Chapter 72: Iron and steel

Code

Description

7201

Pig iron and spiegeleisen in pigs, blocks or other primary forms:
- 7201 1000 00
  
  Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus
- 7201 2000 00
  
  Nonalloy pig iron containing by weight more than 0.5 percent of phosphorus
- 7201 50
  
  Alloy pig iron; spiegeleisen:
  - 7201 5030 00
    
    Alloy pig iron
  - 7201 5060 00
    
    Spiegeleisen
7202

Ferroalloys:
- Ferromanganese:
  - 7202 11
    
    Containing by weight more than 2 percent of carbon:
    
    7202 1110 00
    
    Containing by weight more than 2 percent but not more than 4 percent of carbon
    
    7202 1150 00
    
    Containing by weight more than 4 percent of carbon
  - 7202 19
    
    Other:
    
    7202 1910 00
    
    Containing by weight not more than 1 percent of carbon
    
    7202 1950 00
    
    Containing by weight more than 1 percent but not more than 2 percent of carbon
- Ferrosilicon:
  - 7202 21
    
    Containing by weight more than 55 percent of silicon:
    
    Containing by weight more than 55 percent but not more than 80 percent of silicon:
    
    7202 2110 00
    
    Containing by weight more than 3 percent of calcium
    
    7202 2150 00
    
    Other
    
    7202 2175 00
    
    Containing by weight more than 80 percent but not more than 90 percent of silicon
    
    7202 2190 00
    
    Containing by weight more than 90 percent of silicon
  - 7202 2900
    
    Other
    
    7202 2900 10
    
    Containing by weight over 2 percent of magnesium
    
    7202 2900 50
    
    Other
- 7202 3000 00
  
  Ferrosilicon manganese
- Ferrochromium:
  - 7202 4100 00
    
    Containing by weight more than 4 percent of carbon
  - 7202 49
    
    Other:
    
    7202 4910 00
    
    Containing by weight more than 3 percent of carbon
    
    7202 4950
    
    Other
    
    7202 4950 10
    
    Containing by weight more than 0.5 percent of carbon
    
    7202 4950 90
    
    Other
- 7202 5000 00
  
  Ferrosilicon chromium
- 7202 6000 00
  
  Ferronickel
- 7202 7000 00
  
  Ferromolybdenum
- 7202 8000 00
  
  Ferrotungsten and ferrosilicon tungsten
- Other:
  - 7202 9100 00
    
    Ferrotitanium and ferrosilicon titanium
  - 7202 9200 00
    
    Ferrovanadium
  - 7202 93
    
    Ferroniobium:
    
    7202 9340 00
    
    Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon
    
    7202 9380 00
    
    Other
  - 7202 99
    
    Other:
    
    7202 9910 00
    
    Ferrozirconium
    
    7202 9920 00
    
    Calcium silicon
    
    7202 9980
    
    Other
    
    7202 9980 20
    
    Ferrophosphorus
    
    7202 9980 40
    
    Other
7203

Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 percent, in lumps, pellets or similar forms:
- 7203 1000 00
  
  Ferrous products obtained by direct reduction of iron ore
- 7203 9000 00
  
  Other
7204

Ferrous waste and scrap; remelting scrap ingots of iron or steel:
- 7204 1000 00
  
  Waste and scrap of cast iron
- Waste and scrap of alloy steel:
  - 7204 2100 00
    
    Of stainless steel
  - 7204 2900 00
    
    Other
- 7204 3000 00
  
  Waste and scrap of tinned iron or steel
- Other waste and scrap:
  - 7204 4100
    
    Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
    
    7204 4100 20
    
    No. 1 bundles
    
    7204 4100 40
    
    No. 2 bundles
    
    7204 4100 60
    
    Borings, shovelings and turnings
    
    7204 4100 80
    
    Other
  - 7204 4900
    
    Other
    
    7204 4900 20
    
    No. 1 heavy melting
    
    7204 4900 40
    
    No. 2 heavy melting
    
    Other:
    
    7204 4900 60
    
    Cut plate and structural
    
    7204 4900 70
    
    Shredded
    
    7204 4900 80
    
    Other
- 7204 5000 00
  
  Remelting scrap ingots
7205

Granules and powders, of pig iron, spiegeleisen, iron or steel:
- 7205 1000 00
  
  Granules
- Powders:
  - 7205 2100 00
    
    Of alloy steel
  - 7205 2900 00
    
    Other
- II. IRON AND NONALLOY STEEL
7206

Iron and nonalloy steel in ingots or other primary forms (excluding iron of heading 7203):
- 7206 1000 00
  
  Ingots
- 7206 9000 00
  
  Other
7207

Semifinished products of iron or nonalloy steel:
- Containing by weight less than 0.25 percent of carbon:
  - 7207 1100 00
    
    Of rectangular (including square) cross section, the width measuring less than twice the thickness
  - 7207 1200
    
    Other, of rectangular (other than square) cross section
    
    7207 1200 10
    
    Having a width measuring less than four times the thickness
    
    7207 1200 50
    
    Having a width measuring at least four times the thickness
  - 7207 1900
    
    Other
    
    7207 1900 30
    
    Of circular cross section
    
    7207 1900 90
    
    Other
- 7207 2000
  
  Containing by weight 0.25 percent or more of carbon
  - Of rectangular (including square) cross section:
    
    7207 2000 25
    
    Having a width measuring less than four times the thickness
    
    7207 2000 45
    
    Having a width measuring at least four times the thickness
  - 7207 2000 75
    
    Of circular cross section
  - 7207 2000 90
    
    Other
7208

Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
- 7208 10
  
  In coils, not further worked than hot-rolled, with patterns in relief:
  - 7208 1015 00
    
    Pickled
  - Other:
    
    7208 1030 00
    
    Of a thickness of 4.75 mm or more
    
    7208 1060 00
    
    Of a thickness of less than 4.75 mm
- Other, in coils, not further worked than hot-rolled, pickled:
  - 7208 25
    
    Of a thickness of 4.75 mm or more:
    
    7208 2530 00
    
    Of high-strength steel
    
    7208 2560 00
    
    Other
  - 7208 2600
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    7208 2600 30
    
    High-strength steel
    
    7208 2600 60
    
    Other
  - 7208 2700
    
    Of a thickness of less than 3 mm
    
    High-strength steel:
    
