
    
    Sets of articles of two or more of the foregoing subheadings 🖩
- 8206 0000 00
  
  Tools of two or more of headings 8202 to 8205, put up in sets for retail sale 🖩
- 8207
  
  Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof:
  - Rock drilling or earth boring tools, and parts thereof:
    
    8207 1300 00
    
    With working part of cermets 🖩
    
    8207 19
    
    Other, including parts:
    
    8207 1930
    
    With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium
    
    8207 1930 30
    
    Percussion rock drill bits 🖩
    
    Other:
    
    8207 1930 60
    
    Rotary rock drill bits, core bits and reamers 🖩
    
    8207 1930 90
    
    Other 🖩
    
    8207 1960
    
    Other
    
    8207 1960 30
    
    Percussion rock drill bits 🖩
    
    Other:
    
    Rotary rock drill bits, core bits and reamers:
    
    8207 1960 65
    
    With working part of diamonds 🖩
    
    8207 1960 70
    
    Other 🖩
    
    8207 1960 90
    
    Other 🖩
  - 8207 2000
    
    Dies for drawing or extruding metal, and parts thereof
    
    8207 2000 30
    
    Diamond wire drawing dies 🖩
    
    8207 2000 40
    
    Other dies 🖩
    
    8207 2000 70
    
    Parts 🖩
  - 8207 30
    
    Tools for pressing, stamping or punching, and parts thereof:
    
    8207 3030
    
    Suitable for cutting metal, and parts thereof
    
    8207 3030 20
    
    Tools 🖩
    
    8207 3030 50
    
    Parts 🖩
    
    8207 3060
    
    Not suitable for cutting metal, and parts thereof
    
    8207 3060 32
    
    Stamping dies not suitable for cutting metal 🖩
    
    8207 3060 62
    
    Metal forming dies, including thread-rolling dies 🖩
    
    8207 3060 92
    
    Other tools 🖩
    
    8207 3060 95
    
    Parts 🖩
  - 8207 40
    
    Tools for tapping or threading, and parts thereof:
    
    8207 4030 00
    
    With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium 🖩
    
    8207 4060 00
    
    Other 🖩
  - 8207 50
    
    Tools for drilling, other than for rock drilling, and parts thereof:
    
    8207 5020
    
    With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium
    
    8207 5020 30
    
    Masonry drills 🖩
    
    Twist drills:
    
    8207 5020 45
    
    Brad point 🖩
    
    8207 5020 55
    
    Other 🖩
    
    Other:
    
    8207 5020 70
    
    For woodworking 🖩
    
    8207 5020 80
    
    Other 🖩
    
    Other:
    
    8207 5040
    
    Suitable for cutting metal, and parts thereof
    
    8207 5040 30
    
    Twist drills 🖩
    
    8207 5040 60
    
    Other 🖩
    
    Not suitable for cutting metal, and parts thereof:
    
    8207 5060 00
    
    For handtools, and parts thereof 🖩
    
    8207 5080 00
    
    Other 🖩
  - 8207 6000
    
    Tools for boring or broaching, and parts thereof
    
    8207 6000 30
    
    Broaches 🖩
    
    8207 6000 35
    
    Reamers, except gun reamers 🖩
    
    8207 6000 61
    
    Other (including parts thereof) 🖩
  - 8207 70
    
    Tools for milling, and parts thereof:
    
    8207 7030
    
    With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium
    
    8207 7030 30
    
    End milling cutters 🖩
    
    8207 7030 40
    
    Router bits for woodworking 🖩
    
    8207 7030 60
    
    Other 🖩
    
    8207 7060
    
    Other
    
    8207 7060 30
    
    End milling cutters 🖩
    
    8207 7060 40
    
    Router bits not suitable for cutting metal 🖩
    
    8207 7060 60
    
    Other (including parts) 🖩
  - 8207 80
    
    Tools for turning:
    
    8207 8030 00
    
    With cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium 🖩
    
    8207 8060 00
    
    Other 🖩
  - 8207 90
    
    Other interchangeable tools, and parts thereof:
    
