7306.40.50 - Having a wall thickness of 1.65 mm or more

Sub-classifications

Commodity Code

Description

7306 4050 05

Of high-nickel alloy steel 🖩
Other:
- 7306 4050 15
  
  Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn 🖩
- Other, cold-drawn or cold-rolled (cold- reduced):
  - 7306 4050 40
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel 🖩
  - Other:
    
    7306 4050 42
    
    Containing less than 15 percent by weight of chromium 🖩
    
    7306 4050 44
    
    Other 🖩
- Other:
  - With an outside diameter not exceeding 114.3 mm:
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7306 4050 62
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum 🖩
    
    7306 4050 64
    
    Other 🖩
    
    7306 4050 80
    
    Other 🖩
  - With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm:
    
    7306 4050 85
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel 🖩
    
    7306 4050 90
    
    Other 🖩

Overview

This HTS category, 7306.40.50, specifically classifies welded tubes, pipes, and hollow profiles made of iron or steel, which have a circular cross-section and are constructed from stainless steel. The defining characteristic for inclusion in this subcategory is a wall thickness that measures 1.65 millimeters or greater. These are typically robust tubular products intended for applications where significant structural integrity or fluid containment under pressure is required.

Distinguishing this category from its sibling, 7306.40.10, hinges solely on the wall thickness. While both cover welded, circular, stainless steel tubes, pipes, and hollow profiles, 7306.40.10 encompasses those with a wall thickness *less than* 1.65 mm. Therefore, this current category is reserved for the heavier-gauge stainless steel variants.

The subcategories under 7306.40.50 further refine the classification based on the specific alloy composition of the stainless steel. The option 7306.40.50.05 is designated for products made of "high-nickel alloy steel," indicating a premium grade stainless steel with a significant nickel content. All other stainless steel variants that meet the circular cross-section, welded construction, and wall thickness of 1.65 mm or more, but are not specifically high-nickel alloy steel, fall into the "Other" subdivision.

Frequently Asked Questions

›What is HTS code 7306.40.50?

HTS code 7306.40.50 covers Having a wall thickness of 1.65 mm or more under the US Harmonized Tariff Schedule. It falls under Chapter 73: Articles of iron or steel.

›What products are classified under 7306.40.50?

This classification covers Having a wall thickness of 1.65 mm or more. It is a subcategory of Other, welded, of circular cross section, of stainless steel: (7306.40).

›How many HTS codes are under 7306.40.50?

There are 2 direct subcategories under this classification.

›What are the subcategories under 7306.40.50?

This category contains 2 subcategories: Of high-nickel alloy steel, Other:.

Go up to 7306.40 · Go up to Chapter 73: Articles of iron or steel

7306.40.50 - Having a wall thickness of 1.65 mm or more

Sub-classifications

Overview

Frequently Asked Questions

Stay Updated