    7208 2700 40
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
    
    7208 2700 45
    
    Other
    
    7208 2700 60
    
    Other
- Other, in coils, not further worked than hot-rolled:
  - 7208 3600
    
    Of a thickness exceeding 10 mm
    
    7208 3600 30
    
    High-strength steel
    
    7208 3600 60
    
    Other
  - 7208 3700
    
    Of a thickness of 4.75 mm or more but not exceeding 10 mm
    
    7208 3700 30
    
    High-strength steel
    
    7208 3700 60
    
    Other
  - 7208 3800
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    7208 3800 15
    
    High-strength steel
    
    Other:
    
    7208 3800 30
    
    With untrimmed edges
    
    7208 3800 90
    
    Other
  - 7208 3900
    
    Of a thickness of less than 3 mm
    
    High-strength steel:
    
    7208 3900 20
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
    
    7208 3900 25
    
    Other
    
    Other:
    
    7208 3900 30
    
    With untrimmed edges
    
    7208 3900 90
    
    Other
- 7208 40
  
  Not in coils, not further worked than hot-rolled, with patterns in relief:
  - 7208 4030
    
    Of a thickness of 4.75 mm or more
    
    7208 4030 30
    
    Of a thickness exceeding 10 mm
    
    7208 4030 60
    
    Other
  - 7208 4060
    
    Of a thickness of less than 4.75 mm
    
    7208 4060 30
    
    Of a thickness less than 3 mm
    
    7208 4060 60
    
    Other
- Other, not in coils, not further worked than hot-rolled:
  - 7208 5100
    
    Of a thickness exceeding 10 mm
    
    7208 5100 30
    
    Universal mill plate
    
    Other:
    
    7208 5100 45
    
    Of high-strength steel
    
    7208 5100 60
    
    Other
  - 7208 5200 00
    
    Of a thickness of 4.75 mm or more but not exceeding 10 mm
  - 7208 5300 00
    
    Of a thickness of 3 mm or more but less than 4.75 mm
  - 7208 5400 00
    
    Of a thickness of less than 3 mm
- 7208 9000 00
  
  Other
7209

Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated:
- In coils, not further worked than cold-rolled (cold-reduced):
  - 7209 1500 00
    
    Of a thickness of 3 mm or more
  - 7209 1600
    
    Of a thickness exceeding 1 mm but less than 3 mm
    
    Of high-strength steel:
    
    Annealed:
    
    7209 1600 40
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
    
    7209 1600 45
    
    Other
    
    7209 1600 60
    
    Other
    
    Other:
    
    7209 1600 70
    
    Annealed
    
    7209 1600 91
    
    Other
  - 7209 1700
    
    Of a thickness of 0.5 mm or more but not exceeding 1 mm
    
    Of high-strength steel:
    
    Annealed:
    
    7209 1700 40
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
    
    7209 1700 45
    
    Other
    
    7209 1700 60
    
    Other
    
    Other:
    
    7209 1700 70
    
    Annealed
    
    7209 1700 91
    
    Other
  - 7209 18
    
    Of a thickness of less than 0.5 mm:
    
    7209 1815
    
    Of high-strength steel
    
    7209 1815 30
    
    Annealed
    
    7209 1815 60
    
    Other
    
    Other:
    
    7209 1825
    
    Of a thickness of less than 0.361 mm (blackplate)
    
    7209 1825 20
    
    Annealed
    
    7209 1825 85
    
    Other
    
    7209 1860
    
    Other
    
    7209 1860 20
    
    Annealed
    
    7209 1860 90
    
    Other
- Not in coils, not further worked than cold-rolled (cold-reduced):
  - 7209 2500 00
    
    Of a thickness of 3 mm or more
  - 7209 2600 00
    
    Of a thickness exceeding 1 mm but less than 3 mm
  - 7209 2700 00
    
    Of a thickness of 0.5 mm or more but not exceeding 1 mm
  - 7209 2800 00
    
    Of a thickness of less than 0.5 mm
- 7209 9000 00
  
  Other
7210

Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated:
- Plated or coated with tin:
  - 7210 1100 00
    
    Of a thickness of 0.5 mm or more
  - 7210 1200 00
    
    Of a thickness of less than 0.5 mm
- 7210 2000 00
  
  Plated or coated with lead, including terne-plate
- 7210 3000
  
  Electrolytically plated or coated with zinc
  - 7210 3000 30
    
    Of high-strength steel
  - 7210 3000 60
    
    Other
- Otherwise plated or coated with zinc:
  - 7210 4100 00
    
    Corrugated
  - 7210 4900
    
    Other
    
    Of high-strength steel:
    
    7210 4900 40
    
    “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter
    
    7210 4900 45
    
    Other
    
    Other:
    
    7210 4900 91
    
    Of a thickness of 0.4 mm or more
    
    7210 4900 95
    
    Other
- 7210 5000
  
  Plated or coated with chromium oxides or with chromium and chromium oxides
  - 7210 5000 20
    
    Of a width less than 1050 mm
    
    7210 5000 90
    
    Other
- Plated or coated with aluminum:
  - 7210 6100 00
    
    Plated or coated with aluminum-zinc alloys
  - 7210 6900 00
    
    Other
- 7210 70
  
  Painted, varnished or coated with plastics:
  - 7210 7030 00
    
    Not coated or plated with metal and not clad
  - 7210 7060
    
    Other
    
    Zinc coated or plated:
    
    7210 7060 30
    
    Electrolytically coated or plated
    
    7210 7060 60
    
    Other
    
    7210 7060 90
    
    Other
- 7210 90
  
  Other:
  - 7210 9010 00
    
    Clad
  - Other:
    
    7210 9060 00
    
    Electrolytically coated or plated with base metal
    
    7210 9090 00
    
    Other
7211

Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated:
- Not further worked than hot-rolled:
  - 7211 1300 00
    
    Universal mill plate
  - 7211 1400
    
    Other, of a thickness of 4.75 mm or more
    
    7211 1400 30
    
    Of high-strength steel
    
    Other:
    
    7211 1400 45
    
    Not in coils
    
    7211 1400 90
    
    Other
  - 7211 19
    
    Other:
    
    Of a width of less than 300 mm:
    
    7211 1915 00
    
    Of high-strength steel
    
    Other:
    