    8207 9015 00
    
    Files and rasps, including rotary files and rasps, and parts thereof 🖩
    
    Other:
    
    8207 9030
    
    Cutting tools with cutting part containing by weight over 0.2 percent of chromium, molybdenum, or tungsten or over 0.1 percent of vanadium
    
    8207 9030 30
    
    Hobs and other gear cutting tools 🖩
    
    For woodworking:
    
    8207 9030 75
    
    Cutterheads with interchangeable tools 🖩
    
    8207 9030 80
    
    Other 🖩
    
    8207 9030 85
    
    Other 🖩
    
    Other:
    
    8207 9045 00
    
    Suitable for cutting metal, and parts thereof 🖩
    
    Not suitable for cutting metal, and parts thereof:
    
    8207 9060 00
    
    For handtools, and parts thereof 🖩
    
    8207 9075
    
    Other
    
    8207 9075 45
    
    Cutterheads with interchangeable tools 🖩
    
    8207 9075 85
    
    Other 🖩
- 8208
  
  Knives and cutting blades, for machines or for mechanical appliances, and base metal parts thereof:
  - 8208 1000
    
    For metal working, and parts thereof
    
    8208 1000 30
    
    Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines 🖩
    
    8208 1000 60
    
    Other (including parts) 🖩
  - 8208 2000
    
    For wood working, and parts thereof
    
    8208 2000 30
    
    Over 73.7 cm in length, for veneer-cutting machines 🖩
    
    8208 2000 60
    
    Over 15.2 cm in length, for wood-chipper machines 🖩
    
    8208 2000 90
    
    Other (including parts) 🖩
  - 8208 3000
    
    For kitchen appliances or for machines used by the food industry, and parts thereof
    
    8208 3000 30
    
    For meat-slicing, meat-cutting or meat-chopping machines 🖩
    
    8208 3000 60
    
    Other (including parts) 🖩
  - 8208 40
    
    For agricultural, horticultural or forestry machines, and parts thereof:
    
    8208 4030 00
    
    Lawnmower blades 🖩
    
    8208 4060 00
    
    Other (including parts) 🖩
  - 8208 90
    
    Other:
    
    8208 9030 00
    
    For shoe machinery 🖩
    
    8208 9060 00
    
    Other (including parts) 🖩
- 8209 0000
  
  Plates, sticks, tips and the like for tools, unmounted, of cermets
  - 8209 0000 30
    
    Of sintered metal carbides 🖩
  - 8209 0000 60
    
    Of other cermets 🖩
- 8210 0000 00
  
  Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink, and base metal parts thereof 🖩
- 8211
  
  Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades and other base metal parts thereof:
  - 8211 1000 00
    
    Sets of assorted articles 🖩
  - Other:
    
    8211 91
    
    Table knives having fixed blades:
    
    8211 9110 00
    
    Knives with silver-plated handles 🖩
    
    Knives with stainless steel handles:
    
    With handles containing nickel or containing over 10 percent by weight of manganese:
    
    8211 9120 00
    
    Valued under 25¢ each, not over 25.9 cm in overall length 🖩
    
    8211 9125 00
    
    Other 🖩
    
    Other:
    
    8211 9130 00
    
    Valued under 25¢ each, not over 25.9 cm in overall length 🖩
    
    8211 9140 00
    
    Other 🖩
    
    8211 9150
    
    Knives with rubber or plastic handles
    
    8211 9150 30
    
    Steak knives 🖩
    
    8211 9150 60
    
    Other 🖩
    
    8211 9180
    
    Other
    
    8211 9180 30
    
    Steak knives 🖩
    
    8211 9180 60
    
    Other 🖩
    
    8211 92
    
    Other knives having fixed blades:
    
    With rubber or plastic handles:
    
    8211 9220 00
    
    Kitchen and butcher knives 🖩
    
    8211 9240
    
    Other
    
    8211 9240 50
    
    Sheath-type knives 🖩
    
    8211 9240 60
    
    Other 🖩
    
    Other:
    
