5202.99.30.00 - Other ๐ฉ
Details
| Field | Value |
|---|---|
| Unit of Quantity | kg |
| General Rate of Duty (Column 1 - General) | 7.8ยข/kg |
| Special Rate of Duty (Column 1 - Special) | Free (A+,AU,BH,CL,CO,JO,KR,MA,OM,P,PE,S,SG) 0.7ยข/kg (PA)
A+
๐ฆ๐ซ
๐ฆ๐ด
๐ง๐ฏ
๐ง๐น
๐ง๐ซ
๐ง๐ฎ
๐ฐ๐ญ
๐จ๐ซ
๐น๐ฉ
๐ฐ๐ฒ
๐จ๐ฉ
๐ฉ๐ฏ
๐ช๐น
๐ฌ๐ฒ
๐ฌ๐ณ
๐ฌ๐ผ
๐ญ๐น
๐ฐ๐ฎ
๐ฑ๐ธ
๐ฑ๐ท
๐ฒ๐ฌ
๐ฒ๐ผ
๐ฒ๐ฑ
๐ฒ๐ท
๐ฒ๐ฟ
๐ฒ๐ฒ
๐ณ๐ต
๐ณ๐ช
๐ท๐ผ
๐ผ๐ธ
๐ธ๐ณ
๐ธ๐ฑ
๐ธ๐ง
๐ธ๐ด
๐ธ๐ธ
๐ธ๐น
๐น๐ฟ
๐น๐ฑ
๐น๐ฌ
๐น๐ป
๐บ๐ฌ
๐ป๐บ
๐พ๐ช
๐ฟ๐ฒ
AU
๐ฆ๐บ
BH
๐ง๐ญ
CL
๐จ๐ฑ
CO
๐จ๐ด
JO
๐ฏ๐ด
KR
๐ฐ๐ท
MA
๐ฒ๐ฆ
OM
๐ด๐ฒ
P
๐จ๐ท
๐ฉ๐ด
๐ธ๐ป
๐ฌ๐น
๐ญ๐ณ
๐ณ๐ฎ
PA
๐ต๐ฆ
PE
๐ต๐ช
S
๐จ๐ฆ
๐ฒ๐ฝ
SG
๐ธ๐ฌ
|
| Column 2 Rate of Duty | 9.2ยข/kg |
| Quota Quantity | N/A |
| Additional Duties | N/A |
Overview
This HTS classification, 5202.99.30.00, encompasses "Other" cotton waste, specifically referring to card strips made from cotton with a staple length under 30.1625 mm (1-3/16 inches) and lap waste, sliver waste, and roving waste. These categories represent byproducts and residual materials generated during various stages of cotton processing, from carding to spinning, that do not fit into more specific waste classifications.
This classification is distinct from its siblings, 5202.99.05.00 and 5202.99.10.00, which are reserved for goods that qualify for specific tariff provisions outlined in general note 15 and additional U.S. note 9 to Chapter 52, respectively. Unlike those categories which are defined by specific tariff treatment, 5202.99.30.00 is a residual category for cotton waste that does not meet the criteria for those special provisions or other more detailed classifications within the 5202 heading.
As a leaf node, this classification has no further subcategories. Therefore, the focus for classification under 5202.99.30.00 is on the physical characteristics and origin of the cotton waste. Key determinative factors include confirming the material is indeed cotton, that it originates from waste streams such as card strips, lap, sliver, or roving, and that the staple length of the cotton fibers within the card strips is less than the specified 30.1625 mm. Careful examination of the production process and the physical form of the waste is crucial for accurate classification.