    7211 1920 00
    
    Of a thickness exceeding 1.25 mm
    
    7211 1930 00
    
    Other
    
    Other:
    
    7211 1945 00
    
    Of high-strength steel
    
    Other:
    
    7211 1960 00
    
    Pickled
    
    7211 1975
    
    Other
    
    In coils:
    
    7211 1975 30
    
    With untrimmed edges
    
    7211 1975 60
    
    Other
    
    7211 1975 90
    
    Other
- Not further worked than cold-rolled (cold-reduced):
  - 7211 23
    
    Containing by weight less than 0.25 percent of carbon:
    
    Of a width of less than 300 mm:
    
    Of a thickness exceeding 1.25 mm:
    
    7211 2315 00
    
    Of high-strength steel
    
    7211 2320 00
    
    Other
    
    7211 2330 00
    
    Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
    
    7211 2345 00
    
    Of a thickness not exceeding 0.25 mm
    
    7211 2360
    
    Other
    
    7211 2360 30
    
    Of a thickness exceeding 1.25 mm
    
    7211 2360 60
    
    Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
    
    7211 2360 90
    
    Of a thickness not exceeding 0.25 mm:
  - 7211 29
    
    Other:
    
    Of a width of less than 300 mm:
    
    7211 2920
    
    Of a thickness exceeding 0.25 mm
    
    7211 2920 30
    
    Of a width less than 51 mm, in coils
    
    7211 2920 90
    
    Other
    
    7211 2945 00
    
    Other
    
    7211 2960
    
    Other
    
    7211 2960 30
    
    Of a thickness exceeding 1.25 mm
    
    7211 2960 80
    
    Other
- 7211 9000 00
  
  Other
7212

Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, clad, plated or coated:
- 7212 1000 00
  
  Plated or coated with tin
- 7212 2000 00
  
  Electrolytically plated or coated with zinc
- 7212 30
  
  Otherwise plated or coated with zinc:
  - Of a width of less than 300 mm:
    
    7212 3010
    
    Of a thickness exceeding 0.25 mm or more
    
    7212 3010 30
    
    Of a width less than 51 mm, in coils
    
    7212 3010 90
    
    Other
    
    7212 3030 00
    
    Other
  - 7212 3050 00
    
    Other
- 7212 40
  
  Painted, varnished or coated with plastics:
  - 7212 4010 00
    
    Of a width of less than 300 mm
  - 7212 4050 00
    
    Other
- 7212 5000 00
  
  Otherwise plated or coated
- 7212 6000 00
  
  Clad
7213

Bars and rods, hot-rolled, in irregularly wound coils, of iron or nonalloy steel:
- 7213 1000 00
  
  Concrete reinforcing bars and rods
- 7213 2000
  
  Other, of free-cutting steel
  - 7213 2000 10
    
    Containing by weight 0.1 percent or more of lead
  - 7213 2000 80
    
    Other
- Other:
  - 7213 91
    
    Of circular cross section measuring less than 14 mm in diameter:
    
    7213 9130
    
    Not tempered, not treated and not partly manufactured
    
    7213 9130 11
    
    Tire cord-quality steel wire rod of a kind described in statistical note 5 to this chapter
    
    7213 9130 15
    
    Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter
    
    7213 9130 20
    
    Of welding quality wire rods of a kind described in statistical note 7 to this chapter
    
    7213 9130 93
    
    Other
    
    Other:
    
    7213 9145 00
    
    Containing by weight 0.6 percent or more of carbon
    
    7213 9160 00
    
    Other
  - 7213 9900
    
    Other
    
    Of circular cross section:
    
    7213 9900 30
    
    With a diameter of 14 mm or more but less than 19 mm
    
    7213 9900 60
    
    With a diameter of 19 mm or more
    
    7213 9900 90
    
    Other
7214

Other bars and rods of iron or nonalloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
- 7214 1000 00
  
  Forged
- 7214 2000 00
  
  Concrete reinforcing bars and rods
- 7214 3000
  
  Other, of free-cutting steel
  - 7214 3000 10
    
    Containing by weight 0.1 percent or more of lead
  - 7214 3000 80
    
    Other
- Other:
  - 7214 9100
    
    Of rectangular (other than square) cross-section
    
    Containing by weight less than 0.25 percent of carbon:
    
    7214 9100 16
    
    With a maximum cross section less than 152 mm
    
    7214 9100 20
    
    With a maximum cross section of 152 mm or more
    
    7214 9100 60
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
    
    7214 9100 90
    
    Containing by weight 0.6 percent or more of carbon
  - 7214 9900
    
    Other
    
    Rounds:
    
    Containing by weight less than 0.25 percent of carbon:
    
    7214 9900 16
    
    With a diameter less than 76 mm
    
    7214 9900 21
    
    With a diameter of 76 mm or more but not exceeding 152 mm
    
    7214 9900 26
    
    With a diameter exceeding 152 mm
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
    
    7214 9900 31
    
    With a diameter less than 76 mm
    
    7214 9900 36
    
    With a diameter of 76 mm or more but not exceeding 152 mm
    
    7214 9900 40
    
    With a diameter exceeding 152 mm
    
    7214 9900 45
    
    Containing by weight 0.6 percent or more of carbon
    
    Other:
    
    7214 9900 60
    
    Containing by weight less than 0.25 percent of carbon
    
    7214 9900 75
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
    
    7214 9900 90
    
    Containing by weight 0.6 percent or more of carbon
7215

Other bars and rods of iron or nonalloy steel:
- 7215 1000
  
  Of free-cutting steel, not further worked than cold-formed or cold-finished
  - 7215 1000 10
    
    Containing by weight 0.1 percent or more of lead
  - 7215 1000 80
    
    Other
- 7215 5000
  
  Other, not further worked than cold-formed or cold-finished
  - Containing by weight less than 0.25 percent of carbon:
    
    7215 5000 16
    
    With a diameter or cross section measuring less than 76 mm
    
    7215 5000 18
    
    With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
    
    7215 5000 20
    
    With a diameter or cross section exceeding 228 mm
  - Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
    
    7215 5000 61
    
    With a diameter or cross section measuring less than 76 mm
    
    7215 5000 63
    
    With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
    
    7215 5000 65
    
    With a diameter or cross section exceeding 228 mm
  - 7215 5000 90
    
    Containing by weight 0.6 percent or more of carbon
- 7215 90
  
  Other:
  - Plated or coated with metal:
    