    8211 9260 00
    
    Hunting knives with wood handles 🖩
    
    8211 9290
    
    Other
    
    8211 9290 30
    
    Kitchen and butcher knives 🖩
    
    8211 9290 45
    
    Sheath-type knives 🖩
    
    8211 9290 60
    
    Other 🖩
    
    8211 9300
    
    Knives having other than fixed blades
    
    8211 9300 31
    
    Folding two-handled multi-use tools in which one or more tools are housed in each handle and one or more of the tools is a folding knife blade 🖩
    
    8211 9300 35
    
    Pen knives, pocket knives and other knives which have folding blades 🖩
    
    8211 9300 60
    
    Other (including parts) 🖩
    
    8211 94
    
    Blades:
    
    8211 9410 00
    
    For knives having fixed blades 🖩
    
    8211 9450 00
    
    Other 🖩
    
    8211 95
    
    Handles of base metal:
    
    8211 9510 00
    
    For table knives having fixed blades 🖩
    
    8211 9550 00
    
    For other knives having fixed blades 🖩
    
    8211 9590 00
    
    Other 🖩
- 8212
  
  Razors and razor blades (including razor blade blanks in strips), and base metal parts thereof:
  - 8212 1000 00
    
    Razors 🖩
  - 8212 2000
    
    Safety razor blades, including razor blade blanks in strips
    
    8212 2000 05
    
    Single edge razor blades for shaving 🖩
    
    8212 2000 10
    
    Other 🖩
  - 8212 9000 00
    
    Other parts 🖩
- 8213 00
  
  Scissors, tailors' shears and similar shears, and blades and other base metal parts thereof:
  - 8213 0030 00
    
    Valued not over $1.75/dozen 🖩
  - Valued over $1.75/dozen:
    
    8213 0060 00
    
    Pinking shears, valued over $30/dozen 🖩
    
    8213 0090 00
    
    Other (including parts) 🖩
- 8214
  
  Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, chopping or mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files); base metal parts thereof:
  - 8214 1000 00
    
    Paper knives, letter openers, erasing knives, pencil sharpeners (nonmechanical) and blades and other parts thereof 🖩
  - 8214 20
    
    Manicure or pedicure sets and instruments (including nail files), and parts thereof:
    
    8214 2030 00
    
    Cuticle or cornknives, cuticle pushers, nail files, nailcleaners, nail nippers and clippers, all the foregoing used for manicure or pedicure purposes, and parts thereof 🖩
    
    Manicure and pedicure sets, and combinations thereof:
    
    8214 2060 00
    
    In leather containers 🖩
    
    8214 2090 00
    
    Other 🖩
  - 8214 90
    
    Other:
    
    Cleavers and the like not elsewhere specified or included:
    
    8214 9030 00
    
    Cleavers with their handles 🖩
    
    8214 9060 00
    
    Other 🖩
    
    8214 9090 00
    
    Other (including parts) 🖩
- 8215
  
  Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware; and base metal parts thereof:
  - 8215 1000 00
    
    Sets of assorted articles containing at least one article plated with precious metal 🖩
  - 8215 2000 00
    
    Other sets of assorted articles 🖩
  - Other:
    
    8215 91
    
    Plated with precious metal:
    
    8215 9130 00
    
    Forks 🖩
    
    8215 9160 00
    
    Spoons and ladles 🖩
    
    8215 9190 00
    
    Other (including parts) 🖩
    
    8215 99
    
    Other:
    
    Forks:
    
    With stainless steel handles:
    
    With handles containing nickel or containing over 10 percent by weight of manganese:
    
    8215 9901 00
    
    Valued under 25¢ each, not over 25.9 cm in overall length 🖩
    
    8215 9905 00
    
    Other 🖩
    
    Other:
    
    8215 9910 00
    
    Valued under 25¢ each 🖩
    
    8215 9915 00
    
    Other 🖩
    
    8215 9920 00
    
    With rubber or plastic handles 🖩
    
    Other:
    
    8215 9922 00
    
    Without their handles 🖩
    
    Other:
    
    8215 9924 00
    
    Table forks (including table serving forks) and barbecue forks with wooden handles 🖩
    
    8215 9926 00
    
    Other 🖩
    
    Spoons and ladles:
    
    With stainless steel handles:
    
    8215 9930 00
    
    Spoons valued under 25¢ each 🖩
    
    8215 9935 00
    
    Other 🖩
    
    8215 9940
    
    With base metal (except stainless steel) or nonmetal handles
    
    8215 9940 30
    
    Tablespoons and table ladles 🖩
    
    8215 9940 60
    
    Other 🖩
    
    8215 9945 00
    
    Other 🖩
    
    8215 9950 00
    
    Other (including parts) 🖩
83

Miscellaneous articles of base metal
- 8301
  
  Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys and parts of any of the foregoing articles, of base metal:
  - 8301 10
    
    Padlocks:
    
    Not of cylinder or pin tumbler construction:
    
    8301 1020 00
    
    Not over 3.8 cm in width 🖩
    
    8301 1040 00
    
    Over 3.8 cm but not over 6.4 cm in width 🖩
    
    8301 1050 00
    
    Over 6.4 cm in width 🖩
    
    Of cylinder or pin tumbler construction:
    
    8301 1060
    
    Not over 3.8 cm in width
    
    8301 1060 20
    
    Lock bodies containing hardened steel components with attached (or insertable) flexible cable composed of wire strands and hardened steel beads 🖩
    
    8301 1060 80
    
    Other 🖩
    
    8301 1080 00
    
    Over 3.8 cm but not over 6.4 cm in width 🖩
    
    8301 1090 00
    
    Over 6.4 cm in width 🖩
  - 8301 2000
    
    Locks of a kind used on motor vehicles
    
    8301 2000 30
    
    Non-integral steering wheel immobilizer devices 🖩
    
    8301 2000 60
    
    Other 🖩
  - 8301 3000
    
    Locks of a kind used for furniture
    
    8301 3000 60
    
    Cam locks and other locks suitable for use with chests, drawers and similar items 🖩
    
    8301 3000 90
    
    Other 🖩
  - 8301 40
    
    Other locks:
    
    8301 4030 00
    
    Luggage locks 🖩
    
    8301 4060
    
    Other
    
    8301 4060 30
    
    Door locks, locksets and other locks suitable for use with interior or exterior doors (except garage, overhead or sliding doors) 🖩
    
    8301 4060 60
    
    Other 🖩
  - 8301 5000 00
    
    Clasps and frames with clasps, incorporating locks 🖩
  - 8301 6000 00
    
    Parts 🖩
  - 8301 7000 00
    
    Keys presented separately 🖩
- 8302
  
  Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal; and base metal parts thereof:
  - 8302 10
    
    Hinges, and parts thereof:
    
    Of iron or steel, of aluminum or of zinc:
    
    8302 1030 00
    
    Designed for motor vehicles 🖩
    
    8302 1060
    
    Other
    
    8302 1060 30
    
    Suitable for interior and exterior doors (except garage, overhead or sliding doors) 🖩
    
    8302 1060 60
    
    Suitable for furniture and cabinets 🖩
    
    8302 1060 90
    
    Other 🖩
    
    8302 1090
    
    Other
    
    8302 1090 30
    
    Suitable for interior and exterior doors (except garage, overhead or sliding doors) 🖩
    
    8302 1090 60
    
    Suitable for furniture and cabinets 🖩
    
    8302 1090 90
    
    Other 🖩
  - 8302 2000 00
    
    Castors, and parts thereof 🖩
  - 8302 30
    
    Other mountings, fittings and similar articles suitable for motor vehicles; and parts thereof:
    
    8302 3030
    
    Of iron or steel, of aluminum or of zinc
    
    8302 3030 10
    
    Pneumatic cylinders for lifting, lowering, dampening or counter-balancing 🖩
    
    8302 3030 60
    
    Other 🖩
    
    8302 3060 00
    
    Other 🖩
  - Other mountings, fittings and similar articles, and parts thereof:
    
    8302 41
    
    Suitable for buildings:
    
    8302 4130 00
    
    Door closers (except automatic door closers), and parts thereof 🖩
    
    Other:
    