    7215 9010 00
    
    Not cold-formed
    
    7215 9030 00
    
    Cold-formed
  - 7215 9050 00
    
    Other
7216

Angles, shapes and sections of iron or nonalloy steel:
- 7216 1000
  
  U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm
  - 7216 1000 10
    
    U sections
  - 7216 1000 50
    
    Other
- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
  - 7216 2100 00
    
    L sections
  - 7216 2200 00
    
    T sections
- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
  - 7216 3100 00
    
    U sections
  - 7216 3200 00
    
    I sections (standard beams)
  - 7216 3300
    
    H sections
    
    7216 3300 30
    
    Weighing not more than 11.3 kg per 30.5 cm, with a web depth measuring 102 mm to 356 mm
    
    7216 3300 60
    
    Weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with a web depth measuring 203 mm to 457 mm
    
    7216 3300 90
    
    Other
- 7216 4000
  
  L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
  - 7216 4000 10
    
    L sections
  - 7216 4000 50
    
    Other
- 7216 5000 00
  
  Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
- Angles, shapes and sections, not further worked than cold-formed or cold-finished:
  - 7216 6100 00
    
    Obtained from flat-rolled products
  - 7216 6900 00
    
    Other
- Other:
  - 7216 9100
    
    Cold-formed or cold-finished from flat-rolled products
    
    7216 9100 10
    
    Drilled, notched, punched or cambered
    
    7216 9100 90
    
    Other
  - 7216 9900
    
    Other
    
    7216 9900 10
    
    Drilled, notched, punched or cambered
    
    7216 9900 90
    
    Other
7217

Wire of iron or nonalloy steel:
- 7217 10
  
  Not plated or coated, whether or not polished:
  - Containing by weight less than 0.25 percent of carbon:
    
    Flat wire:
    
    7217 1010 00
    
    Of a thickness not exceeding 0.25 mm
    
    7217 1020 00
    
    Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
    
    7217 1030 00
    
    Of a thickness exceeding 1.25 mm
    
    Round wire:
    
    7217 1040
    
    With a diameter of less than 1.5 mm
    
    Heat treated:
    
    7217 1040 40
    
    In coils weighing not more than 2 kilograms
    
    7217 1040 45
    
    Other
    
    7217 1040 90
    
    Other
    
    7217 1050
    
    With a diameter of 1.5 mm or more
    
    7217 1050 30
    
    Heat treated
    
    7217 1050 90
    
    Other
    
    7217 1060 00
    
    Other wire
  - Other:
    
    7217 1070 00
    
    Flat wire
    
    7217 1080
    
    Round wire
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon:
    
    7217 1080 10
    
    Heat treated
    
    7217 1080 20
    
    Other
    
    Containing by weight 0.6 percent or more of carbon:
    
    Heat treated:
    
    7217 1080 25
    
    With a diameter of less than 1.0 mm
    
    7217 1080 30
    
    With a diameter of 1.0 mm or more but less than 1.5 mm
    
    7217 1080 45
    
    With a diameter of 1.5 mm or more
    
    Other:
    
    7217 1080 60
    
    With a diameter of less than 1.0 mm
    
    7217 1080 75
    
    With a diameter of 1.0 mm or more but less than 1.5 mm
    
    7217 1080 90
    
    With a diameter of 1.5 mm or more
    
    7217 1090 00
    
    Other wire
- 7217 20
  
  Plated or coated with zinc:
  - 7217 2015 00
    
    Flat wire
  - Round wire:
    
    7217 2030 00
    
    With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
    
    7217 2045
    
    Other
    
    With a diameter of less than 1.0 mm:
    
    7217 2045 10
    
    Containing by weight less than 0.25 percent of carbon
    
    7217 2045 20
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
    
    7217 2045 30
    
    Containing by weight 0.6 percent or more of carbon
    
    With a diameter of 1.0 mm or more but less than 1.5 mm:
    
    7217 2045 40
    
    Containing by weight less than 0.25 percent of carbon
    
    7217 2045 50
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
    
    7217 2045 60
    
    Containing by weight 0.6 percent or more of carbon
    
    With a diameter of 1.5 mm or more:
    
    7217 2045 70
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
    
    7217 2045 80
    
    Containing by weight 0.6 percent or more of carbon
  - Other:
    
    7217 2060 00
    
    Containing by weight less than 0.25 percent of carbon
    
    7217 2075 00
    
    Other
- 7217 30
  
  Plated or coated with other base metals:
  - 7217 3015
    
    Flat wire
    
    7217 3015 30
    
    Containing by weight 0.6 percent or more of carbon
    
    7217 3015 60
    
    Other
  - Round wire:
    
    7217 3030 00
    
    With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon
    
    7217 3045
    
    Other
    
    7217 3045 04
    
    Containing by weight less than 0.20 percent of carbon, and suitable for electric arc welding
    
    Other:
    
    With a diameter of less than 1.0 mm:
    
    7217 3045 11
    
    Containing by weight less than 0.25 percent of carbon
    
    7217 3045 20
    
    Containing by weight 0.25 percent or more but less than 0.6 percent or carbon
    
    7217 3045 30
    
    Containing by weight 0.6 percent or more of carbon
    
    With a diameter of 1.0 mm or more but less than 1.5 mm:
    
    7217 3045 41
    
    Containing by weight less than 0.25 percent of carbon
    
    7217 3045 50
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
    
    7217 3045 60
    
    Containing by weight 0.6 percent or more of carbon
    
    7217 3045 90
    
    With a diameter of 1.5 mm or more
  - Other:
    
    7217 3060 00
    
    Containing by weight less than 0.25 percent of carbon
    
    7217 3075 00
    
    Other
- 7217 90
  
  Other:
  - 7217 9010 00
    
    Coated with plastics
  - 7217 9050
    
    Other
    
    7217 9050 30
    
    Containing by weight less than 0.25 percent of carbon
    
    7217 9050 60
    
    Containing by weight 0.25 percent or more but less than 0.6 percent of carbon
    
    7217 9050 90
    
    Containing by weight 0.6 percent or more of carbon
- III. STAINLESS STEEL
7218

Stainless steel in ingots or other primary forms; semi-finished products of stainless steel:
- 7218 1000 00
  