    8302 4160
    
    Of iron or steel, of aluminum or of zinc
    
    Suitable for interior and exterior doors (except garage, overhead or sliding doors):
    
    8302 4160 15
    
    Doorstops, chain door fasteners, door pulls, kick plates, door knockers and escutcheons 🖩
    
    8302 4160 45
    
    Other 🖩
    
    8302 4160 50
    
    For curtains, draperies and window shades 🖩
    
    8302 4160 80
    
    Other 🖩
    
    8302 4190
    
    Other
    
    Suitable for interior and exterior doors (except garage, overhead or sliding doors):
    
    8302 4190 15
    
    Doorstops, chain door fasteners, door pulls, kick plates, door knockers and escutcheons 🖩
    
    8302 4190 45
    
    Other 🖩
    
    8302 4190 50
    
    For curtains, draperies and window shades 🖩
    
    8302 4190 80
    
    Other 🖩
    
    8302 42
    
    Other, suitable for furniture:
    
    8302 4230
    
    Of iron or steel, of aluminum or of zinc
    
    8302 4230 10
    
    Pneumatic cylinders for lifting, lowering, dampening or counterbalancing 🖩
    
    8302 4230 15
    
    Drawer slides 🖩
    
    8302 4230 65
    
    Other 🖩
    
    8302 4260 00
    
    Other 🖩
    
    8302 49
    
    Other:
    
    Harness and saddlery or riding-bridle hardware, and parts thereof:
    
    8302 4920 00
    
    Coated or plated with precious metal 🖩
    
    8302 4940 00
    
    Other 🖩
    
    Other:
    
    8302 4960
    
    Of iron or steel, of aluminum or of zinc
    
    8302 4960 35
    
    Pneumatic cylinders for lifting, lowering, dampening or counterbalancing 🖩
    
    Other:
    
    8302 4960 45
    
    For railway vehicles 🖩
    
    8302 4960 55
    
    For aircraft, vessels and other vehicles (except motor vehicles) of section XVII 🖩
    
    8302 4960 85
    
    Other 🖩
    
    8302 4980
    
    Other
    
    For railway vehicles, aircraft, vessels and other vehicles (except motor vehicles) of section XVII:
    
    8302 4980 40
    
    Of copper 🖩
    
    8302 4980 50
    
    Other 🖩
    
    8302 4980 90
    
    Other 🖩
  - 8302 5000 00
    
    Hat-racks, hat pegs, brackets and similar fixtures, and parts thereof 🖩
  - 8302 60
    
    Automatic door closers, and parts thereof:
    
    8302 6030 00
    
    Automatic door closers 🖩
    
    8302 6090 00
    
    Parts 🖩
- 8303 0000 00
  
  Armored or reinforced safes, strong-boxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, and parts thereof, of base metal 🖩
- 8304 0000 00
  
  Desk-top filing or card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment and parts thereof, of base metal, other than office furniture of heading 9403 🖩
- 8305
  
  Fittings for looseleaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, and parts thereof, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal:
  - 8305 1000
    
    Fittings for looseleaf binders or files
    
    8305 1000 10
    
    Ring binder mechanisms 🖩
    
    8305 1000 50
    
    Other 🖩
  - 8305 2000 00
    
    Staples in strips 🖩
  - 8305 90
    
    Other, including parts:
    
    8305 9030
    
    Paper clips, and parts thereof
    
    8305 9030 10
    
    Wholly of wire 🖩
    
    8305 9030 50
    
    Other 🖩
    
    8305 9060 00
    
    Other 🖩
- 8306
  
  Bells, gongs and the like, nonelectric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal; and base metal parts thereof:
  - 8306 1000 00
    
    Bells, gongs and the like, and parts thereof 🖩
  - Statuettes and other ornaments, and parts thereof:
    
    8306 2100 00
    
    Plated with precious metal, and parts thereof 🖩
    
    8306 2900 00
    
    Other 🖩
  - 8306 3000 00
    
    Photograph, picture or similar frames; mirrors; and parts thereof 🖩
- 8307
  
  Flexible tubing of base metal, with or without fittings:
  - 8307 10
    
    Of iron or steel:
    