  Ingots and other primary forms
- Other:
  - 7218 9100
    
    Of rectangular (other than square) cross-section
    
    Having a width less than four times the thickness:
    
    7218 9100 15
    
    Having a cross-sectional area of less than 232 cm2
    
    7218 9100 30
    
    Having a cross-sectional area of 232 cm2 or more
    
    7218 9100 60
    
    Having a width at least four times the thickness
  - 7218 9900
    
    Other
    
    Of square cross section:
    
    7218 9900 15
    
    Having a cross-sectional area of less than 232 cm2
    
    7218 9900 30
    
    Having a cross-sectional area of 232 cm2 or more
    
    Of circular cross section:
    
    7218 9900 45
    
    Having a cross-sectional area of less than 232 cm2
    
    7218 9900 60
    
    Having a cross-sectional area of 232 cm2 or more
    
    7218 9900 90
    
    Other
7219

Flat-rolled products of stainless steel, of a width of 600 mm or more:
- Not further worked than hot-rolled, in coils:
  - 7219 1100
    
    Of a thickness exceeding 10 mm
    
    7219 1100 30
    
    Of a width not exceeding 1575 mm
    
    7219 1100 60
    
    Of a width exceeding 1575 mm
  - 7219 1200
    
    Of a thickness of 4.75 mm or more but not exceeding 10 mm
    
    7219 1200 02
    
    Not annealed or not pickled
    
    Other:
    
    7219 1200 06
    
    Of high-nickel alloy steel
    
    Other:
    
    Of a width of 1370 mm or more:
    
    Of a thickness exceeding 6.8 mm:
    
    7219 1200 21
    
    Of a width not exceeding 1575 mm
    
    7219 1200 26
    
    Of a width exceeding 1575 mm
    
    Other:
    
    7219 1200 51
    
    Of a width not exceeding 1575 mm
    
    7219 1200 56
    
    Of a width exceeding 1575 mm
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 1200 66
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7219 1200 71
    
    Other
    
    7219 1200 81
    
    Other
  - 7219 1300
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    7219 1300 02
    
    Not annealed or not pickled
    
    Other:
    
    7219 1300 31
    
    Of a width of 1370 mm or more
    
    Other:
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7219 1300 51
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7219 1300 71
    
    Other
    
    7219 1300 81
    
    Other
  - 7219 1400
    
    Of a thickness of less than 3 mm
    
    7219 1400 30
    
    Of a width of 1370 mm or more
    
    Other:
    
    7219 1400 65
    
    Of high-nickel alloy steel
    
    7219 1400 90
    
    Other
- Not further worked than hot-rolled, not in coils:
  - 7219 2100
    
    Of a thickness exceeding 10 mm
    
    7219 2100 05
    
    Of high-nickel alloy steel
    
    Other:
    
    7219 2100 20
    
    Of a width not exceeding 1575 mm
    
    7219 2100 40
    
    Of a width exceeding 1575 mm but not exceeding 1880 mm
    
    7219 2100 60
    
    Of a width exceeding 1880 mm
  - 7219 2200
    
    Of a thickness of 4.75 mm or more but not exceeding 10 mm
    
    7219 2200 05
    
    Of high-nickel alloy steel
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum:
    
    7219 2200 15
    
    Of a width not exceeding 1575 mm
    
    7219 2200 20
    
    Of a width exceeding 1575 mm but not exceeding 1880 mm
    
    7219 2200 25
    
    Of a width exceeding 1880 mm
    
    Other:
    
    7219 2200 35
    
    Of a width not exceeding 1575 mm
    
    7219 2200 40
    
    Of a width exceeding 1575 mm but not exceeding 1880 mm
    
    7219 2200 45
    
    Of a width exceeding 1880 mm
    
    Other:
    
    7219 2200 70
    
    Of a width not exceeding 1575 mm
    
    7219 2200 75
    
    Of a width exceeding 1575 mm but not exceeding 1880 mm
    
    7219 2200 80
    
    Of a width exceeding 1880 mm
  - 7219 2300
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    7219 2300 30
    
    Of a width of 1370 mm or more
    
    7219 2300 60
    
    Other
  - 7219 2400
    
    Of a thickness of less than 3 mm
    
    7219 2400 30
    
    Of a width of 1370 mm or more
    
    7219 2400 60
    
    Other
- Not further worked than cold-rolled (cold-reduced):
  - 7219 3100
    
    Of a thickness of 4.75 mm or more
    
    7219 3100 10
    
    In coils
    
    7219 3100 50
    
    Not in coils
  - 7219 3200
    
    Of a thickness of 3 mm or more but less than 4.75 mm
    
    In coils:
    
    Of a width of 1370 mm or more:
    
    7219 3200 05
    
    Of high-nickel alloy steel
    
    Other:
    
    7219 3200 20
    
    Containing more than 0.5 percent by weight of nickel
    
    7219 3200 25
    
    Other
    
    Other:
    
    7219 3200 35
    
    Of high-nickel alloy steel
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 3200 36
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7219 3200 38
    
    Other
    
    Other:
    
    7219 3200 42
    
    Containing less than 15 percent by weight of chromium
    
    7219 3200 44
    
    Other
    
    Not in coils:
    
    7219 3200 45
    
    Of a width of 1370 mm or more
    
    7219 3200 60
    
    Other
  - 7219 3300
    
    Of a thickness exceeding 1 mm but less than 3 mm
    
    In coils:
    
    Of a width of 1370 mm or more:
    
    7219 3300 05
    
    Of high-nickel alloy steel
    
    Other:
    
    7219 3300 20
    
    Containing more than 0.5 percent by weight of nickel
    
    7219 3300 25
    
    Other
    
    Other:
    
    7219 3300 35
    
    Of high-nickel alloy steel
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 3300 36
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7219 3300 38
    
    Other
    
    Other:
    
    7219 3300 42
    
    Containing less than 15 percent by weight of chromium
    
    7219 3300 44
    
    Other
    
    Not in coils:
    
    7219 3300 45
    
    Of a width of 1370 mm or more
    
    Other:
    
    7219 3300 70
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel
    
    7219 3300 80
    
    Other
  - 7219 3400
    
    Of a thickness of 0.5 mm or more but not exceeding 1 mm
    
    In coils:
    
    7219 3400 05
    
    Of high-nickel alloy steel
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 3400 20
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7219 3400 25
    
    Other
    
    Other:
    
    7219 3400 30
    
    Containing less than 15 percent by weight of chromium
    
    7219 3400 35
    
    Other
    
    7219 3400 50
    
    Not in coils
  - 7219 3500
    
    Of a thickness of less than 0.5 mm
    
    In coils:
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7219 3500 05
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7219 3500 15
    
    Other
    
    Other:
    
    7219 3500 30
    
    Containing less than 15 percent by weight of chromium
    
    7219 3500 35
    
    Other
    
    7219 3500 50
    
    Not in coils
- 7219 9000
  
  Other
  - 7219 9000 10
    
    Of high-nickel alloy steel
  - Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7219 9000 20
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7219 9000 25
    
    Other
    
    Other:
    
    7219 9000 60
    
    Containing less than 15 percent by weight of chromium
    
    7219 9000 80
    
    Other
7220

Flat-rolled products of stainless steel, of a width of less than 600 mm:
- Not further worked than hot-rolled:
  - 7220 1100 00
    
    Of a thickness of 4.75 mm or more
  - 7220 12
    
    Of a thickness of less than 4.75 mm:
    
    7220 1210 00
    
    Of a width of 300 mm or more
    
    7220 1250 00
    
    Of a width of less than 300 mm
- 7220 20
  
  Not further worked than cold-rolled (cold-reduced):
  - 7220 2010
    
    Of a width of 300 mm or more
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7220 2010 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7220 2010 15
    
    Other
    
    Other:
    
    7220 2010 60
    
    Containing less than 15 percent by weight of chromium
    
    7220 2010 80
    
    Other
  - Of a width of less than 300 mm:
    
    7220 2060
    
    Of a thickness exceeding 1.25 mm
    
    7220 2060 05
    
    Of high-nickel alloy steel
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7220 2060 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7220 2060 15
    
    Other
    
    Other:
    
    7220 2060 60
    
    Containing less than 15 percent by weight of chromium
    
    7220 2060 80
    
    Other
    
    7220 2070
    
    Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
    
    7220 2070 05
    
    Of high-nickel alloy steel
    
    Other:
    
    Containing more than 0.5 percent by weight of nickel:
    
    7220 2070 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7220 2070 15
    
    Other
    
    Other:
    
    7220 2070 60
    
    Containing less than 15 percent by weight of chromium
    
    7220 2070 80
    
    Other
    
    Of a thickness not exceeding 0.25 mm:
    
    7220 2080 00
    
    Razor blade steel
    
    7220 2090
    
    Other
    
    7220 2090 30
    
    Containing more than 0.5 percent but less than 24 percent by weight of nickel
    
    7220 2090 60
    
    Other
- 7220 9000
  
  Other
  - Containing more than 0.5 percent but less than 24 percent by weight of nickel:
    
    7220 9000 10
    
    Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
    
    7220 9000 15
    
    Other
  - Other:
    
    7220 9000 60
    
    Containing less than 15 percent by weight of chromium
    
    7220 9000 80
    
    Other
7221 0000

Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
- 7221 0000 05
  
  Of high-nickel alloy steel
- Other:
  - Of circular cross section:
    
    With a diameter of less than 14 mm:
    
    7221 0000 17
    
    Containing less than 8 percent by weight of nickel
    
    7221 0000 18
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
    
    7221 0000 30
    
    With a diameter of 14 mm or more but less than 19 mm
    
    7221 0000 45
    
    With a diameter of 19 mm or more
  - 7221 0000 75
    
    Other
7222

Other bars and rods of stainless steel; angles, shapes and sections of stainless steel:
- Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
  - 7222 1100
    
    Of circular cross-section
    
    7222 1100 01
    
    Electroslag or vacuum arc remelted
    
    7222 1100 06
    
    Of high-nickel alloy steel
    
    Other:
    
    With a maximum cross-sectional dimension of less than 152.4 mm:
    
    7222 1100 57
    
    Containing less than 8 percent by weight of nickel
    
    7222 1100 59
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
    
    With a maximum cross-sectional dimension of 152.4 mm or more:
    
    7222 1100 82
    
    Containing less than 8 percent by weight of nickel
    
    7222 1100 84
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
  - 7222 1900
    
    Other
    
    7222 1900 01
    
    Electroslag or vacuum arc remelted
    
    Other:
    
    7222 1900 06
    
    Of high-nickel alloy steel
    
    Other:
    
    7222 1900 52
    
    Containing less than 8 percent by weight of nickel
    
    7222 1900 54
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
- 7222 2000
  
  Bars and rods, not further worked than cold-formed or cold-finished
  - 7222 2000 01
    
    Electroslag or vacuum arc remelted
  - 7222 2000 06
    
    Of high-nickel alloy steel
  - Other:
    
    Of a circular cross-section:
    
    With a maximum circular cross-sectional dimension of less than 18 mm:
    
    7222 2000 41
    
    Containing less than 8 percent by weight of nickel
    
    7222 2000 43
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
    
    With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm:
    
    7222 2000 62
    
    Containing less than 8 percent by weight of nickel
    
    7222 2000 64
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
    
    With a maximum circular cross-sectional dimension of 152.4 mm or more:
    
    7222 2000 67
    
    Containing less than 8 percent by weight of nickel
    
    7222 2000 69
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
    
    Other:
    
    7222 2000 71
    
    Containing less than 8 percent by weight of nickel
    
    7222 2000 73
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
- 7222 3000
  
  Other bars and rods
  - 7222 3000 01
    
    Electroslag or vacuum arc remelted
  - 7222 3000 12
    
    Of high-nickel alloy steel
  - Other:
    
    With a maximum cross-sectional dimension of less than 152.4 mm:
    
    7222 3000 22
    
    Containing less than 8 percent by weight of nickel
    
    7222 3000 24
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
    
    With a maximum cross-sectional dimension of 152.4 mm or more:
    
    7222 3000 82
    
    Containing less than 8 percent by weight of nickel
    
    7222 3000 84
    
    Containing 8 percent or more but less than 24 percent by weight of nickel
- 7222 40
  
  Angles, shapes and sections:
  - 7222 4030
    
    Hot-rolled, not drilled, not punched and not otherwise advanced
    
    With a maximum cross-sectional dimension of 80 mm or more:
    