    8307 1030 00
    
    With fittings 🖩
    
    8307 1060 00
    
    Other 🖩
  - 8307 90
    
    Of other base metal:
    
    8307 9030 00
    
    With fittings 🖩
    
    8307 9060 00
    
    Other 🖩
- 8308
  
  Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal:
  - 8308 1000 00
    
    Hooks, eyes and eyelets 🖩
  - 8308 20
    
    Tubular or bifurcated rivets:
    
    8308 2030 00
    
    Of iron or steel and not brightened, not lathed and not machined 🖩
    
    8308 2060 00
    
    Other 🖩
  - 8308 90
    
    Other, including parts:
    
    8308 9030 00
    
    Beads and spangles of base metal 🖩
    
    8308 9060 00
    
    Buckles and buckle clasps, and parts thereof 🖩
    
    8308 9090 00
    
    Other 🖩
- 8309
  
  Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, and parts thereof, of base metal:
  - 8309 1000 00
    
    Crown corks (including crown seals and caps), and parts thereof 🖩
  - 8309 9000
    
    Other
    
    Of aluminum:
    
    8309 9000 20
    
    For cans of a kind used for the conveyance of beverages as described in statistical note 1 to this chapter 🖩
    
    8309 9000 25
    
    Other 🖩
    
    Other:
    
    8309 9000 80
    
    Of steel 🖩
    
    8309 9000 85
    
    Other 🖩
- 8310 0000 00
  
  Sign plates, name plates, address plates and similar plates, numbers, letters and other symbols, and parts thereof, of base metal, excluding those of heading 9405 🖩
- 8311
  
  Wire, rods, tubes, plates, electrodes and similar products of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying; base metal parts thereof:
  - 8311 1000 00
    
    Coated electrodes of base metal, for electric arc-welding 🖩
  - 8311 2000 00
    
    Cored wire of base metal, for electric arc-welding 🖩
  - 8311 30
    
    Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame:
    
    8311 3030 00
    
    Lead-tin solders 🖩
    
    8311 3060 00
    
    Other 🖩
  - 8311 9000 00
    
    Other 🖩

Section Notes

SECTION XV: BASE METALS AND ARTICLES

Notes

1. This section does not cover:
- (a) Prepared paints, inks or other products with a basis of metallic flakes or powder (headings 3207 to 3210, 3212, 3213 or 3215);
- (b) Ferrocerium or other pyrophoric alloys (heading 3606);
- (c) Headgear or parts thereof of heading 6506 or 6507;
- (d) Umbrella frames or other articles of heading 6603;
- (e) Goods of chapter 71 (for example, precious metal alloys, base metal clad with precious metal, imitation jewelry);
- (f) Articles of section XVI (machinery, mechanical appliances and electrical goods);
- (g) Assembled railway or tramway track (heading 8608) or other articles of section XVII (vehicles, ships and boats, aircraft);
- (h) Instruments or apparatus of section XVIII, including clock or watch springs;
- (ij) Lead shot prepared for ammunition (heading 9306) or other articles of section XIX (arms and ammunition);
- (k) Articles of chapter 94 (for example, furniture, mattress supports, luminaires and lighting fittings, illuminated signs, prefabricated buildings);
- (l) Articles of chapter 95 (for example, toys, games, sports equipment);
- (m) Hand sieves, buttons, pens, pencil-holders, pen nibs, monopods, bipods, tripods and similar articles or other articles of chapter 96 (miscellaneous manufactured articles); or
- (n) Articles of chapter 97 (for example, works of art).
2. Throughout the tariff schedule, the expression "parts of general use" means:
- (a) Articles of heading 7307, 7312, 7315, 7317 or 7318 and similar articles of other base metal, other than articles specially designed for use exclusively in implants in medical, surgical, dental or veterinary sciences (heading 9021);
- (b) Springs and leaves for springs, of base metal, other than clock or watch springs (heading 9114); and
- (c) Articles of heading 8301, 8302, 8308 or 8310 and frames and mirrors, of base metal, of heading 8306.
In chapters 73 to 76 and 78 to 82 (but not in heading 7315) references to parts of goods do not include references to parts of general use as defined above.
Subject to the preceding paragraph and to note 1 to chapter 83, the articles of chapter 82 or 83 are excluded from chapters 72 to 76 and 78 to 81.
3. Throughout the schedule, the expression "base metals" means: iron and steel, copper, nickel, aluminum, lead, zinc, tin, tungsten (wolfram), molybdenum, tantalum, magnesium, cobalt, bismuth, cadmium, titanium, zirconium, antimony, manganese, beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium.
4. Throughout the schedule, the term "cermets" means products containing a microscopic heterogeneous combination of a metallic component and a ceramic component. The term "cermets" includes sintered metal carbides (metal carbides sintered with a metal).
5. Classification of alloys (other than ferroalloys and master alloys as defined in chapters 72 and 74):
- (a) An alloy of base metals is to be classified as an alloy of the metal which predominates by weight over each of the other metals.
- (b) An alloy composed of base metals of this section and of elements not falling within this section is to be treated as an alloy of base metals of this section if the total weight of such metals equals or exceeds the total weight of the other elements present.
- (c) In this section the term "alloys" includes sintered mixtures of metal powders, heterogeneous intimate mixtures obtained by melting (other than cermets) and intermetallic compounds.
6. Unless the context otherwise requires, any reference in the tariff schedule to a base metal includes a reference to alloys which, by virtue of note 5 above, are to be classified as alloys of that metal.
7. Classification of composite articles:
Except where the headings otherwise require, articles of base metal (including articles of mixed materials treated as articles of base metal under the General Rules of Interpretation) containing two or more base metals are to be treated as articles of the base metal predominating by weight over each of the other metals. For this purpose:
- (a) Iron and steel, or different kinds of iron or steel, are regarded as one and the same metal;
- (b) An alloy is regarded as being entirely composed of that metal as an alloy of which, by virtue of note 5, it is classified; and
- (c) A cermet of heading 8113 is regarded as a single base metal.
8. In this section, the following expressions have the meanings hereby assigned to them:
- (a) Waste and scrap
  - (i) All metal waste and scrap;
  - (ii) Metal goods definitely not usable as such because of breakage, cutting-up, wear or other reasons.
- (b) Powders
  Products of which 90 percent or more by weight passes through a sieve having a mesh aperture of 1 mm.
9. For the purposes of chapters 74 to 76 and 78 to 81, the following expressions have the meanings hereby assigned to them:
- (a) Bars and rods
Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
Wire bars and billets of chapter 74 with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire rod) or tubes, are however to be taken to be unwrought copper of heading 7403. This provision applies mutatis mutandis to the products of chapter 81.
- (b) Profiles
Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
- (c) Wire
Rolled, extruded or drawn products, in coils, which have a uniform solid cross section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including “modified rectangular”) cross section exceeds one-tenth of the width.
- (d) Plates, sheets, strip and foil
Flat-surfaced products (other than the unwrought products), coiled or not, of solid rectangular (other than square) cross section with or without rounded corners (including “modified rectangles” of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
-of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;
-of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.
Headings for plates, sheets, strip, and foil apply, inter alia, to plates, sheets, strip, and foil with patterns (for example, grooves, ribs, checkers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
- (e) Tubes and pipes
Hollow products, coiled or not, which have a uniform cross section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

Additional U.S. Note

1. For the purposes of this section, the term "unwrought" refers to metal, whether or not refined, in the form of ingots, blocks, lumps, billets, cakes, slabs, pigs, cathodes, anodes, briquettes, cubes, sticks, grains, sponge, pellets, flattened pellets, rounds, rondelles, shot and similar manufactured primary forms, but does not cover rolled, forged, drawn or extruded products, tubular products or cast or sintered forms which have been machined or processed otherwise than by simple trimming, scalping or descaling.

Section XV: Base Metals and Articles of Base Metal

Section Notes

SECTION XV: BASE METALS AND ARTICLES

Stay Updated