    7222 4030 25
    
    Angles
    
    7222 4030 45
    
    Other
    
    With a maximum cross-sectional dimension of less than 80 mm:
    
    7222 4030 65
    
    Angles
    
    7222 4030 85
    
    Other
  - 7222 4060 00
    
    Other
7223 00

Wire of stainless steel:
- 7223 0010
  
  Round wire
  - 7223 0010 05
    
    Spring round wire of a kind described in statistical note 8 to this chapter
  - Other:
    
    7223 0010 16
    
    With a diameter of less than 0.25 mm
    
    7223 0010 31
    
    With a diameter of 0.25 mm or more but less than 0.76 mm
    
    7223 0010 46
    
    With a diameter of 0.76 mm or more but less than 1.52 mm
    
    7223 0010 61
    
    With a diameter of 1.52 mm or more but less than 5.1 mm
    
    7223 0010 76
    
    With a diameter of 5.1 mm or more
- 7223 0050 00
  
  Flat wire
- 7223 0090 00
  
  Other
- IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NONALLOY STEEL
7224

Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel:
- 7224 1000
  
  Ingots and other primary forms
  - 7224 1000 05
    
    Of high-nickel alloy steel
  - Other:
    
    7224 1000 45
    
    Of tool steel
    
    7224 1000 75
    
    Other
- 7224 9000
  
  Other
  - 7224 9000 05
    
    Of high-nickel alloy steel
  - Other:
    
    Of tool steel:
    
    Of rectangular (including square) cross section:
    
    7224 9000 15
    
    Having a width less than four times the thickness
    
    7224 9000 25
    
    Having a width at least four times the thickness
    
    7224 9000 35
    
    Other
    
    Other:
    
    Of rectangular (including square) cross section:
    
    7224 9000 45
    
    Having a width less than four times the thickness
    
    7224 9000 55
    
    Having a width at least four times the thickness
    
    7224 9000 65
    
    Of circular cross section
    
    7224 9000 75
    
    Other
7225

Flat-rolled products of other alloy steel, of a width of 600 mm or more:
- Of silicon electrical steel:
  - 7225 1100 00
    
    Grain-oriented
  - 7225 1900 00
    
    Other
- 7225 30
  
  Other, not further worked than hot-rolled, in coils:
  - Of a thickness of 4.75 mm or more:
    
    7225 3011
    
    Of tool steel
    
    7225 3011 10
    
    Of high-speed steel
    
    7225 3011 80
    
    Other
    
    7225 3030
    
    Other
    
    7225 3030 05
    
    Of high-nickel alloy steel
    
    7225 3030 50
    
    Other
  - Of a thickness of less than 4.75 mm:
    
    7225 3051
    
    Of tool steel
    
    7225 3051 10
    
    Of high-speed steel
    
    7225 3051 80
    
    Other
    
    7225 3070 00
    
    Other
- 7225 40
  
  Other, not further worked than hot-rolled, not in coils:
  - Of a thickness of 4.75 mm or more:
    
    7225 4011
    
    Of tool steel
    
    7225 4011 10
    
    Of high-speed steel
    
    7225 4011 80
    
    Other
    
    7225 4030
    
    Other
    
    7225 4030 05
    
    Of high-nickel alloy steel
    
    7225 4030 50
    
    Other
  - Of a thickness of less than 4.75 mm:
    
    7225 4051
    
    Of tool steel
    
    7225 4051 10
    
    Of high-speed steel
    
    7225 4051 30
    
    Of ball-bearing steel
    
    7225 4051 60
    
    Other
    
    7225 4070 00
    
    Other
- 7225 50
  
  Other, not further worked than cold-rolled (cold-reduced):
  - 7225 5011
    
    Of tool steel
    
    7225 5011 10
    
    Of high-speed steel
    
    7225 5011 30
    
    Of ball-bearing steel
    
    7225 5011 60
    
    Other
  - Other:
    
    7225 5060 00
    
    Of a thickness of 4.75 mm or more
    
    Of a thickness of less than 4.75 mm:
    
    7225 5070 00
    
    Heat-resisting steel
    
    7225 5080
    
    Other
    
    7225 5080 10
    
    Of high-nickel alloy steel
    
    7225 5080 80
    
    Other
- Other:
  - 7225 9100 00
    
    Electrolytically plated or coated with zinc
  - 7225 9200 00
    
    Otherwise plated or coated with zinc
  - 7225 9900
    
    Other
    
    7225 9900 10
    
    Of high-nickel alloy steel
    
    7225 9900 90
    
    Other
7226

Flat-rolled products of other alloy steel, of a width of less than 600 mm:
- Of silicon electrical steel:
  - 7226 11
    
    Grain-oriented:
    
    7226 1110 00
    
    Of a width of 300 mm or more
    
    7226 1190
    
    Of a width of less than 300 mm
    
    7226 1190 30
    
    Of thickness not exceeding 0.25 mm
    
    7226 1190 60
    
    Other
  - 7226 19
    
    Other:
    
    7226 1910 00
    
    Of a width of 300 mm or more
    
    7226 1990 00
    
    Of a width of less than 300 mm
- 7226 2000 00
  
  Of high-speed steel
- Other:
  - 7226 91
    
    Not further worked than hot-rolled:
    
    Of tool steel (other than high-speed steel):
    
    7226 9105 00
    
    Of chipper knife steel
    
    Other:
    
    7226 9115
    
    Of a width of 300 mm or more
    
    7226 9115 30
    
    Of ball-bearing steel
    
    7226 9115 60
    
    Other
    
    7226 9125
    
    Of a width of less than 300 mm
    
    7226 9125 30
    
    Of ball-bearing steel
    
    7226 9125 60
    
    Other
    
    Other:
    
    7226 9150 00
    
    Of a thickness of 4.75 mm or more
    
    Of a thickness of less than 4.75 mm:
    
    7226 9170 00
    
    Of a width of 300 mm or more
    
    7226 9180 00
    
    Of a width of less than 300 mm
  - 7226 92
    
    Not further worked than cold-rolled (cold-reduced):
    
    Of tool steel (other than high-speed steel):
    
    7226 9210
    
    Of a width of 300 mm or more
    
    7226 9210 30
    
    Of ball-bearing steel
    
    7226 9210 60
    
    Other
    
    7226 9230
    
    Of a width of less than 300 mm
    
    7226 9230 30
    
    Of ball-bearing steel
    
    7226 9230 60
    
    Other
    
    Other:
    
    7226 9250 00
    
    Of a width of 300 mm or more
    
    Of a width of less than 300 mm:
    
    7226 9270
    
    Of a thickness not exceeding 0.25 mm
    
    7226 9270 05
    
    Of high-nickel alloy steel
    
    7226 9270 50
    
    Other
    
    7226 9280
    
    Of a thickness exceeding 0.25 mm
    
    7226 9280 05
    
    Of high-nickel alloy steel
    
    7226 9280 50
    
    Other
  - 7226 9901
    
    Other
    
    7226 9901 10
    
    Electrolytically plated or coated with zinc
    
    7226 9901 30
    
    Otherwise plated or coated with zinc
    
    7226 9901 80
    
    Other
7227

Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel:
- 7227 1000 00
  
  Of high-speed steel
- 7227 2000
  
  Of silico-manganese steel
  - 7227 2000 30
    
    Of welding quality wire rods of a kind described in statistical note 7 to this chapter
  - 7227 2000 80
    
    Other
- 7227 90
  
  Other:
  - Of tool steel (other than high-speed steel):
    
    7227 9010
    
    Not tempered, not treated, and not partly manufactured
    
    7227 9010 30
    
    Of ball-bearing steel
    
    7227 9010 60
    
    Other
    
    7227 9020
    
    Other
    
    7227 9020 30
    
    Of ball-bearing steel
    
    7227 9020 60
    
    Other
  - 7227 9060
    
    Other
    
    7227 9060 05
    
    Of high-nickel alloy steel
    
    7227 9060 10
    
    Of Cold Heading Quality (CHQ) steel of a kind described in statistical note 6 to this chapter
    
    7227 9060 20
    
    Of welding quality wire rods of a kind described in statistical note 7 to this chapter
    
    Of a circular cross section:
    
    7227 9060 30
    
    With a diameter of less than 14 mm
    
    7227 9060 35
    
    With a diameter of 14 mm or more but less than 19 mm
    
    7227 9060 40
    
    With a diameter of 19 mm or more
    
    7227 9060 90
    
    Other
7228

Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel:
- 7228 1000
  
  Bars and rods, of high-speed steel
  - 7228 1000 10
    
    Not cold-formed
  - Cold-formed:
    
    7228 1000 30
    
    With a maximum cross-sectional dimension of less than 18 mm
    
    7228 1000 60
    
    With a maximum cross-sectional dimension of 18 mm or more
- 7228 20
  
  Bars and rods, of silico-manganese steel:
  - 7228 2010 00
    
    Not cold-formed
  - 7228 2050 00
    
    Cold-formed
- Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
  - 7228 30
    
    Of tool steel (other than high-speed steel):
    
    7228 3020 00
    
    Of ball-bearing steel
    
    7228 3040 00
    
    Of chipper knife steel, not cold-formed
    
    7228 3060 00
    
    Other
  - 7228 3080
    
    Other
    
    7228 3080 05
    
    Of high-nickel alloy steel
    
    7228 3080 10
    
    Concrete reinforcing bars and rods
    
    Other:
    
    7228 3080 15
    
    With a diameter or cross section measuring less than 76 mm
    
    7228 3080 41
    
    With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm
    
    7228 3080 45
    
    With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm
    
    7228 3080 70
    
    With a diameter or cross section exceeding 228 mm
- 7228 4000 00
  
  Other bars and rods, not further worked than forged
- 7228 50
  
  Other bars and rods, not further worked than cold-formed or cold-finished:
  - 7228 5010
    
    Of tool steel (other than high-speed steel)
    
    7228 5010 10
    
    Of ball-bearing steel
    
    Other:
    
    With a maximum cross-sectional dimension of less than 18 mm:
    
    7228 5010 20
    
    Of round or rectangular cross section with surfaces ground, milled or polished
    
    7228 5010 40
    
    Other
    
    With a maximum cross-sectional dimension of 18 mm or more:
    
    7228 5010 60
    
    Of round or rectangular cross section with surfaces ground, milled or polished
    
    7228 5010 80
    
    Other
  - 7228 5050
    
    Other
    
    7228 5050 05
    
    Of high-nickel alloy steel
    
    Other:
    
    7228 5050 15
    
    With a diameter or cross section measuring less than 76 mm
    
    7228 5050 40
    
    With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
    
    7228 5050 70
    
    With a diameter or cross section exceeding 228 mm
- 7228 60
  
  Other bars and rods:
  - 7228 6010
    
    Of tool steel (other than high-speed steel)
    
    7228 6010 30
    
    Of ball-bearing steel
    
    7228 6010 60
    
    Other
  - Other:
    
    7228 6060 00
    
    Not cold-formed
    
    7228 6080 00
    
    Cold-formed
- 7228 70
  
  Angles, shapes and sections:
  - 7228 7030
    
    Hot-rolled, not drilled, not punched and not otherwise advanced
    
    7228 7030 10
    
    U, I, H and T sections
    
    Other:
    
    With a maximum cross-sectional dimension of 76 mm or more:
    
    7228 7030 20
    
    Angles
    
    7228 7030 41
    
    Other
    
    With a maximum cross-sectional dimension of less than 76 mm:
    
    7228 7030 60
    
    Angles
    
    7228 7030 81
    
    Other
  - 7228 7060 00
    
    Other
- 7228 8000 00
  
  Hollow drill bars and rods
7229

Wire of other alloy steel:
- 7229 2000
  
  Of silico-manganese steel
  - Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding:
    
    7229 2000 10
    
    Plated or coated with copper
    
    7229 2000 15
    
    Other
  - 7229 2000 90
    
    Other
- 7229 90
  
  Other:
  - 7229 9005 00
    
    Of high-speed steel
  - Other:
    
    7229 9010 00
    
    Flat wire
    
    7229 9050
    
    Round wire
    
    With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding:
    
    7229 9050 06
    
    Plated or coated with copper
    
    7229 9050 08
    
    Other
    
    Other:
    
    7229 9050 16
    
    With a diameter of less than 1.0 mm
    
    7229 9050 31
    
    With a diameter of 1.0 mm or more but less than 1.5 mm
    
    7229 9050 51
    
    With a diameter of 1.5 mm or more
    
    7229 9090 00
    
    Other wire